I just bought the F19 and was found the instructions a bit confusing especially the volume. You exactly explained it all perfectly. I’ll probably watch four or five to make sure I’ve got. I’m excited about this machine and hope I find some nice relics with it. Thank you for this excellent tutorial.
HI,i have the G2+(f19),the fetone is great,set vol at 10(no iron) then just set my v break at low tone 40(greyzone)then from48(blackzone on v break)up hightone.your hightrash set up works a treat.so thanks for the video and knowledge.Dirtfishings tip on raising coil over a target is spot on,if numbers stay stable its good,if they drop right off its junk.Thanks to all you fisher+teknetics fans,who have taught me many tricks and of course to mowerdog who posts many honest videos,unlike many where their bias slips in consciously or unconsciously. GL HH ATB
The raising the coil trick does not work on all junk targets. Strangely it works well for me with lower freq Fisher machines but not with the F19 on bottle caps. Dave Johnson of First Texas has posted a few tricks in other forums for this very reason. The one that works for me on bottle caps is to not raise the coil but continue swinging the coil normally on the target but move it forward and when the heel of the coil passes on top of the target the numbers will instantly drop in a major way (typically 79 to iron range 30 or so on a new Coors Light bottle cap). On gold jewelry, nickels, silver, copper coins the ID will diminish slightly but just by a few numbers (less than 10 for me and typically 2 or 3) before it completely disappears.
Brilliant review man. This is the finest in depth video explanation of the set-up procedures of the F19/G2+ MD's respectively, that there is out there, in my opinion. Thank you so much.
Thank you! It is still the best platform First Texas has to offer and not many know about it. Also the Bounty Hunter Time Ranger Pro is exactly the same machine for cheap and nobody knows that either.
Thanks for the tutorial mowerdog. I waited for a good deal on an F19 and finally got one. I was attracted by the rock solid ID seen in many videos. As much as I like my F5, it definitely bounces less on most targets. So far I like it and can't wait to use it at the beach.
The F19 is even better when bought cheap!! It finds things so small that I've had to raise my disc to 44. I believe it when they say they can find nuggets. Dead accurate on Nickels and super deep too.
@@mowerdog Yup it's awesome I find the more expensive Fishers are just a variation of a theme, they don't necessarily anything hugely better, just a little more refined
Well done on making this video mate by far the best I've seen on the f19 I'm getting this detector to work my sites here in the uk by your video it will be a killer on small Roman and silver coins thanks for sharing 👍
The F19 will blow away the Garrett machines in stability (usually you can run it at full power). More accurate ID and more accurate depth. It's feather light too! I only wish it was waterproof.
@@mowerdog Thank you sir....The Garretts have some good qualities, and I fully intend to still use them, but, hey, let`s try something new....I am also gonna get a 5" inch coil....Have one for the Garretts and it really helps a lot in trash.
@@mowerdog I watch the NOT THURSDAY and STEALTH DIGGERS channels, and they use the 5" on their F-19s in the really trashy areas, and swear by em. It will be nice to compare them. I have been wanting to go use the damn thing but I banged up my hip real bad playing kickball with the neighbor kids...Not real mobile right now, lol
Great video. I just got a F19 Ltd...actually, won it :-) and am very excited by all that it can do. Your video really helped me understand more and I learned a lot. I know I'll be reviewing this video again (and again) to get it all stuck in my head. Many thanks
+celticmandoplayer The F19 is awesome machine. It's ID is the most accurate of all 1st Texas's detectors. It actually goes deep too. It is a nickel magnet #57/58 ID. Take care!
I don't think I could go back to my Gold Bug Pro now that I've gotten used to the extra features of the F19. Your G2 is a great machine just like it is though.....
Nice video I just upgraded my Gold Bug Pro mainly for the backlight but lots of other nice features like memory retention and notch width. I was testing some Zinc pennies old and new to try to find a good notch range today and found mine hit between 71-75 consistently, Im curious as to why yours hit higher.. They should have made the backlight a bit easier to access. i was out hunting last night and had to go find a street light just to turn the backlight on lol..
