When I clicked on this video, I had no idea that it was one of your earlier tapes. After listening to it for a few minutes, I realized that it was, the famous, SHERRY MOULTON! I have the ability to remember faces and voices, but not names. So, in that way, Sherry, I'm special too. I've followed you for a year+. Love your videos. Sorry to hear of your husband and your deep freeze. I'm sure you'll make a ver cool 'cup' holder for your hubby.
tip from one artist to another: try using plastic bottles with little nozzle caps- they come in all different sizes and when youre done you just remove the caps turn them upside down and let the resin drip out, and peel it out after it has cured then you can reuse them and you wont be using and throwing away so many plastic bags. beautiful effect by the way!
Thanks so much and yes I have ordered some silicone cups I do have some of the little squeeze bottles I will have to try that thanks so much and thanks for watching 🥰🇨🇦
Just found your channel. Those coasters are beautiful. The interference or ghost colors are fun to work with. I find they show up better on a darker background, like that gorgeous blue you have.
I was able to pick up a few containers of resin at Michael's. Try searching up resin specifically but if not try your local home depot I found resin there as well. Love your work🥰
Beautiful! Was wondering, why not just do the blue layer first, let it cure and do NOT remove from molds. Then pour the clear/white/blue flower layer directly on top and let it cure, then remove from mold?
Great Job Sherry. I’d like to give a shout out to Julia Cutts, “Pouring Your Heart Cut” in New Zealand... she also does the floral coasters and generously shares her expertise. I loved the blue coaster in this video... it’s one of my favorites. Blessings!💙
Hi Sherry, I am loving that you use a lot of canadian products. Have you tried the mica powders or pigments from Windsor plywood. The few that i have used are awesome!
Love watching your videos. Thanks for sharing. Every time I try these I get an air bubble between the two layers. I press them down just a little - not too much. I swish them around. If my touch is to heavy the bottom layer comes up over the edges and I have a mess. Any tips or suggestions?
If you notice when you heated them with the heat gun they didn't move at all like they do on your newer videos so I think that it will work for you. When I don't want things to sink or move I wait till it's pretty warm before I start to use it.
might be a help if you make up clumps of your center for the flower ahead of time and let them cure,and then add them to the resin later when you start your project.
I just found this channel and I am loving it. But I have a question (I am new at this so maybe a stupid question) - why do you remove the top (with the white flower) and then add it back later? Why not just pour the blue glitter on top of the first piece after it is cured?
Thanks so much. Well I quit using this mold because it was leave a rim/lip so when I was trying this method I thought if I turned it over I then have 2 good sides and NO lip lol I now alot of work hahahaha but love the end results. Thanks so much for watching 🥰🇨🇦
They are beautiful. I can't buy Castin' Craft in England but I'm using alternative pigment pastes..trial and error - I won't give up until I get it right x
Hello, I loved your video and I found your superb coaster 💞 I have a question I live in Quebec Canada is there another product that I could find here to replace casting craft opaque white pigment ? thank you and i will continue to learn some tricks with you! thanks 💕
Looks wonderful, but why not take yellow or Orange for the inside of the flower? Now the inside of the flower falls away becouse the outsider is the same color?
Hey, sherry I am new to this field of resin art. Please explain few things if possible- 1 where we use pigments? 2 where we use alcohol ink? 3 where we use mica powder?
I'm kinda new as well learning as I'm going lol. You can use any them anytime and I even mix them together. I find the mica power usually gives a non transperant colour. The alcohol is used when you want a little bit of colour. I also use acrylic paint when I want a solid colour. I think pigments are matt and the mica powders a shimmery. I hope this helps.🥰 Thanks for watching 🥰🇨🇦
Beautiful! I tried this technique and ended up with air pockets on the bottom side when I put the flower top on creating the sandwich of the resin coasters. Any tips?
My day with resin is a day with a lot of brain freeze! Love the video just found your channel. Very nice,I watched you put the white pigment in your resin and of course yours worked! I myself did the same thing twice now and both two ounce have not set up. I know it was mix correct because I use the remaining resin which was about 10 ounces on another form and it did set up fine. The two ounce came out like a piece of rubber. Same brand of pigment went into both projects. Green pigment fine white did not set. And the two ounce got one drop of white and green at least five drops. My resin was stone coat casting epoxy. Would you have any suggestion ? Is it just the white pigment. And the pigment is compatible with resin I bought it together. Thanks for your time!
Hi, thank you for the video. Im trying to do the same design as you did here. However having issues with the white resin. A little while after the design is completed, the white resin sinks and all the design blends together. Any tips on how to avoid this from happening?.
In another video you mentioned that the reason you got such a beautiful flower effect this time is probably because you heated the resin, how much did you heat it and for how long?
Thanks sooooo much and thanks for watching. Yes actually it has to do with leaving your resin set for a bit. I now leave my resin set for 15 min before I start piping the white and it makes a huge difference. Once its piped you can use the heat gun to move it around but not for long. Hope this helps 🥰🥰🥰🇨🇦
I never played with epoxy. This video was recommended to me. I guess because I make soaps and such. Now I’m interested in other projects. 😩I’m crying because my house isn’t big enough for me and my experiments.
