The diode setting on the multimeter is selected to determine the working characteristics of the International Rectifier Field Effect Transistor. Forward and reverse bias reading is taken.
Good morning Sir, All type of electronic spares and devices good (or) fault, faulty, testing method showly Sir. Conduct and non conduct spares testing video's one by one upload pl. Thanking You.
NO. The Mosfet depicted in the schematic at the end is a p-channel. N-channel Mosfet needs something like this, just connect a switch between VDD and Vin; Rin and Rgs between 1.5k...2.2k; the lamp may be replaced with and LED in series with 1k resistor; VDD 7.5...12V: www.google.com.mx/search?q=mosfet+as+a+switch&prmd=ivn&sxsrf=ALeKk02HCSCEqFs1iMJn9L5PXZRLynfcuQ:1594598728848&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjDnaqW98jqAhUEa80KHbKpDKIQ_AUoAXoECA4QAQ#imgrc=7w36YAhOGDUEFM&imgdii=iFo-RHuxjItAJM
The diode setting on the multimeter is selected to determine the working characteristics of the International Rectifier Field Effect Transistor. Forward and reverse bias reading is taken.
Does this test p channel and n channel mosfet in on and off state?
Nice...
I also learned more about the use of a mosfet from this video...
Merci pour l' idée !
Great, I don't know if the case of brownout MOSFET we may have a short circuit, but if yes, we'll have shorted battery.
A BOM (Build Of Material) and Schematic would be very helpful for us to replicate this.
Otherwise - neat
There's a circuit diagram in the end sir
Pero sirve para canal n y p,es decir que si se pueden probar los dos tipos de mosfet.
N and P Chanel bothe are working sir or only N chanel cheking
Might use a better soldering iron with more flux, the solder joint looks like cold
Ok
Good morning Sir,
All type of electronic spares and devices good (or) fault, faulty, testing method showly Sir.
Conduct and non conduct spares testing video's one by one upload pl.
Thanking You.
Ok
Kya yeah midget tester 100 percent jam karta hai ya nahi
Same tester can be use for N ch and P ch MOSFETs....?
Can it check N-Channel MOSFET?
Yes
NO. The Mosfet depicted in the schematic at the end is a p-channel.
N-channel Mosfet needs something like this, just connect a switch between VDD and Vin; Rin and Rgs between 1.5k...2.2k; the lamp may be replaced with and LED in series with 1k resistor; VDD 7.5...12V:
www.google.com.mx/search?q=mosfet+as+a+switch&prmd=ivn&sxsrf=ALeKk02HCSCEqFs1iMJn9L5PXZRLynfcuQ:1594598728848&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjDnaqW98jqAhUEa80KHbKpDKIQ_AUoAXoECA4QAQ#imgrc=7w36YAhOGDUEFM&imgdii=iFo-RHuxjItAJM
Please share a video using MOSFET (P & N both) as a switch.
Thanks.
Welcome!
Please share circuit diagram
Probably better to use a 4.7k or 5.1k resistor in place of the 1k resistor
Can we check all types of mosfet???
Resisters in pic are wrong (color code)
This only works for p-channel MOSFETs.
it can only test N-type mosfets
bhai is se sirf mosfet hi check hoga
Sensillo pero importante
Very nice.
Excelente
thanks
Just watched second video
And subscribe it good channel...
Sir can we use any MOSFET
N channel only.
@@wmonte75 l
Not working
Ok
displaying too fast video only-- making video for commercial purpose-Dislike
ki sara transistor
Nyc
😍😍😍
Sơ đồ ad ơi
@@easytechzones sơ đồ mạch, để làm cái ad
Dislike time pass