Great vid the best explanation I have seen, I have the GBP and I am struggling learning to eliminate foil and other unwanted signals. The v break and the grey vs black bars and the notch all that many many thanks
I also had trouble with ultra tiny foil and stuff you couldn't even see. I mean these machines are sensitive! I could run my machine at 100 sensitivity because it just ran so smooth. But it made it pick up the smallest pieces of crap while jewelry and coin hunting. So in that case I would run my power at 60 to 70 and still got good depth but it didn't hit all those tiny pieces of foil. If you were nugget hunting then running full power finding small nuggets is what you want. Coin hunting it is not. Give it a try...
I can definitely relate when you mention the machine picks up stuff you can't see. I don't know how many times I've gone to the beach, dug a hole and couldn't see the target in the sand. Even my pin pointer could not sniff out the target at times. It ended up being extremely small low conductive junk most of the time. I have found that changing coils will make a significant difference in the size of the targets that the F19 picks up. The bigger the coil, the less small foil one will pick up. The bigger coil is much less sensitive to very small, very low conductors. I have noticed this mainly between the 11 DD standard and the Detech Ultimate coil which are the two primary coils I use (at the beach). Thanks for the video.
Ditto the other comments. Learned a lot. Very informative, excellent, and instructive. Not long or boring. Have you tried the F19 for gold prospecting? Thanks
Just picked up a 75 LTD and love it, so far it has helped with the bronze coins over here in Japan, There is a real small flake bronze coin over here that I like to find and it looks like the 19 would be really great for the really small deep ones. I would be torn between the 19 and the AT gold. Have you tried both? Thanks again for showing the volume thing in detail"
Excellent video. First Texas should hire you to do their videos....If anyone is looking to buy one of these check with Kenny (mowerdog) he made me a good deal on mine.
I know it's long and boring. Thanks for staying awake through the whole thing.LOL. I don't think the manufacturers like to hire anyone that may ask questions!!!! That's why your not hired as a field tester too!!!!
We both feel the F19 is the best machine they now make. We have tried the 70 and 75 and the rock solid target ID and quite operation makes it a joy to run. But then we also like the G2 and Gold Bug Pro for those same reasons. But they just don't have the options the F19 has. Let me know if you want a new F19?
They do work but the numbers are off a bit. My buddy Bill had been using the little 3.5x6 football concentric and 10 inch elliptical concentric with good success on the F19 from the F70
There is no doubt I would choose the F19. You will give up some depth on dimes and up. But it's maybe an inch. The ID on the 70 and 75 jumps sometimes 20 to 30 points on deeper targets that the 19 hits correctly and solid. As far as mid upper targets and down to foil the f19 has the depth advantage with solid ID's. Plus the 19 runs super stable with high sensitivity while the 70, 75 and 75dst is still jittery when you crank them up. All mentioned are fine machines though. My pick - F19. Here's a tip. The F19 is supposed to be coming out in regular Fisher colors. When that happens and the new Teknetics G2+ (exact same guts as F19 but different handle) the F19 price is supposed to drop about $100. You may wait just a little to see if all this comes about?
+mowerdog i would really appreciate if you could do a video on gold and im sure there would be many people who would want to see it. There is no such video showing gold id using the F19
Your larger bullets will be hanging around in the 50 to 70's range. But small lead will hit a lot lower. If I was in a know bullet producing site I would set the disc to 30 and dig everything.
thank you sir you had very good information sir i have a question when i take f19 to a big vessel like aluminum quality and copper quality to the machine then the machine is not making sound what can be wrong 🙏 please help me.
Sir when i turn on the power and increase the can, after that i put the big object like aluminum utensil copper utensil on the machine then the machine is not making sound very little song that a
And when I put the detector on all metal mode, the detector easily catches large aluminum and copper utensils but when I turn off all metal mode, the detector runs on the left hand key If I turn on the machine then the machine does not catch the big metal aluminum and large copper utensils, then is there a problem in some setting or in the machine please tell me help me
It is a lot deeper than that on our low, med and med high conductors. It will hit our lead, pull tabs and even zinc cents deep. I see the depth drop off some on our high conductors. I have dug 9+ inch nickles and pull tabs. Probably the most stable and accurate target ID of all Fisher models. Well let me restate that - The G2, Gold bugs and F19's have the most accurate and stable target ID's of any Fisher or Tek I have used.(F70 and F75ltd included) It will correctly ID a nickel just at the depth of detection. Which is DEEP....
The notch window is on the F19 and G2+ not the GBP or G2. I had a GBP and loved it. But the F19 has the extra options shown in my vid. Both will find the same targets though. Just try running your power 50 to 75% of what you're running now to help eliminate the ultra tiny foil.
