I want to add a Bass Clef stave to the first 4 measure intro of a song... so I have both treble and bass clef... after that, I only want the treble. Can't seem to find a way to do this. Is there a way to do it?
I wrote this question elsewhere as well : ) Question: Is there any way to make "one staff per page", or "Scroll in place"? What I'm trying to do is make a TH-cam tutorial video where the music goes along with what my chart is playing, but it doesn't scroll down the page (so that my student can practice along and still see the notes) and I'm just not sure how we do that. I see it all the time on other guys tutorials. thank you so much, Steve
Asked and answered ! Your trick #8 did it I actually doubled my 1st four bars, so that the whole thing will start on page two... and then I simply just grabbed phrase one (four bars) with the page break too you taught us and dragged down until the next line went to the following page. I did that over and over, screen recorded with Quick time and.... WE DID IT !!!! Thanks a million (notes and tips that is) !!!!!
Great video. After entering notes can you go back and change notes? Also, can I transpose and entire part? Say, I have written an entire part in key of C, but it needed to be in D, can the entire piece be changed?
Great video , very useful- specially halving and doubling. How can you prevent having a line with say only 2 bars from being stretched out to fill the whole line, the stretched out bars are harder to sight read. I want the 2 bars to end halfway across the page and for there to be a blank space for the rest of the line, I'd really appreciate your help!
I use "add9" often in jazz scores and I found blogs from long ago complaining about MuseScore not recognizing this term (or "adds" of other intervals). I've seen no blogs indicating that this capability was added. Is there any word on this? I don't see any references to "add" or other more exotic chord notations having been added to MuseScore's catalog of recognized chord forms (on the "Chord Symbols" page). Thanks.
Im working with muse score on a 2016 mac air My bluetooth headphones work for other apps, but musescore will not send its audio to my bluetooth. Any ideas? Great Video Excellent tips. I knew a few but didn't know a lot of them. Thanks!
Select the duration that the three notes will fill (e.g, a quarter note if you want a triplet of eighth notes). Go to the "add" menu, and choose "tuplets" and then "triplet" (or just press Ctrl+3). The one note will be replaced with three rests under a triplet, and then you can insert the notes you want.
There is a Percentage tool that shows up on the bottom right side of my scores it enables mto toggle down and choose different sizes 100% up to 400% .This changes the size of my score accordingly. Now when I select my score from the home page this selection no longer appears. How do I get it back? Thank you in advance!/
Hello, i have a question. I watched your video about how to convert sheet music to Tabs. I followed your instructions and was able to load a pdf file and received that special file in MSCZ Format. I loaded that file to musescore software. Then, i tried to get to the instrument for guitar by clicking on Edit, but i did find the Instrument option Can you help me to solve the problem? Thank you.
Thanks, teacher. Excellent video. I make my scores with all the bars numbered. I would like to make this number bigger and bolder. It can? Thanks for your attention.
Im using mac mini 2020 and 3.6 musescore. This just happen recently don't know how to fix it. I have a score up I click a note or rest inside a measure. I press cmd + T for system text Im typing in a note such as 7th position Its not recognizing my mac keyboard when I type 7th and space bar is where it does not recognize it I can not space my words in system text. Is there a solution
How do you move specific notes or bigger parts of the music? For example if you have a quarter rest and a quarter note, how do you then swap them around? Pls help, i really need to know this.
This might not be the best way to swap passages, but you can use Ctrl+Shift+X as a sort of combined paste and cut. Pretty much, when you use that shortcut, you cut the area selected, while placing down whatever you copied beforehand.
Thankyou so much ! How do you make rests part of a beamed group.I see this all the time in contemporary scores. And pitches in separate staves beaming in one ? Thankyou .
My problem is that when I start with pre notes, it doesn't add up in the end. For example, the music is in 4/4, but it starts with two quater notes, it has to calculate that in the end, but it just shows a full 4/4 measure in the end.
When I import a pdf of guitar sheet music I only seem to be able produce a blank TAB completely empty of normal TAB notation. Can you tell me where I am going wrong, please?
When you use rhythm, 14/4 or 10/8 for example. The shape of the musical notes seems divided in an unnatural way, all of them are connected to each other and are difficult to read. Is there a way to separate them from each other so that they look normal? Thanks
I just got this tonight and it won’t let me change the key signature, when I try to drag a new one over from the palette I get a 🚫over the key signature and it does nothing, what am I doing wrong?
