DIY Gearless Electric Sliding Gate Using Wiper Motor || SEK AUSTRIA
ฝัง
- เผยแพร่เมื่อ 8 ธ.ค. 2021
- Project no.114 Make your Sliding Gate Electric Using Wiper Motor
I am so glad that my idea works well, and besides it is a low cost to make your Sliding Gate Electric!
you do not have to worry looking for a gear which is very expensive, all you just need is a car wiper motor and steel wire rope.
i hope you enjoy and learn about this project :D
LINKS THAT HAS BEEN USED IN THE VIDEO:
YOU CAN SUPPORT THIS CHANNEL BY BUYING THIS ITEMS.
Machifit MGN12H Linear Rail Block：bit.ly/2WFBoyn
Machifit MGN12 600mm Linear Rail Guide with MGN12H Block: bit.ly/2HT4WVP
Machifit MGN12 1000mm Linear Rail Guide with MGN12H Linear Sliding Guide Block: bit.ly/2FSsVSF
8mm Bore Diameter Pillow Block Ball Bearing: bit.ly/2OJeHX3
7pcs 12mm Shank CNC Lathe Turning Tool Holder Set: bit.ly/2K4VBMy
G1/4-19 13x2mm BSP 55 Degree Tap: bit.ly/2TSVnrB
Titanium Coated Deburring External Chamfer Tool: bit.ly/2OG5HCi
Pillow Block Bearing: bit.ly/2uE97MG
Push-pull type fast clamp: bit.ly/2FQ5k3N
2032mm x 13mm Saw Blade: bit.ly/2QRKYQb
Handheld Copper Pipe Tube Expander: bit.ly/2rWa6pW
SBR20-1200mm linear rail and SBR20UU Blocks: bit.ly/2RiKUIC
SBR16 1000mm Linear Rail and SBR16UU Bearing Blocks: bit.ly/2GIcniW
Drillpro Turning Tool Post Holder: bit.ly/2EUban5
SANOU K12-100 Lathe Chuck: bit.ly/2TextHc
Slide Bearing Block: bit.ly/2RhZe4d
Slide Bearing Block: bit.ly/2Q6K4tU
20Pcs Diamond Coated Core Drill Bit Set: goo.gl/mPZ4B6
Opening Locator: goo.gl/sQmMce
LIKE MY FACEBOOK PAGE / pinoydiybuilds
SUBSCRIBE TO MY CHANNEL / sekaustria
AND SUPPORT ME ON PATREON / sekaustria
Like Share Subscribe for a Weekly Videos
#SekAustria #DIY #Homemade - วิทยาศาสตร์และเทคโนโลยี
When I make stuff I always have to plan it out very meticulously. I watch all these other guys out there who just get on with making stuff. Not everything needs a lot of planning but it's hard to fight your nature.
Neat idea, well executed. Minor item: the u bold cable clamps were put on backwards. The saddle of the clamp should be on the "live" end of the line. "Never saddle a dead horse."
Thanks, didnt get what never saddle a dead horse means, after looking it from google now i understand how to put them properly.
Better make sure it's the right way. With all that high stress tourque and tention from the wiper motor... you could have a major catastrophic failure.. 🤣😂😁😀😎
@@SekAustria u71
Fred is right
Right said Fred!
Great time lapsing the video to make it watchable. Everyone should emulate this job.
Great design! The cable tensioner is perfectly simple!
That's another cool use for a wiper motor ... totally awesome
Nice mechanism bro.
Happy New Year 💥
Thanks bro happy new year din.
Love this channel.
Pick yourself up a 5" portable bandsaw, makes cutting thick steel plate easy.
Happy new year!
Happy new year 😁
Nice build man. Great editing too.
An excellent use of a part they may have been thrown out.🥂👏👏
Wow, it's still super warm in Austria 😳
Most fantastic! A fun and enjoyable project to watch. tHanks for posting it. Happy New Year...see you again soon!
Que buenas ideas y construcciones..SALUDOS A NUESTROS HERMANOS HISPANICOS DE FILIPINAS.
Genial, brilhante técnica 👏👏👏👏👏👏🙏🍀🇧🇷
Now, one sonoff with remoute and it's perfect! Nice ideea! 👍
That’s really awesome 👏 I like it so much congratulations
Glad to see you’ve gotten a ‘hammer’, instead of that claw hammer you always used. How about a limit switch on the face of the door to prevent smashing someone? I like how you repurpose things, keep’em coming.
Awesome dude. Real handyman!
ayos to. tagal ko na pinaiisipan yan. good job idol
Awesome idea put to an even greater use .
Amazing!!!!
Awesome to see that device/tool work, I bought one similar to that (smitty built) and the tool set was crap! They send me another one and same thing! I had to use two wrenchs and that actualy works better just tough on the hands
Good show old chap !
Well done !
nice build , for security you can add a pair of photocell , and a spring to tension the cable .
Very Nice. Well done!
Very nice project. It isn't really gearless because the gears come with the motor in the case. But it's true there's no additional gearing is needed.
Excelente proyecto muy bien desarrollado y mejor ejecutado , un sistema muy bueno para la puerta , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 🤓 😜
Finding your channel today on Christmas makes sense because it's a gift thank you and God bless
Very professional and nice work.
Cool idea
super idea
Que idéia maravilhosa ,chuta o que estou fazendo 👏✌
vc fez um igual?
Fantastic work, dude! Really well done!!! 😃
Stay safe there with your family! 🖖😊
Ayus ya. magaling kang talaga.