Sounds good mate deeper than my deus then it won't reach that deep you can join my detecting group if you want (dig this metal detecting group) on Facebook we could do with someone with your experience of the f19 on there
My hunting buddy had a Deus and said he liked the G2 and F19 better. He has a lot of experience as well. We are able to run maximum power at all of our sites without any EMI. These machines run quiet and stable.
I did not like the Racer. The ID was too jumpy and it was real coil heavy. The tones sucked for me too. The grip angle wasn't good either. The F19 has a much better solid target ID. Is not coil heavy. Is lighter weight. Has cheaper coils. I still believe the F19 and G2 are the best machines First Texas has come out with. I wish they were waterproof.
mowerdog thanks I just bought my first machine 3 weeks ago first a Garret ace 250 . Then I sent it back before using it . The x Terra 305 went on sale for 259$ has a manual ground balance and blows the Garret away and minelab gives Veterans and military 15% off so I ended up paying only 220$ . It’s a fun machine so far but I’m already starting to look at machines in the 500$ range . Thanks I haven’t really heard anything bad about the F19 and I already plan on getting an F pulse . After much research that seems to be the best pinpointer around .
I would pick the 305 over the F19 though. More options, tones, freq, more notch. I have owned three 305's. One of my all time favs. Got my eye on the ML Equinox. I'm waiting until the 1st run is sold out. May get one in a month or so. I do quite a bit of water hunting and need waterproof machines. Right now I have an etrac and atpro. I can do most all typed of hunting with those 2. But the smell of a fresh machine sounds good too! th-cam.com/video/XJpO094xSQ0/w-d-xo.html
Thank you so much. My F19 arrived today. I learn better by a tutor or video instruction. Your video is just what I needed. Blessings.
It's a jewelry and deep nickel killer too! Very accurate ID. Simple and powerful.
How did you like the f19?
I just bought the F19 and was found the instructions a bit confusing especially the volume. You exactly explained it all perfectly. I’ll probably watch four or five to make sure I’ve got. I’m excited about this machine and hope I find some nice relics with it. Thank you for this excellent tutorial.
It's the best machine first Texas offers
@@mowerdog I’ve also subscribed to your channel. Thank you.
HI,i have the G2+(f19),the fetone is great,set vol at 10(no iron) then just set my v break at low tone 40(greyzone)then from48(blackzone on v break)up hightone.your hightrash set up works a treat.so thanks for the video and knowledge.Dirtfishings tip on raising coil over a target is spot on,if numbers stay stable its good,if they drop right off its junk.Thanks to all you fisher+teknetics fans,who have taught me many tricks and of course to mowerdog who posts many honest videos,unlike many where their bias slips in consciously or unconsciously. GL HH ATB
The raising the coil trick does not work on all junk targets. Strangely it works well for me with lower freq Fisher machines but not with the F19 on bottle caps. Dave Johnson of First Texas has posted a few tricks in other forums for this very reason. The one that works for me on bottle caps is to not raise the coil but continue swinging the coil normally on the target but move it forward and when the heel of the coil passes on top of the target the numbers will instantly drop in a major way (typically 79 to iron range 30 or so on a new Coors Light bottle cap). On gold jewelry, nickels, silver, copper coins the ID will diminish slightly but just by a few numbers (less than 10 for me and typically 2 or 3) before it completely disappears.
Brilliant review man. This is the finest in depth video explanation of the set-up procedures of the F19/G2+ MD's respectively, that there is out there, in my opinion. Thank you so much.
Thanks for the kind words!! I still believe the f19 is fishers best machine.
@@mowerdog You are more than welcome man. Credit where credit is due. Thanks again from me, on the other side of the pond.
This is the best video online about setting up the F19/G2+ . I just got a G2+ and now I understand it! Thanks!!!
Thank you! It is still the best platform First Texas has to offer and not many know about it. Also the Bounty Hunter Time Ranger Pro is exactly the same machine for cheap and nobody knows that either.
Thank you :) i just bought one its my first so i have been trying to figure it out. Your video explained it very symply. Thanks
Glad it helped. Welcome to the hobby!
Very informative video! One of the best informative videos I've watched on the F19! Thanks
Morgan Riddle I appreciate that! Thanks for watching!
