I have the same stand. I've used it on a trailer bolted down as well. It worked flawlessly for 600 mile trip. I'm a new subscriber. I am happy to support a fellow moto content creator. Ride safe and all the best with the channel. 👊👍🇺🇸
Nice. I actually bought the same one about a year and a half ago for my 2020 EGS. I thought the stand rear brace was gonna hit the rear part of the fender when it the tire was moved into place, so I returned it and built my own. Glad it worked out for you.
I purchased two of these stands. I have one that is mounted to the floor in my barn and one I've made into a quick connect for my trailer. Very nice stands for the money.
I have 2021 Road King Special. I left it on the widest setting and it worked perfectly. Mine is mounted in a trailer and it’s pretty damn solid. I routinely make trips out to Texas and Nevada from San Diego. No issues. (With the use of ratchet straps ofcourse) Good Video Sir!
This stands work really well. I had a 4 bike trailer setup using them . Tanks for subbing to the channel. I did the same with from both of my channels. Good luck and keep the content coming. I'm definitely gonna keep watching.
Looks great. I've got a Harbor a few miles down the road so I may go check one of these out. I know how space is. I used to have a one car garage and I was actually able to get the Fat Bob and the F-150 in it! Always took me a long time to squeeze then in there. Thanks for sharing.
My initial concern was how far back it goes. I wanted to make sure one of those HD oil containers could still slide under. I suppose I could turn it sideways though. I'm looking to get one for doing maintenance on. Fluid changes Etc. Thanks for the video..
Is it hard to pull the motorcycle back out of the stand? It looks like you can power it in no problem, but when you have to use your legs to push back, how can you get the tire up over the back part of the chock?
I was debating on getting this exact one. Thanks for making and posting this video. You made my decision easier. Now I just have to find that coupon...🙄
Thanks, I actually bought it back in November. I have not had any issues with it at all. The stand holds the motorcycle very well even without using straps. I usually put in gear after I shut it down to prevent it from rolling back (just in case).
When I pull the bike off I first push forward then back, the bike will come back a little I apply the front brakes then pull back again releasing the brakes and the bike rolls off the choke. It's actually easier that it sounds.
I have the same stand. I've used it on a trailer bolted down as well. It worked flawlessly for 600 mile trip. I'm a new subscriber. I am happy to support a fellow moto content creator. Ride safe and all the best with the channel. 👊👍🇺🇸
Thanks for the demo. Nice and clear and good volume. 👌👌
Thanks
Nice. I actually bought the same one about a year and a half ago for my 2020 EGS. I thought the stand rear brace was gonna hit the rear part of the fender when it the tire was moved into place, so I returned it and built my own. Glad it worked out for you.
I purchased two of these stands. I have one that is mounted to the floor in my barn and one I've made into a quick connect for my trailer. Very nice stands for the money.
I have 2021 Road King Special. I left it on the widest setting and it worked perfectly. Mine is mounted in a trailer and it’s pretty damn solid. I routinely make trips out to Texas and Nevada from San Diego. No issues. (With the use of ratchet straps ofcourse) Good Video Sir!
This stands work really well. I had a 4 bike trailer setup using them . Tanks for subbing to the channel. I did the same with from both of my channels. Good luck and keep the content coming. I'm definitely gonna keep watching.
Looks great. I've got a Harbor a few miles down the road so I may go check one of these out. I know how space is. I used to have a one car garage and I was actually able to get the Fat Bob and the F-150 in it! Always took me a long time to squeeze then in there. Thanks for sharing.
Thanks. I used your design idea for the stand and mounting board along with some other ideas , original and borrowed 🙏😎
I got one 2 weeks ago it's a great stand, good stuff for my street bob.
My initial concern was how far back it goes. I wanted to make sure one of those HD oil containers could still slide under. I suppose I could turn it sideways though. I'm looking to get one for doing maintenance on. Fluid changes Etc. Thanks for the video..
I appreciate the video. I am looking for a stand in my garage also to make space for working and cleaning the bike.
Is it hard to pull the motorcycle back out of the stand? It looks like you can power it in no problem, but when you have to use your legs to push back, how can you get the tire up over the back part of the chock?
I saw a video where someone put a piece of 1/4 plywood where the front tire rests on the chock.
Also try putting the chock on the wider position.
How hard is it to remove the bike from the stand?
I was debating on getting this exact one. Thanks for making and posting this video. You made my decision easier. Now I just have to find that coupon...🙄
Thanks, been thinking about getting one myself.
Thanks,
I actually bought it back in November. I have not had any issues with it at all. The stand holds the motorcycle very well even without using straps. I usually put in gear after I shut it down to prevent it from rolling back (just in case).
Nicely done video. Off hand, do you recall tire size on bike in the video.
Thanks
Mike
130/80B17
You moved the taller part one hole forward. Was it a better fit?
Sounds like a great deal
I have a hard time getting my bike out of this chock. Have you had this issue?
Check out this video by What's up Bob, th-cam.com/video/6Xih5kAKYi0/w-d-xo.html&si=EnSIkaIECMiOmarE
When I pull the bike off I first push forward then back, the bike will come back a little I apply the front brakes then pull back again releasing the brakes and the bike rolls off the choke. It's actually easier that it sounds.