Easiest Method Carpenters Use To Layout And Install Stair Skirt Boards - Finishing Trim Examples
ฝัง
- เผยแพร่เมื่อ 20 ก.ค. 2023
- www.homebuildingandrepairs.com Visit our website to learn more about home building, stair construction and do it yourself money saving ideas for your next project. In this video I will provide you with what I believe to be the easiest, simplest and bestest method to install stair skirt boards on existing homes or in new construction.
- แนวปฏิบัติและการใช้ชีวิต
I hope this is for remodels. If you’re stuck with this method in new construction, then the contractor messed up. The REAL easiest method is to space the stringers off of the framed wall with a 2x. This leaves room for the drywall and skirt board to be installed with no notches other than top and bottom. Then treads or carpet can be installed to cover the remaining 1/8 to 1/4quarter inch gap.
If it wasn't for remodels and the contractor did mess up, then here's something that could solve their problem.
Thank you for all the time and effort you put into all your videos. They are very helpful and informative.
My pleasure!
Thanks for this information it’s helpful
OMG muchas gracias for all the time and details it’s very helpful, l do appreciate it 💞
No problem 😊
How would you go about layout for a stair case that doesn't have 90 degrees steps. If the risers has a back cut for instances.
So the treads are level with the floor, but the risers aren't. So the tread could be at an 80 degrees angle for example to allow for more purches on the tread.
How do you make it look like one board?
Is it recommend to cut the first notch out at the floor level, then slide the skirt onto the floor, then mark out your treads and risers?
For some designs, yes. Good point.
Do you have a video that explains how to do this with a rounded edge step?
No, but plan on making one, just don't know when.
If we have notches on the stairs, how do we measure for that?
I will be making more videos on how to layout for nosing's, but if you need different notches, let me know what type.
I have a 90° staircase (4 steps creating 90° to the straight run above) that I'd like to add a skirt to. Trouble is that when I lay the 1x12 in position for marking, the two bottom steps sit about 2 inches below the positioned skirt board. The 2 angled steps that create the 90° staircase sit level with the board and seem easy to mark. Is there a way to make the bottom 2 steps work for skirting?
Can you make a youtube video and put a link to here.
Did the video help?
@@RoughHouseRock I did not receive a video link. You can post it here or email it to me and let me know when you sent it. Don't forget to use our website contact information.
I see the video in the reply above. However, could you send the email address so I'm sure? Thank you @@stairbuilding
@@RoughHouseRock I'm sorry, I can't see the link, so email it to me. You can get our email address at our website on any page at the bottom where it says contact.
My one is different how i can cut it ?
I use circular saw and hand saw.
My stairs are not straight. Do you have some video for us ? I will be happy to share it with my friends ❤
where are the videos for this if the steps are all different?
Here's a link to the playlist. th-cam.com/video/kIjmHHAqH-I/w-d-xo.html
Waiting for that video where the board doesn’t rest on all the treads
👀
If it's not on playlist, then can you provide more details along with the waiting for????
You mentioned making a video at 0:50 where you address what to do when the board doesn’t touch all the steps
How should i go about making a skirt board on an old set of stairs that are un even and when a board is laid over them not every stair touches the straight board.
@@stairbuilding Sorry, didn't mean to come off as rude.