You have explained this machine better then any other on youtube. I would like to see how gold shows on this unit. Thank you
I sold it years ago. I wish I had it back. I'm looking for a used one now.
@@mowerdog Just bought a new one with 11 inch coil for 449.00 at modernmetaldetectors.com/
I just bought this relic detector,so far l love it..great instructions,on my Saxon site,when the snow goes..
Let us know what you find?
Thanks for the tutorial mowerdog. I waited for a good deal on an F19 and finally got one. I was attracted by the rock solid ID seen in many videos. As much as I like my F5, it definitely bounces less on most targets. So far I like it and can't wait to use it at the beach.
The F19 is even better when bought cheap!! It finds things so small that I've had to raise my disc to 44. I believe it when they say they can find nuggets. Dead accurate on Nickels and super deep too.
thanks for the video. i brought 2 of these. one for me and one for the wife. now i can hopefully set them up right :)
You still have them??
@@mowerdog yes I do, the best investment i ever made. fantastic metal detectors :)
Great Video mowerdog! Been wanting to hear the tones and have features explained! My next machine for sure!
They are good machines. Real stable and accurate ID numbers.
What a very informative well done video. Thank you.
Glad it was helpful!
Unbelievable video thanks so much, I now understand how to use my F19
Still a great machine
@@mowerdog Yup it's awesome I find the more expensive Fishers are just a variation of a theme, they don't necessarily anything hugely better, just a little more refined
I just bought a new f19 for $280.00 dollars i Think I got a good deal on it. It has the 11 inch DD coil
You stole it!
Well done on making this video mate by far the best I've seen on the f19 I'm getting this detector to work my sites here in the uk by your video it will be a killer on small Roman and silver coins thanks for sharing 👍
The F19's work were well. Good luck on those Roman's!!
I have one on the way, and this is a very good tutorial....I also have two Garretts. AT Gold and AT Max.
The F19 will blow away the Garrett machines in stability (usually you can run it at full power). More accurate ID and more accurate depth. It's feather light too! I only wish it was waterproof.
@@mowerdog Thank you sir....The Garretts have some good qualities, and I fully intend to still use them, but, hey, let`s try something new....I am also gonna get a 5" inch coil....Have one for the Garretts and it really helps a lot in trash.
@@scottpetrich1346 I found that the 5x9 coil is all you need.
@@mowerdog I watch the NOT THURSDAY and STEALTH DIGGERS channels, and they use the 5" on their F-19s in the really trashy areas, and swear by em. It will be nice to compare them. I have been wanting to go use the damn thing but I banged up my hip real bad playing kickball with the neighbor kids...Not real mobile right now, lol
That was a very good video, now I am going to have to buy a fisher f19. I liked your trashy park settings.
You just missed a like new one from Indian Nations for $299 shipped. Deals are out there. You must be ready to pounce....
I picked up the one that was listed just before ! Super super price for such an awesome machine.
Great!
Great video. I just got a F19 Ltd...actually, won it :-) and am very excited by all that it can do. Your video really helped me understand more and I learned a lot. I know I'll be reviewing this video again (and again) to get it all stuck in my head. Many thanks
+celticmandoplayer The F19 is awesome machine. It's ID is the most accurate of all 1st Texas's detectors. It actually goes deep too. It is a nickel magnet #57/58 ID. Take care!
+mowerdog Thanks ! Have you done any gold prospecting with yours? Any luck? What numbers would nuggets come in at? Thanks again :-)
I have not. There are a few vids posted hunting gold with the F19/Gold Bug Pro's. I do know it will find ultra small targets.
Thanks :-)
Keep up your videos. I really enjoy them and LEARN too !
Will do!
Thank you so much for this. Best yet I've found on explaining this rig to a new guy considering its purchase.
Thank you!
I wish I could flash that firmware onto my G2... I would love to have the notch feature....
Great video!
I don't think I could go back to my Gold Bug Pro now that I've gotten used to the extra features of the F19. Your G2 is a great machine just like it is though.....
Nice video I just upgraded my Gold Bug Pro mainly for the backlight but lots of other nice features like memory retention and notch width. I was testing some Zinc pennies old and new to try to find a good notch range today and found mine hit between 71-75 consistently, Im curious as to why yours hit higher.. They should have made the backlight a bit easier to access. i was out hunting last night and had to go find a street light just to turn the backlight on lol..
