Avanti with FMS 3665 2000KV 80mm on 7s WOW!!!!!

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ต.ค. 2024

ความคิดเห็น • 20

  • @M4rkmcc21
    @M4rkmcc21 ปีที่แล้ว +1

    So I done my 7s conversion on my Futura, L39, Rafale, Sirius, T7A ans F22! Best gains were my Futura where it went from 2.7kg of thrust to 3.3kg with only 100g weight gain. Can't wait to test her out! L39 is putting out 3450g! All Low timing. Sirius needs more air and a smaller exhaust tho. Only went from 2.4kg to 2850g. Good gains but not the best performance out the bunch. T32, Mirage and F5 next!! Thanks for giving me the advice and idea to go 7s mate. Cheers Mark 🇬🇧

  • @gooniac33
    @gooniac33 2 ปีที่แล้ว +1

    You are always pushing the limits!!! I will be getting some FMS escs that allow up to 8s… this way I can try these out!! My red bricks will do 7s as well… cant wait to try!’

  • @timjoostens8887
    @timjoostens8887 2 ปีที่แล้ว +1

    Awesome!!

  • @gooniac33
    @gooniac33 2 ปีที่แล้ว +1

    Been waiting for this one!!!

    • @ghoustanable
      @ghoustanable  2 ปีที่แล้ว +1

      All of a sudden I love my Avanti all over again. Definitely will be putting in more orders and replacing the entire fleet...LoL

    • @gooniac33
      @gooniac33 2 ปีที่แล้ว +1

      @@ghoustanable they are incredible fans even on 6s!!

    • @ghoustanable
      @ghoustanable  2 ปีที่แล้ว

      @@gooniac33 100% just uploading the 6s flight doesn't matter which way you go you can't go wrong with this EDF.

    • @RC_B5
      @RC_B5 ปีที่แล้ว

      any 8s will be tested?

  • @henryairconcepts2999
    @henryairconcepts2999 2 ปีที่แล้ว +1

    Im so scared to use it on 7S. I bench tested it this exact EDF with HW flyfun 120A 7S 4000mah. The edf blades disintegrate after 30 secs. I crapped my pants

    • @ghoustanable
      @ghoustanable  2 ปีที่แล้ว

      Wow... I have had several flights on my Avanti and L-39 with no problems. EDF runs smooth as butter.

    • @henryairconcepts2999
      @henryairconcepts2999 2 ปีที่แล้ว +1

      @@ghoustanable Yeah, I lied. I didnt use bench. I held the EDF with my hand, I probably subconciously squeze the cone and somehow rubs the blades on extremely high RPM. Im going to install it on my new Freewing Jas39, but worried I might crash it running on 7S

    • @ghoustanable
      @ghoustanable  2 ปีที่แล้ว

      @@henryairconcepts2999 that's the next EDF I'm going to be installing mine in I ordered three of them replaced my entire fleet with this setup

    • @henryairconcepts2999
      @henryairconcepts2999 2 ปีที่แล้ว +1

      @@ghoustanable If you said so, I might give another go a test. I have the same EDF on freewing F5. It’s been flying on 6s, will try on 7s

  • @sundayfloater2926
    @sundayfloater2926 2 ปีที่แล้ว +1

    Haw many amps did it pull on 6S and 7S ? Do you think the fms 2000 on 7s brings more speed than the freewing 1920 kv on 8S ? ... and will you try it on 8S ? 😁(..now that you measured a low temperature on 7S)

    • @ghoustanable
      @ghoustanable  2 ปีที่แล้ว +2

      6s 110 7s 137 ...FMS on 7s is faster than 1920 on 8s

  • @naveda08
    @naveda08 ปีที่แล้ว

    What kind of amps you think you are pulling on 7s?

    • @M4rkmcc21
      @M4rkmcc21 ปีที่แล้ว

      He tested it at max throttle 129A. Half throttle was about 70A.

  • @henryairconcepts2999
    @henryairconcepts2999 2 ปีที่แล้ว +1

    What ESC? hobbywing or FMS ?