😀 Hello There amazing person!! Recently we posted a new video with a mess made on the installation of a Timer Control. Check the link down below and leave your comments, hit that bell, and subscribe. See you in the next video. 🤗 Timer Control Installation made right - Easy Guide - th-cam.com/video/lK9hAWYhC04/w-d-xo.html
Thank you for Stop by our channel. We are glad that our video helped you solve your problem. Come back later, we will bring more videos related to this.
Drice Walker is a Brazilian-born wacky character. This character was created to deliver messages online in the name of our sponsors: The Ultimate Pro and The Ultimate Handyman, but the accent is an original trait of the actor and owner of the companies aforementioned.
Very nice, exactly what i needed, i was blew fuses x 2, and finally found your video. So well presented, I understood your explanations of how this timer works. Really nice service to us all. Thank you, Diego
Hey Garrett George , your wish just realized. Check our new video about Retaining Walls. Let us know your comments 👋 > th-cam.com/video/vZrlCyod-vE/w-d-xo.html
I am wanting to switch my timer over to 240 as well I change the switch on the back but my model ET8015C only has four terminal connections any suggestions
the ET 8000 series has a switch of voltage and a different diagram for each position. Look up on the intermatic website the manual for your specific model and install accordingly. 240 installations usually need two hots to provide 240 to any system, make sure you have it, and follow manufacturers instructions.
Hey there! We uploaded our weekly (soon to be daily) Highlights video today and you were in it! Congratulations! We hope you continue to grow and reach a wider audience! If you haven't already, consider subscribing to our channel to help us promote our users and stay up to date on our future highlights and changes. Thanks for using our website and keep marching!
I’m having an issue with a timer I just purchased, no matter what schedule is set to the load connected to terminal 4 stays on if the jumper is connected between 2 and 3. Is there a setting that would cause that switched connection to stay closed?
I have owned many of the Intermatic water heater timers(Tan WH-1 & Little Grey Box). I'm going to toss my WH-1 and get a digital. Tired of the syncho motor growling as it runs - real loud and is also telling me that it will soon not turn at all. Not sure why Intermatic does NOT supply the "jumper" wire or just build that in? Why wouldn't that be used?
I consulted with Drice Walker and he advised that the new intermatic 101 are fairly quiet, but the electronic is 100% quiet, you will only hear the relay turning the power on or off. Good luck on your change.
My timer shows nothing on the screen. I assume battery is dead. Do I need to switch off power from main before opening battery compartment and which and how many batteries do I need?
Open the battery compartment, this video shows how, and replace a single double A battery. You have a few seconds not to loose your prior pre-recorded settings... but if the battery has been dead for a long time, your memory has also been wiped out, you need to re-program. I hope this helps.
I knew someone would want to know it, but no one likes long videos! Perhaps we can make a video soon! But to solve your problem quickly, basically the switch to 240 is simple: Behind this unit, there is a jumper to switch voltages in between, 120, 208, 240 and 277... depending where you place the jumper. The board is marked on the back of the board (the actual timer guts). Then, after you changed your jumper to 240 you need to wire it to 240, with two lines, in 3 simple steps: First) Connect one line to the terminal 1 and another for terminal 2. Second) Then you use a jumper to connect terminal 1 and 5, and another jumper to connect 2 and 3. Third) Then you connect terminals 4 and 6 to your load... That simple!
😀 Hello There amazing person!! Recently we posted a new video with a mess made on the installation of a Timer Control. Check the link down below and leave your comments, hit that bell, and subscribe. See you in the next video. 🤗
Timer Control Installation made right - Easy Guide - th-cam.com/video/lK9hAWYhC04/w-d-xo.html
Out here in Hawaii, you just made my day. Brain is cooked from the heat and I know I was missing something. You just saved me a stack of time.
Thank you for Stop by our channel. We are glad that our video helped you solve your problem. Come back later, we will bring more videos related to this.
This helped me a lot. Thank you for the detailed content.
Thank YOU to be part of our audience. The next video is coming soon. Stay Tuned.
this video aloner helped me with another timer i bought. thanks so much for the clarity on how this was presented. thank you much !!!
Thank you - this is exactly the simple explanation I needed. REALLY APPRECIATE IT. Thank you.
We try to make it simple and easy, we are glad to be able to help.
yay! I see the progress! Very helpful to anyone who wants to install this model! Keep it up guys!