+S Sweat I upgraded as well from a GBP. The F19 may be the best Fisher machine currently made.
Great video thanks!!
My pleasure
Great vid the best explanation I have seen, I have the GBP and I am struggling learning to eliminate foil and other unwanted signals. The v break and the grey vs black bars and the notch all that many many thanks
I also had trouble with ultra tiny foil and stuff you couldn't even see. I mean these machines are sensitive! I could run my machine at 100 sensitivity because it just ran so smooth. But it made it pick up the smallest pieces of crap while jewelry and coin hunting. So in that case I would run my power at 60 to 70 and still got good depth but it didn't hit all those tiny pieces of foil. If you were nugget hunting then running full power finding small nuggets is what you want. Coin hunting it is not. Give it a try...
I can definitely relate when you mention the machine picks up stuff you can't see. I don't know how many times I've gone to the beach, dug a hole and couldn't see the target in the sand. Even my pin pointer could not sniff out the target at times. It ended up being extremely small low conductive junk most of the time. I have found that changing coils will make a significant difference in the size of the targets that the F19 picks up. The bigger the coil, the less small foil one will pick up. The bigger coil is much less sensitive to very small, very low conductors. I have noticed this mainly between the 11 DD standard and the Detech Ultimate coil which are the two primary coils I use (at the beach). Thanks for the video.
There is no doubt a F19 will find tiny nuggets.
Ditto the other comments. Learned a lot. Very informative, excellent, and instructive. Not long or boring. Have you tried the F19 for gold prospecting? Thanks
+Bruce Custer I have not prospected with it but I'm positive it will do fine. It's a super machine.
Excellent tutorial..
Thank you
Just picked up a 75 LTD and love it, so far it has helped with the bronze coins over here in Japan, There is a real small flake bronze coin over here that I like to find and it looks like the 19 would be really great for the really small deep ones.
I would be torn between the 19 and the AT gold. Have you tried both? Thanks again for showing the volume thing in detail"
The only thing the Garrett has over the f19 is a waterproof housing. Other than that the f19 smokes the AT
Excellent video. First Texas should hire you to do their videos....If anyone is looking to buy one of these check with Kenny (mowerdog) he made me a good deal on mine.
I know it's long and boring. Thanks for staying awake through the whole thing.LOL. I don't think the manufacturers like to hire anyone that may ask questions!!!! That's why your not hired as a field tester too!!!!
New sub! Great video explaining the F19! Well done brother 👍💯🍀
Thank you very much!
Great video.Between you and dirtfishing ya;ll are gonna make me try one.!!!lol
We both feel the F19 is the best machine they now make. We have tried the 70 and 75 and the rock solid target ID and quite operation makes it a joy to run. But then we also like the G2 and Gold Bug Pro for those same reasons. But they just don't have the options the F19 has. Let me know if you want a new F19?
mowerdog Thanks.
mowerdog Just wondering if the coils from the F75 will work on the F19?
They do work but the numbers are off a bit. My buddy Bill had been using the little 3.5x6 football concentric and 10 inch elliptical concentric with good success on the F19 from the F70
mowerdog Thanks.
well done great display young man
Thanks GR! The F19 is really a super machine. I like it better than the F70 and F75. Rock solid ID numbers at depth.
Fantastic video much better than yellow or red ones .is it any good on wet sand do u know many thanks 4 sharing.
I never had it on wet salt sand. But there are vids showing good results.
Great stuff. thinking about getting a f19 or the f75 se what do you think
There is no doubt I would choose the F19. You will give up some depth on dimes and up. But it's maybe an inch. The ID on the 70 and 75 jumps sometimes 20 to 30 points on deeper targets that the 19 hits correctly and solid. As far as mid upper targets and down to foil the f19 has the depth advantage with solid ID's. Plus the 19 runs super stable with high sensitivity while the 70, 75 and 75dst is still jittery when you crank them up. All mentioned are fine machines though. My pick - F19. Here's a tip. The F19 is supposed to be coming out in regular Fisher colors. When that happens and the new Teknetics G2+ (exact same guts as F19 but different handle) the F19 price is supposed to drop about $100. You may wait just a little to see if all this comes about?
Any ideas on the target IDs for Various gold carets & other precious metals, ie silver & platinum please? Thank you.
