initially i thought sirji's only focus to keep the white board clean but the information shared later was worth waiting for. Good work, please make the next one.
Sir plz welding ka drawing kse padhta ha uspa video bnae...kse structure ya fir pipe line ka drawing ma welding symbol ka use dekhaya...MATLAB practical video bnae...
crispy clear, i was searching for a perfect video, and finally got it. Thanks a lot sir, love u sir. I have a suggestion (feedback) and request for you sir. 1)suggession: please use a collar mic , it will save your energy as well as audio will be more clear. 2) request : please clear why have you not considered root face as in our vessel drawing everywhere we use root face of 2 mm
What if the elementary symbol is below the reference line and the dashed line is above the reference line, then the weld is on the arrow side or on the other side?
At 18 mins, the symbol drawn is wrong. As the welding is happening on other side,thus the symbol for weld should be down of the reference line. Isn't it. Please clear if I'm wrong. Thanks
![[Hindi] How to write a Welding Procedure Specification (WPS)](http://i.ytimg.com/vi/tRGeQdhx1Fc/mqdefault.jpg)
![[Hindi] How to write a Welding Procedure Specification (WPS)](/img/tr.png)
![[English] ISO standards for welding](/img/n.gif)
I'm a fresher Welding Inspector sir, i had confusion about Symbols. But you have explained in such a simple way. Thank you ❤
Thank you. Please join my channel to support my initiative. Joining link: th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
I am Abdul Kalam BE MECHANICAL IN 1993, I HAVE SEEN YOUE ALL VIDEOS, God bless you my dear you explained excellent.
Thank you. Please join my channel to support my initiative. Joining Link: th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
I am from tamilnadu working in saudi arabia, but i can understand your lecture in hindhi also good keepit up sir
Thank you so much
One of the best technical channel on you tube for welding and ndt we always study from this channel
You are great sir
Thank you. Please visit my website www.weldingandndt.com/
initially i thought sirji's only focus to keep the white board clean but the information shared later was worth waiting for. Good work, please make the next one.
Ha ha ha. Thanks. Please visit my website www.weldingandndt.com
Thanksfull sir Aap ke is video se hum logo ko ek experience confidence milta hai
hats off great explanation, maan gaya sir ji
Thank you. Please join my channel to support me. Joining link: th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
very simple and easy .
outstanding sir stay blessed with lots of happiness
Thank you. Please join my channel to support my initiative: th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Dil se bhot acha laga yee lecture
Thank you. Please visit my website www.weldingandndt.com/
Super explanation welding symbol❤
Thank you. Please join my channel to support my initiative. Joining link: th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Nice video sir l am waiting next video
Thank you. Please join my channel to support my initiative. Joining link:
th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Well done sir
Very helpful many many thanks for improving our technical knowledge.
Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/
Thank you sir for this knowledge.
Thank you. Please join my channel. Joining Link: th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Rich information
Sir itna acha to iti ke teacher bhi nahi batate .veri good sir
Thank you. Please join my channel to support my initiative. Joining Link:th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Great sir MashaAllah🔥
Thank you. Please join my channel to support my initiative. Joining Link: th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Thank you so much sir, wonderful
Thank you. Please join my channel. Joining Link: th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Hello from Houston Texas- I don't speak Urdu but I got the info ..
Thank you so much
Very nice sir
very nice sir mai v chahata agal vdo aaye
Thank you. Please join my channel to watch all the videos. Joining Link: th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Advanced welding pe video banaye sir ...bahut acha sikhane ko mil rha hai..
Good sir
Thank you. Please join my channel to support my initiative. Joining link:
th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Zabardast laga sir ,thank u
Love you sir...I always wait Ur upcoming video
best job sir
Thank you. Please join my channel to support my initiative. Joining link: th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Sir it is very good. Easy to understand. Please make 2nd part .. Soon..
Sure. Please visit my website www.weldingandndt.com
बहुत सही sir
I am trying to watch your video during this quarantine period, really helpful
Thank you. Please visit my website www.weldingandndt.com/
Plz make next video I m waiting for next part of this video which is really very helpful sir
Excellent teaching. Thanks mate
Thank you. Please join my channel to support me. Joining Link: th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Hai Bro thankyou for provided good videos till now.
Thanks. Please visit my website weldingandndt.com
You are good teachers to us , thanks sir
Thank you. Please join my channel to support my initiative. Joining Link:th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Superb sir.. Amazing teaching skills😍
Thank you. Please visit my website www.weldingandndt.com/
Very Useful 👍
Thank you. Please visit my website www.weldingandndt.com/
Very well explained sir, thank you
Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/
Your video is very helpful pls make the next part of it,thank u sir
Nice explain
Thanks. Please visit my website weldingandndt.com
Very clear and understandable lecture.
Thank you.
Thank you. Please visit my website www.weldingandndt.com/
very nice video
Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/
👍👍👍.. Carry on
Thanks. Please visit my website www.weldingandndt.com
Very helpful
Nice sir ji next part banao
Thanks. Please visit my website www.weldingandndt.com
Dhanneyvad
nice sir
Thanks for clarifying
Thank you. Please visit my website www.weldingandndt.com/
This video is very helpful n very easy to understand so I request u Plz sir make a next part of this video as soon as possible
exellent
Thank you. Please join my channel to support my initiative. Joining link:
th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
V.nice sir
Sir, please continue..... 2nd part...
