Thanks for this Matty, I have the same stack, I burnt a motor out so I think I better take a look at my blheli setup, it’s running DShot2400 but I never checked esc settings
Can't get the mil amps used in osd any idea? Its showing in my goggles but stays on 0 at all times and never changes. I'm on the same stack as you. I have also allready did these changes in the alpha gui. Its flying grate and all other osd information is working just not amps used and that for me is my fuel gage.
Current sensing doesn't work on both of mine either. Fettec docs imply for non fettec ESC's to run ESC current sense wire to SC pad on FC, but there is no SC pad on the G4HD. Pretty shoddy if you ask me, surely someone else has this question on why current sensing doesn't work on this combo. Rather important.
Thank you, I have the same stack and smoked 2 motors out the gate with before I saw this and "by RPM" PWM. Appreciate the info.
Nicely done brother 🤟
🚁
Thanks for this Matty, I have the same stack, I burnt a motor out so I think I better take a look at my blheli setup, it’s running DShot2400 but I never checked esc settings
Definitely check the variable PWM thing that’s gonna be a game changer
Thanks man my esc has Dshot2400 128k stamped on it so should I run this at 128k you reckon?
using this ESC with Kiss Ultra and have landed on the same settings as you - works great with 48khz pwm and 23 deg timing :)
Sweet lid bruh 😎
IYKYK
I run mine at 21 degree motor timing on this esc with my ultra and its actually flies a hair better than 23
Can you use the Tmotor pro II 55A ESC with this FC? If you change the settings to these you showed?
Sure why not? Just check the pin out to make sure it's ordered correctly and check the settings
Can't get the mil amps used in osd any idea? Its showing in my goggles but stays on 0 at all times and never changes. I'm on the same stack as you. I have also allready did these changes in the alpha gui. Its flying grate and all other osd information is working just not amps used and that for me is my fuel gage.
Current sensing doesn't work on both of mine either. Fettec docs imply for non fettec ESC's to run ESC current sense wire to SC pad on FC, but there is no SC pad on the G4HD. Pretty shoddy if you ask me, surely someone else has this question on why current sensing doesn't work on this combo. Rather important.
I have issue with receiver not detecting
Check your RX/TX isn’t reversed
@@MattyfleischFPV they aren't, should I select any port or it is by default