I can't find anything for lute or oud expressions in the mixer, also some authentic Arab iand Chinese nstruments are not there (zither, around etc.) Thank you
Thanks for the great tips! (I already use a few). My scores are really large, and I need a second screen (monitor). I am using a new Mac. How do I connect the second screen so I can keep my palettes separate? Thanks,
It's called a longa, and you can add it to the toolbar using the "customize toolbar" option. You can also create it using the W shortcut mentioned in this video. The time signature need to be at least 16/4 or the equivalent for it to work though, otherwise you will get tied notes across multiple bars.
I'm having troubles adding fermata. When I click on the fermata symbol, I get something that does not look like a fermata. Why is this happening? Please help!
Thank you for your question. I am not sure why the fermata is not working for you. What kind of symbol is it inserting instead? Were you able to fix it?
How do you notate a note that needs to be held throughout an arpeggio while still being part of the arpeggio. For example, 4 beamed eighth notes with the first of those eighth notes having a hollow note head to tell the performer to hold that first of the eighth notes throughout the duration of the following eighth notes (as though it were a half note, but using an eighth note beam and a hollowed half note head). An example is in Chopin's Piano Sonata no.3, the Largo movement, specifically the second theme in E major. He used a grouping of 6 eighth notes beamed together, but with the first note of that eighth note beamed grouping having a half note note-head. Anyone? Thanks a ton.
It's not exactly clear what you want, but I guess you would put the longer note in the second voice. In the Chopin excerpt the stems of the lower notes point downwards, that means they're in the second voice
1st staff I have the rhythm guitar second staff I have the lead guitar how do I switch those around so the lead guitar is the top staff. I'm using the newest version 3.6.2
Thank you for the question. It sounds like using separate Voices for each note in your chord (or group of notes). You can find the voices near the top, you will see a 1,2,3,4. Each number is the voice part you are working on. It can take some time to get used to, and you might need to hide rests, but it might work for you. You may also need to change beam directions depending on what you want the music to look like. Let me know if this works for you. Thank you again!
Hi! Thank you for helpful tutorials! If you wan't a musician to change from let's say flute to piccolo, how can that be done? I wan't to be able to right "muta in piccolo" in my score and when I do so the sound of a piccolo will appear (or something similar). Of course one can always add an other staff for the piccolo, but since one musician will play both the instruments, it would be more convinient if I could use only one staff. I would really appreciate an answer!
You can use 'Change Instruments' in the palettes. Just click the note/bar that you want to change the instrument, then double click change instruments in the palettes, a window will pop out and ask the instrument that you want to change. This will also change the flute sound into piccolo as well. Hope this helps
Let's say you're working on a piece that has voice and piano, and you have an intro on the piano but nothing on the voice. How do you make multiple staves invisible instead of having to go one by one?
You can use the shortcut 'V' to toggle between visible and invisible elements.
Thank you so much 😀
I want to add a Bass Clef stave to the first 4 measure intro of a song... so I have both treble and bass clef... after that, I only want the treble. Can't seem to find a way to do this. Is there a way to do it?
Musescore is user-friendly. Sibelius and Finale, thank you very much 😃
I wrote this question elsewhere as well : )
Question: Is there any way to make "one staff per page", or "Scroll in place"?
What I'm trying to do is make a TH-cam tutorial video where the music goes along with what my chart is playing, but it doesn't scroll down the page (so that my student can practice along and still see the notes) and I'm just not sure how we do that. I see it all the time on other guys tutorials.
thank you so much,
Steve
Asked and answered ! Your trick #8 did it
I actually doubled my 1st four bars, so that the whole thing will start on page two... and then I simply just grabbed phrase one (four bars) with the page break too you taught us and dragged down until the next line went to the following page. I did that over and over, screen recorded with Quick time and.... WE DID IT !!!! Thanks a million (notes and tips that is) !!!!!
Thanx so much , this is so helpful
Great video. After entering notes can you go back and change notes?
Also, can I transpose and entire part? Say, I have written an entire part in key of C, but it needed to be in D, can the entire piece be changed?
Yes, you can! in Menu bar: Tools > Transpose
Amazing!🤩
Great video , very useful- specially halving and doubling.
How can you prevent having a line with say only 2 bars from being stretched out to fill the whole line, the stretched out bars are harder to sight read. I want the 2 bars to end halfway across the page and for there to be a blank space for the rest of the line, I'd really appreciate your help!
Thank you very much for this entire series. I've just started using Musescore and this is really helpfult o me.
