Today I got my module and I am super happy with it! I am making custom tail lights for my 68 Cougar, which has a blinker sequence with 3 chambers on each side. I managed to set up everything I wanted - except one major thing. It seems like it's not possible to let the brake light or blinker fade on or off so it looks like an incandescent bulb? I could also make a video if that helps. Maybe the feature is just hidden. If it is missing, it would be a great addition to the program, since I could keep the classic look of incandescent bulbs.
Can I confirm this will work with RGBW COB Led strip that has 332 leds per meter. Kyle has told me the strip will work. I just want to confirm before I order everything in the new year
Can the BlueGhozt Lite be a direct replacement for a SP110E BT controller? Does it require the external 12/5v power supply and ground to be powered? My Quad Halo setup has a 12 to 5v power harness with 5 connects, 4 for the Halos or Strips, and 1 for the SP110E controller. Same wiring situation for my Underglow Strips. They come with a very basic/limited show modes and I was wondering if a Lite could be swapped in for a more customizable experience.
Yes it can be, it is a direct replacement for any existing Neopixel style controller. The only difference is we have 2 outputs, that you chain halos/strips end to end on and configure them slightly differently. Check out our installation information on our site to see how they work! They should work perfect for you!
Probably a dumb question, but obviously you have to use your phone via Bluetooth to change settings. Once all settings are configured, does the module remember them once your turn Bluetooth off? While in the car a lot of people use their phones Bluetooth for music, so do all of your settings remain stored in the module?
I have a YukonXl I am building a underbody kit for it using sk6812 rgb-nw neo pixel strips 5v 144leds per 1 meter. It will probably 1 meter strips front and rear each and sides pro9bout 1.5 meters each side I'm pretty sure that's well over 350 leds if they were connected all together going around the truck and I do want turn signal brakes and hazards tied into it. My question is how should it be wired to look as if they all work together seamlessly and which controller would I need? Also wondering if you were planning on later it being to upgrade later to have music interface to it i would be very interested in that also i have seen the vivi light controller that does this but doesnt integrate into the OEM car features thanks Kyle Pearson
If it is over 700 LEDs total then you won't be able to run them all with BlueGhozt. You'll need to run through your setup and see how many LEDs are in use. We might be adding a music feature in the future as well.
Today I got my module and I am super happy with it! I am making custom tail lights for my 68 Cougar, which has a blinker sequence with 3 chambers on each side. I managed to set up everything I wanted - except one major thing. It seems like it's not possible to let the brake light or blinker fade on or off so it looks like an incandescent bulb? I could also make a video if that helps.
Maybe the feature is just hidden. If it is missing, it would be a great addition to the program, since I could keep the classic look of incandescent bulbs.
How can I change my start up sequence and when I lock and unlock my car
could u pls tell me how to exactly connect the turn signals ???
You can splice into the wire harness itself, but it will require splicing
Im trying to find a setting to auto show mode when car is off, can you help me with this ?
Could you make a video on the 8-output harness version that LightingTrendz has on their site and what it looks like to have the 8 outputs?
We don't have or make that product, best bet would be to contact LightingTrendz
How can you change the pin you set in the lock screen?
Just disconnect power to the Blueghozt, when you reconnect the PIN will be reset
Can I confirm this will work with RGBW COB Led strip that has 332 leds per meter. Kyle has told me the strip will work. I just want to confirm before I order everything in the new year
Post a link to the strip you're trying to use, I'll let you know
Can the BlueGhozt Lite be a direct replacement for a SP110E BT controller? Does it require the external 12/5v power supply and ground to be powered? My Quad Halo setup has a 12 to 5v power harness with 5 connects, 4 for the Halos or Strips, and 1 for the SP110E controller. Same wiring situation for my Underglow Strips. They come with a very basic/limited show modes and I was wondering if a Lite could be swapped in for a more customizable experience.
Yes it can be, it is a direct replacement for any existing Neopixel style controller. The only difference is we have 2 outputs, that you chain halos/strips end to end on and configure them slightly differently. Check out our installation information on our site to see how they work! They should work perfect for you!
Probably a dumb question, but obviously you have to use your phone via Bluetooth to change settings. Once all settings are configured, does the module remember them once your turn Bluetooth off? While in the car a lot of people use their phones Bluetooth for music, so do all of your settings remain stored in the module?
the settings all stay saved in the app
I have a YukonXl I am building a underbody kit for it using sk6812 rgb-nw neo pixel strips 5v 144leds per 1 meter. It will probably 1 meter strips front and rear each and sides pro9bout 1.5 meters each side I'm pretty sure that's well over 350 leds if they were connected all together going around the truck and I do want turn signal brakes and hazards tied into it. My question is how should it be wired to look as if they all work together seamlessly and which controller would I need? Also wondering if you were planning on later it being to upgrade later to have music interface to it i would be very interested in that also i have seen the vivi light controller that does this but doesnt integrate into the OEM car features thanks Kyle Pearson
If it is over 700 LEDs total then you won't be able to run them all with BlueGhozt. You'll need to run through your setup and see how many LEDs are in use. We might be adding a music feature in the future as well.
@@ghoztlighting I'll have to measure and then I guess lo
@@MegaWolfman76 no you don't want to measure, you will need to count the number of LEDs
@@ghoztlighting I will thanks