hello frined, your video is very useful. Thanks for your efforts. further, is there any solution for finding the Height of obstacles in the line of sight?
you can use Cambium link planner software and other third party software . but all will so you as per google earth data . for clearing of obstacles you just add some extra margin of height in your link. if link is short distance then possible to physically work out but for long distance you have to add extra height as per any link planer software show feasibility for safer side. because every software will take data from google earth so we can not expect 100% correct
Alright Sir, this is a basic Step for beginner you can use this for short distance and with this you can also use many third party software to calculate your Fresnel zone and feasibility .
Dear Sir...very good presentation. please tell some tools name to check Fresnel zone and feasibility. I am planning to connect my office to showroom. distance around 1Km but there is big building in middle the height of office 10 meter and showroom 15 meter. please give your suggestion. thx
@@TechTricksZone I doing site survey point to point wireless connection distance 100 km with high building the middle of point to point, How can I do it for good signal?
Dear Prakash if the high tension power line just going parallel to your Wireless Link then it will be more loss but if its only crossing in one place then its not do much loss . if between high tension line and RF link more then 1-2 meter distance then i dnt think its get more loss. just it should not to near to or cross where RF device installed .
I need you to assist to look into this.... Here are my coordinate.. Site A: 11.5743° N, 8.3316° E Site B: 11.4826° N, 8.5125° E Both location have mast of 40 meters. Is there clear line of site??????
Sir My name is dastagiri...from a.p.it is very useful information to me and thanks you.But I want built wireless bridge between 8km wit air grid m5 hp...with rx and tx......so point A to point B..is very esay to buit in my site. But between point A and B ...there is present two height voltage transmission lines.....can it is possible to get signal point A to B easily......could you give me your mobile number please ....
High voltage Transmission line can effect throughput due to electric interference but if you give sufficient space between wireless ptp and voltage line than you can avoid most of disturbance due to electric interference
Good Effort Realy HelpFull
hello frined, your video is very useful. Thanks for your efforts.
further, is there any solution for finding the Height of obstacles in the line of sight?
you can use Cambium link planner software and other third party software . but all will so you as per google earth data . for clearing of obstacles you just add some extra margin of height in your link. if link is short distance then possible to physically work out but for long distance you have to add extra height as per any link planer software show feasibility for safer side. because every software will take data from google earth so we can not expect 100% correct
please subscribe if this channel helpful for you and for more tutorials
Software already calculate extra height for that visit airlink.ubnt.com
dear thank you do you have pathloss software
nice information thank you so mach
Although this may help in smaller links but this is not a correct way Sir.....you need to take care of Fresnel zone as well.
Alright Sir, this is a basic Step for beginner you can use this for short distance and with this you can also use many third party software to calculate your Fresnel zone and feasibility .
Any easy way to calculate distance and height. Any software by which we can calculate distance and height of two sights.
do what u want to do
not only comment
Very good information . Tell us can we get hight of trees in point to point link
you can calculate stander aprox size of trees to make site survey
Dear Sir...very good presentation. please tell some tools name to check Fresnel zone and feasibility. I am planning to connect my office to showroom. distance around 1Km but there is big building in middle the height of office 10 meter and showroom 15 meter. please give your suggestion. thx
You an use cambium Link planner and google for more Paid and free Link Planner tools
i think less than 1KM distance doesnt need to consider the fresnel zone, its only effective when earth's curvature matters
ok for one km NLOS Solution available on the RF Link. what is bandwidth required.
Thank you
Welcome . also get more informative guide at TechTrickszone.com
@@TechTricksZone I doing site survey point to point wireless connection distance 100 km with high building the middle of point to point, How can I do it for good signal?
Thanks
good information
Hi your video is nice, how to consider if high tension power lines are crossing our LOS path,how loses will be calculated.
Dear Prakash if the high tension power line just going parallel to your Wireless Link then it will be more loss but if its only crossing in one place then its not do much loss . if between high tension line and RF link more then 1-2 meter distance then i dnt think its get more loss. just it should not to near to or cross where RF device installed .
Great video! I need to build p2p link within 16km. Can u suggest me devices for it?
Line of Sight should be clear first and . you can mail me techtricks010@gmail.com i will suggest device in mail
TechTricks Zone hi, i sent u an email. Could u check and get back to me please?
Where you want to install for 16 km.
I need you to assist to look into this....
Here are my coordinate..
Site A: 11.5743° N, 8.3316° E
Site B: 11.4826° N, 8.5125° E
Both location have mast of 40 meters.
Is there clear line of site??????
This video should have been 20seconds long.
DEar sir!!!
I want coonect about 40 kilimomitre broadband link. Which would be best for me??
40Km Wireless Connectivity will be very costly because in wireless line of sight would be must . so wireless device will be costly for long distance.
please do share GPS Co-ordinate of both end. what is the bandwidth minimum bandwidth requirement on wireless link at remote end.
there is many option for broadband link. what is bandwidth needed.
For ptp if the cpe is in higher level then the bts will it be feasible. The distance is 2.5 km
doent matter if its higher or lower. if line of sight is clear than point to point link can work
How to find hight tower to insall power through Google Earth kindly guide me...
you need to check both side see level height difference+both side building height difference to calculate tower height required for feasibility.
TechTricks Zone how to check building hieghts... Kindly gide me
Calculate the buidling floor EXP- suppose buiding 3 floor than building height Aprox- 3X10= 30 Ft is the building height
TechTricks Zone ok...try it...
TechTricks Zone where are you from?
how did you compute for tower height?
compare the both side sea lable differnece and add the building hiehgt in both side and calculate tower required
try this- techtrickszone.com/2018/05/21/how-to-check-tower-height-point-to-point-in-google-earth/
I can't deal with this lol Watching this typing is just way to tedious. Couldn't you just have narrated it or something?
techtrickszone.com/2018/05/21/how-to-check-tower-height-point-to-point-in-google-earth/
Aisi videos ki samj nahi ati jis mein bol ker bataya na gaya ho.
Sir
My name is dastagiri...from a.p.it is very useful information to me and thanks you.But I want built wireless bridge between 8km wit air grid m5 hp...with rx and tx......so point A to point B..is very esay to buit in my site. But between point A and B ...there is present two height voltage transmission lines.....can it is possible to get signal point A to B easily......could you give me your mobile number please ....
High voltage Transmission line can effect throughput due to electric interference but if you give sufficient space between wireless ptp and voltage line than you can avoid most of disturbance due to electric interference