I use "add9" often in jazz scores and I found blogs from long ago complaining about MuseScore not recognizing this term (or "adds" of other intervals). I've seen no blogs indicating that this capability was added. Is there any word on this? I don't see any references to "add" or other more exotic chord notations having been added to MuseScore's catalog of recognized chord forms (on the "Chord Symbols" page). Thanks.
Wow. More of this please!! Great.
Dear Sir please give a advise how can I connect midi keyboard?
Im working with muse score on a 2016 mac air My bluetooth headphones work for other apps, but musescore will not send its audio to my bluetooth. Any ideas?
Great Video Excellent tips. I knew a few but didn't know a lot of them. Thanks!
How can I add a key signature on a bass clef? When I try from the palette only get a treble location type
Is there an encircled R (copyright symbol) available to put in front of name at bottom center of music page?
Hello,can You say how use filters in musescore to allocate votes
Again, very helpful!
Great tutorial hope I download the right or latest MuseScore but struggling even to make a piano Treble Clef & Bass clef score
how to mute part (s) or maybe just couple of measures... ex. SATB and I want to mute the "tenor part" temporarily
This music sheet can convet like C,D,F,F,G,A,B NOTE SHEET..?
Help. The one common note command that is not anywhere is not stated. How do you add the 3 over 3 fast notes? Slightly changes the timing.
Select the duration that the three notes will fill (e.g, a quarter note if you want a triplet of eighth notes). Go to the "add" menu, and choose "tuplets" and then "triplet" (or just press Ctrl+3). The one note will be replaced with three rests under a triplet, and then you can insert the notes you want.
I have a midi score with Sax 1, 2 and 3 as separate parts. How can I combine them on to one staff?
Select all three staffs and use the "implode" command from the tools menu.
There is a Percentage tool that shows up on the bottom right side of my scores it enables mto toggle down and choose different sizes 100% up to 400% .This changes the size of my score accordingly. Now when I select my score from the home page this selection no longer appears. How do I get it back? Thank you in advance!/
Also I'd like to be able to have two staves - both treble for sop and also but cant find the option.
Is there a shortcut for dotted notes?
how do i control the decibels level in audacity with out switch changing the frequency or the volume when change to the decibel view?
Very helpful. How can you: 1. Add the name of the instrument to the left of the staff, and 2. Add more space between the grand staffs?
Hello, i have a question.
I watched your video about how to convert sheet music to Tabs. I followed your instructions and was able to load a pdf file and received that special file in MSCZ Format. I loaded that file to musescore software. Then, i tried to get to the instrument for guitar by clicking on Edit, but i did find the Instrument option
Can you help me to solve the problem?
Thank you.
Thanks, teacher. Excellent video. I make my scores with all the bars numbered. I would like to make this number bigger and bolder. It can? Thanks for your attention.
using it as a brass band with many instruments, how do you temporarily turn off an instrument from the playback, your help would be appreciated
How can I make things loud or quiet
I am puzzled by #5. Now that you selected the note heads or just the stems what do you do with it?
me too, how do you edit the selection en mass
Great stuff !!! Thanks !!!
Im using mac mini 2020 and 3.6 musescore. This just happen recently don't know how to fix it. I have a score up I click a note or rest inside a measure. I press cmd + T for system text Im typing in a note such as 7th position Its not recognizing my mac keyboard when I type 7th and space bar is where it does not recognize it I can not space my words in system text. Is there a solution
wow wow wow !!! So cool thanx a million!!!
How do you move specific notes or bigger parts of the music? For example if you have a quarter rest and a quarter note, how do you then swap them around?
Pls help, i really need to know this.
This might not be the best way to swap passages, but you can use Ctrl+Shift+X as a sort of combined paste and cut. Pretty much, when you use that shortcut, you cut the area selected, while placing down whatever you copied beforehand.
very helpful, thanks man!
How to add many grand staves?
Thankyou so much ! How do you make rests part of a beamed group.I see this all the time in contemporary scores. And pitches in separate staves beaming in one ? Thankyou .
My problem is that when I start with pre notes, it doesn't add up in the end. For example, the music is in 4/4, but it starts with two quater notes, it has to calculate that in the end, but it just shows a full 4/4 measure in the end.
How do I import a score from the internet..such as session
hello sir, how can i put note name inside the note head? thank you for answering
When I import a pdf of guitar sheet music I only seem to be able produce a blank TAB completely empty of normal TAB notation. Can you tell me where I am going wrong, please?