Simple and efficient
This is excellent work, I'll try it
Very clever.👍
Love the ingenuity, guessing that cable won't last long but you could always redesign some things
Bravissimo bella idea Ciao
Very good 😊 I like it,,, 👍 thanks
nice thank u for the info for got that old school I saw this b for in the 60s 💡💡💡
Harika eline sağlık ustam.Good dahank
If it's automatic, you might need sensors for somebody that might get caught in the middle while it's closing.
Nice trick. 👍👍👍👍👍
Install overload contractor. (Protect)
That is why he loosened the wire so that the pulley could slip in case of obstruction.....
Very nice.
Galing mo, pare! Magaya nga... :)
Fantastic great job 👍
Good idea..i want do this.thank bro
Awesome!
Well done.👍☘️
SO GOOD FROM IT
Nice one
مبدع
Subscribing immediately .... guess you don't need to beg people to Subscribe whilst doing a good Job Thumbs up man
Perfect ❤️👍🏻👌
Bạn làm rất tốt thật tuyệt vời
That is excellent my old neighbor always said to me a poor man don't have a size but lots of common sense 👍
I can't believe how fast he works. He must be in a hurry to get the door working to keep his kangaroos from getting away.
nice one
very good idea
Very Good Boss !
Subukan mo gawan ng remote control next either via app or bluetooth. Pano kaya kung all-steel gate, anong motor ang pwedeng gamitin as actuator, and pano kung swing-type?
@Добрый Человек Ok, I got the gist of that especially about gear ratio, other videos showed using a angle grinder head for that and a starter motor for torque. Thanks for your input.
Perfect, But what about in power failure.
You use your hand 👌
Just have a 12 volt battery as a back-up.
@@christianrazvan ko
LOL! There's always that one person.... ummm idk? Wonder what he did before the build??
Then you need to stay out buddy.... I am sorry...
Nice and simple 👌
👍👍👍😜🏴🦕🦄😁🤞✌
cool project sir, awesome and how many rpm are used on the wiper motor, i have high torque wiper 24v 30 rpm , can be use?? thx
Great Video 👍👍👍
Great Channel 👍👍👍
👋👋👋👋👋👋
clever 👍
Should have a pica pen for marking all those holes :-) I use one, many times per day, refill with Edding T25 ink
Drill bit very sharp.
Will it work manually when motor power switched off?
Wowoh seems like you have the same idea as of mine coz am 🤸using the machines as enginee of toy's car that are capable of carrying two to three charldren
7:47 Never saddle a dead horse.
love you gaes❤❤❤❤❤
Mantapzz...
Hello, I want you to explain about the delivery of the relay, or if you have a picture showing the method of delivery
If it cuts power via limit switch it would mean EVERYTIME someone will have to push the door back enough to DISENGAGE the limit switch HENCE the edit between opening and closing in the video. A simple spring in a looping wire will fix it and also keep tension in the wire.
@Fred Wills so definitely nothing like a (momentary micro limit switch). Thanks. Happy new year 👍
👍👏👏👏
Frigge n awesomw
You need an outside access switch, with security. But nice setup.
Top
Can we operate manually if the power is not available( Power failure time) ?
Great! how much the weight of gate?
Very cool idea, and great fabrication work. I'd like to see more details on how you used the relays to kick it on and off from the limit switches. It looks like the cable is looser in the final video than when you tightened it at first. Was there too much strain for the motor to move it with a lot of tension on the cable?
I loosen it a little for safety purpose, when someone accidentally be wedge in the motor pulley and the cable will just slip.
It's simple logic use 1 no and 1 nc in series...
@@digambertawde4353 - Having designed and built such systems, I can tell you it's a bit more complicated than that. The DC motor needs to have power polarity reversal capability to control direction of rotation and the relays need a lockout feature so that if both relays are accidentally activated at the same time it is impossible to short out the power supply.
@@Milosz_Ostrow you got a point there 😊
Hi congratulations..very well done..just wondering what's the name of the tool at 5 50.
Nut hand riveter
awesome video too
old saying never saddle a dead horse?
cable clamp was put on wrong
what about power supply...what did use for it
how about a quick release in case the power goes out
Hi, Would you please make a vedio on simple manual perforated machine for thin metal sheet (0.3 mm) with flexible die size, than can be changed.
Boss anong pangalan ung sensor nilagay mo para automatic cya mag stop. Salamat.
What about a wiring schematic? Also if it was a low voltage DC system could have backup in case of power outage and also for just a few more dollars make it Wireless nice work Buddy!
Boss, Any idea for a DIY Power Hammer?
Check my recent video i have built a power hammer
А схема подключения можно получить? Спасибо заранее! 👍👍👍
Y como lo abres por fuera? 🤔
Should have had a spring used as a cable tensioner.
Два ролика с натяжителем религия не позволила сделать, гений ....
Circuit video plz 😇
not that it is critical in this application but you have the cable clamps on backwards, the dead end of the cable should be clamped by the u bolt part.
What about the Dancing Girls at the end? Where did that go??!
Rope clips are installed wrong. Saddle goes on live end. “Never saddle a dead horse”.
Ok
U don't have kids, who could stay between the door and the wal while closing? Think of electrical car windows, which have a safety function for this purpose.
Hope you list down the materials needed... 😊
San ka po nakaka bili ng materyales na mura salamat idol keep up the good work!
Sa mga repair shop at junkshop