Thank you so much ji... I am preparing for interview... I Needed this video 100 percent...
This part is very good please do next part
Thank you. Please join my channel to support my initiative. Joining Link:th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Next part banaiye sir...
Thank you very much sir
Jarur banaiya sir....very nice..lacture...
Thanks. Please visit my website www.weldingandndt.com
Thank u sir
Thank you sir 🙏🏻
Thank you. Please join my channel to watch all the videos. Joining Link: th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Good job sir
Thanks. Please visit my website www.weldingandndt.com
Sir isometric drawing piping wala ka video banaiye
thanks for the information and i look forward to see more videos on welding
Thanks. Please visit my website weldingandndt.com
Thanks a lot sir.
Thanks for information sirrrrrrr
Thanks. Please visit my website www.weldingandndt.com
Many Thanks
Thank you. Please join my channel to watch all the videos. Joining Link: th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Pls do make the next part Sir .....ur fantastic your explanation is perfect and easy to understand!!!
Thank you very much 🙏
Sir, Please Your Introduction .
@@santoshnazare2790 Santosh ji Are you asking me?
Good job
Thank you. Please join my channel to support my initiative. Joining Link:th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Plz banayiye sir...
Very informative video
Thanks. Please visit my website www.weldingandndt.com
Thanks. Please visit my website www.weldingandndt.com
Good job and make next video on this part and also smaw wps step by step
Sure. Please visit my website www.weldingandndt.com
Good job please keep continue
Thanks for nice videos
NYC sir
Thanks. Please visit my website www.weldingandndt.com
Nice video
Thanks. Please visit my website www.weldingandndt.com
Tq so much sir
Thank you. Please visit my website www.weldingandndt.com
Thank you so much sir for your knowledge about welding.it will definitely help me in my courier
Sir plz welding ka drawing kse padhta ha uspa video bnae...kse structure ya fir pipe line ka drawing ma welding symbol ka use dekhaya...MATLAB practical video bnae...
Very helpful video , request to also teach the weld joint sizing
Thank you Jii
Thank you. Please join my channel to support my initiative. Joining Link: th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Please continue
Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/
Thanks a lot 🌹
Thank you. Please visit my website www.weldingandndt.com/
crispy clear, i was searching for a perfect video, and finally got it. Thanks a lot sir, love u sir. I have a suggestion (feedback) and request for you sir.
1)suggession: please use a collar mic , it will save your energy as well as audio will be more clear.
2) request : please clear why have you not considered root face as in our vessel drawing everywhere we use root face of 2 mm
Thank you. Please join my channel to watch all the videos. Joining Link: th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Thanks sir for your video, I learnt a lot from you....
Thanks a lot. Please visit my website www.weldingandndt.com/
Sir plz use the welding rod for proper application.....make the video on welding electrodes
My next video will be on selection of electrodes for different materials. Please keep in touch
GOOD INFORMATION
Thanks. Please visit my website weldingandndt.com
Sir ap ki next video kab AA rhi ha???
Best
Thank you. Please join my channel to support my initiative. Joining link:
th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Sir .kindly upload a second part of this bcz it's a very useful for us.. I hope u will upload shortly
Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/
Sir cswip ke preparation ke liye video banaeye
Sure. Please visit my website www.weldingandndt.com
Good
Thank you. Please join my channel to support my initiative. Joining Link: th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Sir upload weld consumables
Sir we r waiting with eagerly for ur NXT part of welding symbols ....
Planning for next part. Thank you. Please visit my website weldingandndt.com
Sir what do you mean by TYP in welding symbol
show lap joint symbol
Thanks you Sar
Thank you. Please visit my website www.weldingandndt.com/
What if the elementary symbol is below the reference line and the dashed line is above the reference line, then the weld is on the arrow side or on the other side?
I dont understand aws and iso weld symbol at 12:38 please give your refrence of information
Go for the next part
Sure. Thank you. Please visit my website for notes, videos and other important informations www.weldingandndt.com/
Next part jarur banaiye sir
Thanks. Please visit my website www.weldingandndt.com
Good explained
#tanweerahmed
Thank you. Please join my channel to support my initiative. Joining Link:th-cam.com/channels/H7nXSievFlbRKzKzEySbkw.htmljoin
Jarur banaiye.
Thanks a lot. Please visit my website www.weldingandndt.com/
Sir ham kaise samajhenge ki ye symbol ISO me hai AWS me hai pleasa explain sir
Drawing mein likha rehta hai
@@WeldingandNDT ok sir
What is difference between the arc welding and argon welding.?????
In indian what we mainly use AWS or ISO ?
AWS
Thanks sir
Thank you. Please visit my website weldingandndt.com
At 18 mins, the symbol drawn is wrong. As the welding is happening on other side,thus the symbol for weld should be down of the reference line. Isn't it.
Please clear if I'm wrong.
Thanks
To be precise, 17.51 sec.
AWS - 2nd example of groove weld
Second part link. Sir