Hello! How can I put the lyrics at the bottom of the great staff. I don't want it between the G-Clef and Bass Clef.
When you use rhythm, 14/4 or 10/8 for example. The shape of the musical notes seems divided in an unnatural way, all of them are connected to each other and are difficult to read. Is there a way to separate them from each other so that they look normal? Thanks
Thanks-very helpful!
It is possible to have standard notation in the staff and on top of the staff rhythm notation for the chords at the same time?
How i can writh note in pen surface 8???🤔
I just got this tonight and it won’t let me change the key signature, when I try to drag a new one over from the palette I get a 🚫over the key signature and it does nothing, what am I doing wrong?
You have to persevere and keep hovering around the bar till a + sign appears . . hope this helps.
Thank You Sir 🙏🎼🔥
I can't find anything for lute or oud expressions in the mixer, also some authentic Arab iand Chinese nstruments are not there (zither, around etc.)
Thank you
great tutorial man! I was wondering, in this program, can you put boxes around measure numbers?
Thanks for the great tips! (I already use a few). My scores are really large, and I need a second screen (monitor). I am using a new Mac. How do I connect the second screen so I can keep my palettes separate? Thanks,
Buy cables.
Thank you very much i learnt somthing very good
How do I make the notehead size of voice 2 smaller than voice 1?
Hello guys, can someone tell how to put double breve note in musescore? thank you
It's called a longa, and you can add it to the toolbar using the "customize toolbar" option. You can also create it using the W shortcut mentioned in this video. The time signature need to be at least 16/4 or the equivalent for it to work though, otherwise you will get tied notes across multiple bars.
Is there a way to rewind? I hate going through the entire piece every single time
thakx very much)
I'm having troubles adding fermata. When I click on the fermata symbol, I get something that does not look like a fermata. Why is this happening? Please help!
Thank you for your question. I am not sure why the fermata is not working for you. What kind of symbol is it inserting instead? Were you able to fix it?
How do you notate a note that needs to be held throughout an arpeggio while still being part of the arpeggio. For example, 4 beamed eighth notes with the first of those eighth notes having a hollow note head to tell the performer to hold that first of the eighth notes throughout the duration of the following eighth notes (as though it were a half note, but using an eighth note beam and a hollowed half note head). An example is in Chopin's Piano Sonata no.3, the Largo movement, specifically the second theme in E major. He used a grouping of 6 eighth notes beamed together, but with the first note of that eighth note beamed grouping having a half note note-head. Anyone? Thanks a ton.
It's not exactly clear what you want, but I guess you would put the longer note in the second voice. In the Chopin excerpt the stems of the lower notes point downwards, that means they're in the second voice
1st staff I have the rhythm guitar second staff I have the lead guitar how do I switch those around so the lead guitar is the top staff. I'm using the newest version 3.6.2
I think you can go to instruments (press I on your keyboard) then select one of the instruments and then move up or down to get the order you like.
Can't figure out how to put a half note in with a dotted quarter note under it which would then drop to an eighth note!
Thank you for the question. It sounds like using separate Voices for each note in your chord (or group of notes). You can find the voices near the top, you will see a 1,2,3,4. Each number is the voice part you are working on. It can take some time to get used to, and you might need to hide rests, but it might work for you. You may also need to change beam directions depending on what you want the music to look like. Let me know if this works for you. Thank you again!
thx sooooooo much
I didn't get #5 at all and I didn't see any difference in the note heads or stems. And why would someone want to hide something in the score (#6)?
Hi! Thank you for helpful tutorials! If you wan't a musician to change from let's say flute to piccolo, how can that be done? I wan't to be able to right "muta in piccolo" in my score and when I do so the sound of a piccolo will appear (or something similar). Of course one can always add an other staff for the piccolo, but since one musician will play both the instruments, it would be more convinient if I could use only one staff. I would really appreciate an answer!
You can use 'Change Instruments' in the palettes. Just click the note/bar that you want to change the instrument, then double click change instruments in the palettes, a window will pop out and ask the instrument that you want to change. This will also change the flute sound into piccolo as well. Hope this helps
Thanks
Let's say you're working on a piece that has voice and piano, and you have an intro on the piano but nothing on the voice. How do you make multiple staves invisible instead of having to go one by one?
nice video
Wheres the double kress?
For no 7. You could just also use the avanced palette. That's what i did anyway
Shortcut for #6, just press V and it will make it invisible!
DOTTED NOTES!