To set one to master and one to slave, WHICH WIRE DO YOU HOLD THE BLUE TO?????????????????????????????????? A close up shot of which wires to connect would help greatly.
Hold the blue (flash pattern changer) wire to ground for 3 seconds. If all LEDS turn on, this indicates master mode. If no LEDs activate, this indicates slave mode.
You take the Blue pattern change wire and hold it to Ground for (3) Seconds.If all of the lights come on then that means it is the leader and if no lights come on then that means it is a follower
Hi! This is what you will need to do to sync the T3's:SETTING MASTER/SLAVE 1) Apply 12v (+) power and 12v (-) ground to the unit. 2) For the light heads to alternate, one light head must be set as master and the other set as slave. To do so, hold the blue (flash pattern changer) wire to ground for 3 seconds. If all LEDS turn on, this indicates master mode. If no LEDs activate, this indicates slave mode. PATTERNS & SYNCHRONIZATION 1) Momentarily tap the blue wire to a ground 12v (-) source to cycle through the flash patterns. 2) Synchronization: To synchronize two or more T3 units together: A) Choose the desired flash pattern for each unit. B) Connect the blue wires of the light heads together. To achieve syncronization, the patterns must match on all products connected to the synchornization circuit. Each time the master/slave mode is set, the pattern will reset to the default setting (Single Flash [Slow]). This simplifies the process of synchronizing two or more compatible products
Sorry the T3 is not able to do a steady on.Our UBL ilumex Surface Mount is able to do a steady on though! ultrabrightlightz.com/products/ubl-ilumex-surface-mount?_pos=1&_sid=397fb01a5&_ss=r
So these could theoretically be used a brake lights if the pattern is set right?
To set one to master and one to slave, WHICH WIRE DO YOU HOLD THE BLUE TO?????????????????????????????????? A close up shot of which wires to connect would help greatly.
Hold the
blue (flash pattern changer) wire to ground for 3 seconds.
If all LEDS turn on, this indicates master mode. If no LEDs
activate, this indicates slave mode.
This video helped a lot. Thank you
You're welcome!
Can the T3s be synced with the Fusion 2x dash light as long as they’re the same “version”?
Sorry the Feniex T3 modules cannot be synced with a Fusion Dash Light even if they are the same version
What is the amount of flash patterns for the “alternating/wig-wag” master slave?
11 patterns
@@UltraBrightLightz Okay thank you much
@@LionSynEscanor You're welcome!
Is there anyway to remove it from master/slave mode. I got the Feniex 4200 mini and the master/ slave mode is messing everything up.
You take the Blue pattern change wire and hold it to Ground for (3) Seconds.If all of the lights come on then that means it is the leader and if no lights come on then that means it is a follower
How i can sync 6 t3 leds in the grill?
3pcs in left and 3pcs in right
Hi! This is what you will need to do to sync the T3's:SETTING MASTER/SLAVE
1) Apply 12v (+) power and 12v (-) ground to the unit.
2) For the light heads to alternate, one light head must be
set as master and the other set as slave. To do so, hold the
blue (flash pattern changer) wire to ground for 3 seconds.
If all LEDS turn on, this indicates master mode. If no LEDs
activate, this indicates slave mode.
PATTERNS & SYNCHRONIZATION
1) Momentarily tap the blue wire to a ground 12v (-) source
to cycle through the flash patterns.
2) Synchronization: To synchronize two or more T3 units
together:
A) Choose the desired flash pattern for each unit.
B) Connect the blue wires of the light heads
together.
To achieve syncronization, the patterns must match on all
products connected to the synchornization circuit.
Each time the master/slave mode is set, the pattern will reset
to the default setting (Single Flash [Slow]). This simplifies the
process of synchronizing two or more compatible products
👍😉😀
Are T3's wires copper or aluminium?
Please reach out to Feniex Tech Support and they will be able to assist you! 1-800-615-8350
can they be continuous on
Sorry the T3 is not able to do a steady on.Our UBL ilumex Surface Mount is able to do a steady on though! ultrabrightlightz.com/products/ubl-ilumex-surface-mount?_pos=1&_sid=397fb01a5&_ss=r
@@UltraBrightLightz It does steady on at 10%, taillight mode. But thanks I thought it did steady on at other intensities.Thaniis
@@johnmontana18 You're welcome!