We Will !!! Thank you for all the support.
That was extremely helpful, worked perfectly once I put the jumper in
Thank you🙏
Very helpful. Thanks
Excellent explanation!
Glad it was helpful!
Thanks a lot this really helped out ,good job
Thank you 😊 man
You're welcome 😊
thanks you mr.
You got that Brazilian English accent 😂, good electricians. Nice video
Drice Walker is a Brazilian-born wacky character. This character was created to deliver messages online in the name of our sponsors: The Ultimate Pro and The Ultimate Handyman, but the accent is an original trait of the actor and owner of the companies aforementioned.
Very nice, exactly what i needed, i was blew fuses x 2, and finally found your video. So well presented, I understood your explanations of how this timer works. Really nice service to us all. Thank you, Diego
This is great and all but... I need to know about retaining walls, can you help???
Your wish has been granted! We will sponsor it.
Hey Garrett George , your wish just realized. Check our new video about Retaining Walls. Let us know your comments 👋 > th-cam.com/video/vZrlCyod-vE/w-d-xo.html
Is this the same wiring setup for a 220 volt system need a video for wiring setup for that.
I am wanting to switch my timer over to 240 as well I change the switch on the back but my model ET8015C only has four terminal connections any suggestions
the ET 8000 series has a switch of voltage and a different diagram for each position. Look up on the intermatic website the manual for your specific model and install accordingly. 240 installations usually need two hots to provide 240 to any system, make sure you have it, and follow manufacturers instructions.
🖖 Thanks for the answer Garrett
Garrett just gave the right answer Will. If you have more, please feel free to comment here.
Hey there! We uploaded our weekly (soon to be daily) Highlights video today and you were in it! Congratulations! We hope you continue to grow and reach a wider audience! If you haven't already, consider subscribing to our channel to help us promote our users and stay up to date on our future highlights and changes. Thanks for using our website and keep marching!
I’m having an issue with a timer I just purchased, no matter what schedule is set to the load connected to terminal 4 stays on if the jumper is connected between 2 and 3. Is there a setting that would cause that switched connection to stay closed?
Drice walker told us that there are many models of timers. If you give us the model number he can answer this question for you.
I’m trying to connect intermatic et2825c model. Is it going to be the same? Does it matter if it’s using a Hot Line vs Neutral Line into the switch??
I have owned many of the Intermatic water heater timers(Tan WH-1 & Little Grey Box). I'm going to toss my WH-1 and get a digital. Tired of the syncho motor growling as it runs - real loud and is also telling me that it will soon not turn at all. Not sure why Intermatic does NOT supply the "jumper" wire or just build that in? Why wouldn't that be used?
Good move dude
I consulted with Drice Walker and he advised that the new intermatic 101 are fairly quiet, but the electronic is 100% quiet, you will only hear the relay turning the power on or off. Good luck on your change.
My timer shows nothing on the screen. I assume battery is dead. Do I need to switch off power from main before opening battery compartment and which and how many batteries do I need?
Open the battery compartment, this video shows how, and replace a single double A battery. You have a few seconds not to loose your prior pre-recorded settings... but if the battery has been dead for a long time, your memory has also been wiped out, you need to re-program. I hope this helps.
Whats a pig's tail? And what's a hook?
So that's a 110 set up how do you wire it for 240
Hi @Thomas Fortier. This is a good question. Drice Walker will answer you directly in a few minutes. Thank you for been here on the channel.
I knew someone would want to know it, but no one likes long videos! Perhaps we can make a video soon!
But to solve your problem quickly, basically the switch to 240 is simple:
Behind this unit, there is a jumper to switch voltages in between, 120, 208, 240 and 277... depending where you place the jumper. The board is marked on the back of the board (the actual timer guts). Then, after you changed your jumper to 240 you need to wire it to 240, with two lines, in 3 simple steps:
First) Connect one line to the terminal 1 and another for terminal 2.
Second) Then you use a jumper to connect terminal 1 and 5, and another jumper to connect 2 and 3.
Third) Then you connect terminals 4 and 6 to your load... That simple!
😀👐
@@dricewalker1953
I am wanting to change mine to 240 v as well but only have 4 terminal screws any suggestions
@@willpruett2246 what is your model number? I will contact the manufacturer and see what you can do to upgrade.
the voice in competition with the music was distracting. the music is not apart of the instructions I would cancel the music.