+UKHistoryHunter Gold can be 35 to 70. Silver from 70's on up. Platinum I believe would be down around 35 to 50. Jewelry is tough it zero in on.
+mowerdog i would really appreciate if you could do a video on gold and im sure there would be many people who would want to see it. There is no such video showing gold id using the F19
what about lead bullets? what would you set that for?
Your larger bullets will be hanging around in the 50 to 70's range. But small lead will hit a lot lower. If I was in a know bullet producing site I would set the disc to 30 and dig everything.
thank you sir you had very good information sir i have a question when i take f19 to a big vessel like aluminum quality and copper quality to the machine then the machine is not making sound what can be wrong 🙏 please help me.
It sounds like it needs service.
The F19 is still the best machine Fisher has.
Sir when i turn on the power and increase the can, after that i put the big object like aluminum utensil copper utensil on the machine then the machine is not making sound very little song that a
And when I put the detector on all metal mode, the detector easily catches large aluminum and copper utensils but when I turn off all metal mode, the detector runs on the left hand key If I turn on the machine then the machine does not catch the big metal aluminum and large copper utensils, then is there a problem in some setting or in the machine please tell me help me
What's the depth like mate is it a solid 7inch unite
It is a lot deeper than that on our low, med and med high conductors. It will hit our lead, pull tabs and even zinc cents deep. I see the depth drop off some on our high conductors. I have dug 9+ inch nickles and pull tabs. Probably the most stable and accurate target ID of all Fisher models. Well let me restate that - The G2, Gold bugs and F19's have the most accurate and stable target ID's of any Fisher or Tek I have used.(F70 and F75ltd included) It will correctly ID a nickel just at the depth of detection. Which is DEEP....
20:26 what coil size did you use for this video. Stock coil or open coil.
5x10 football coil.
oops or brass too?
Brass is a high conductor. You could figure high 70's on up.
A closer look at my GBP I don't see how to move the notch up or down the scale of black bars just my luck
The notch window is on the F19 and G2+ not the GBP or G2. I had a GBP
and loved it. But the F19 has the extra options shown in my vid. Both
will find the same targets though. Just try running your power 50 to
75% of what you're running now to help eliminate the ultra tiny foil.
Thanks again is there a forum you visit
Treasure Classifieds.com, Dankowski, friendly, detectorprospector to name a few
Sounds good mate deeper than my deus then it won't reach that deep you can join my detecting group if you want (dig this metal detecting group) on Facebook we could do with someone with your experience of the f19 on there
My hunting buddy had a Deus and said he liked the G2 and F19 better. He has a lot of experience as well. We are able to run maximum power at all of our sites without any EMI. These machines run quiet and stable.
What is better this or the Makro racer?
I did not like the Racer. The ID was too jumpy and it was real coil heavy. The tones sucked for me too. The grip angle wasn't good either. The F19 has a much better solid target ID. Is not coil heavy. Is lighter weight. Has cheaper coils. I still believe the F19 and G2 are the best machines First Texas has come out with. I wish they were waterproof.
mowerdog thanks I just bought my first machine 3 weeks ago first a Garret ace 250 . Then I sent it back before using it . The x Terra 305 went on sale for 259$ has a manual ground balance and blows the Garret away and minelab gives Veterans and military 15% off so I ended up paying only 220$ . It’s a fun machine so far but I’m already starting to look at machines in the 500$ range . Thanks I haven’t really heard anything bad about the F19 and I already plan on getting an F pulse . After much research that seems to be the best pinpointer around .
I would pick the 305 over the F19 though. More options, tones, freq, more notch. I have owned three 305's. One of my all time favs. Got my eye on the ML Equinox. I'm waiting until the 1st run is sold out. May get one in a month or so. I do quite a bit of water hunting and need waterproof machines. Right now I have an etrac and atpro. I can do most all typed of hunting with those 2. But the smell of a fresh machine sounds good too! th-cam.com/video/XJpO094xSQ0/w-d-xo.html
th-cam.com/video/XJpO094xSQ0/w-d-xo.html
mowerdog if I could afford an etrac I’d definitely get one . Maybe I’ll look into a used Safari .
Greetings, Monsieur, how deep is Fishhar 19?
Around 10 inches on a us nickel in the ground.
The Time Ranger Pro is exactly the same as the F19 for a lot less money.
Good evening sir, does Fishhar have 3 meters in the ground?