Thanks sooooo much and thanks for watching 😍 Now the first time I tried it I didn't wait at all and they turned out amazing that's the black ones, the second time was the blue set and it turned out , now I did another set and I warmed my resin up and that was not so good I could hardly hold the bag it was that hot in this set the white did not spread and was like a bunch of 3D lines I didn't like this lol. Now with the pink set I did not warm the resin but I think I over heated the white it was a lit toooooo spread hahaha ... such a trial and error 😜 can be expensive....... hope this helped a little. 🥰🇨🇦
Another cool project! I am wondering if you've ever used a color other than white for the petals? Do you use the white for a particular reason, like, does it's density have something to do with the way it keeps its shape or? Just wondering. Thanks!
I tried your method of the double pour, first one worked fine, took that one out and did the second pour, well when I put the first pour on top, there was places that I couldn’t get the trapped air out so I have soft spots, any ideas what to do to fix it?
How many layers of resin are put in the coasters? Can you tell me the process of putting in the things? Is it resin, glitter, pigment, and then resin? Or is it resin, pigment, resin, glitter, resin, pigment, then resin again? I just wanted to know. Btw I love your videos.
So for the first part I put clear resin in the mold then I add a small bit of glitter in the center then I put the white on. Leave it set for 24hr then I remove them from the mold add your glitter resin mix the mold then put the first layer on top. Hope this helps thanks so much and thanks for watching. 🥰🥰🥰🇨🇦
These are GORGEOUS (per usual with your coasters!)! I have a quick question...you stated you put a tbsp of blue glitter in with the resin but list it as tsp, is it actually a tsp? (Just FYI....it’s pronounced reck-ollections, not ree-collections 😊)
Sherry you let ur Resin sit a bit B4 adding the pigments? the reason I ask so far I been using Epoxy resin from UV Resin and I really Like Epoxy Resin better, but I been using my 24mm and some 20mm Ball Orb Mold i been trying Alcohol Inks the Lets Resin Inks nag they hardly give and effects for me, but Pinata yes are good, but the Ink when I drop in in my resin gives this running effects mainly on the sides not even being able to see the center on the orb, I saw many videos and they get some gorgeous effects. Now I do rush and drop my inks right after I add my Resin in, and my thoughts tell me maybe I should wait 15-20 minutes when I add my resin in my orb's or juz let it sit for that long so the inks won't fall and run down the sides to fast, thas my Theory at least maybe wrong, well hopefully you can help my love my runny inks LoL and Ur pieces came out sooooo Beautifully Muah Lovely😘 hope you can give me Advice TY 4 got to add sherry whats the work time of the resin Ur using?
Thanks so much and thanks for. Yes from my experience with alcohol in when you drop it in right away it will spread if you do wait a bit they will not spread as much. Hope this answered your question. Have fun creating 🥰🥰🥰🥰🥰🇨🇦
@@SherryMoulton : thank you Sherry, it sure did answer my question Deary😊 don't get offended me saying dear, I'm an older fella all out of respect, i'' still astonished of Ur work you did really stands out you know when you add a picture to ur video just an eye-catcher or it will make you look twice. forgot to ask after I mix it and in case there are bubbles i leave it sitting for 5-10 minutes, How much longer should I let it sit after the 5-10 minutes? you know I thought Exopy Resin have longer work time or pot life, but mostly some Resins have 20-40 minute work time B4 it starts getting gel like I thought one had hours to work, really new to Epoxy Resin used UV Resin for a bit, but Epxoy Resing is much better despite the long cure wait its worth it.
Thanks sooooo much and thanks for watching. No I have it and I just recieved my new one its blue .so will be playing around with it. Hopefully it will be the same as the white. 🥰🥰🥰🇨🇦
I wait 24hrs before removing them then make sure that you lay them on a flat surface because they may be soft will fully harden in 2 days . Thanks so much and thanks for watching 🥰🇨🇦
Yes I’m from Alberta, we are doing real good! Live in the rural area nw of Edmonton about 50 Klms. Where do you buy your glitter and Black diamond hues? I’m kind of tired of having to buy from the US, sometimes it takes forever! Would like to get some suppliers here in Canada! You keep well! Going to try these just love the flowers!
Can I ask why you pop them out and then put them on top of the background resin instead of just letting them cure and putting the background glitter on top? Just curious. Your coasters are gorgeous!
Sherry, I was watching this video, and seen how much of the white resin you use for the flower. Why don’t you make a flower only with the left over, then when it is cured, do some clear or coloured resin over the top of it! Or if it would all run together, add something else to it, like the curly cues in the flower loops, you wouldn’t need to much! I don’t know but it would use up the left over white! Just some thoughts! Are you by any chance from Canada? When you mentioned Master Craft, gave me the idea! Love your videos, learn a lot from you! As for your freezer been there done that!
Thanks so much for watching and yes I'm from Ontario Canada 🇨🇦 Yes I've now started making the full 6 coasters will have another video up sometime tomorrow. Not the first time for the freezer wow it was gross hahaha🤢🤮 So where are you from and I hope your being safe with all this crazy stuff going on 😍
Hi sherry I love your video and I am happy I found you .would you please tell me what glitter you used in the center of flower ? I try to find in Michaels but I did not find it .
Thanks so much I'm glad that you found me🥰🥰 the glitter in the center is called confetti tubes now I got these ones at the Dollarama here in Canada . I know that micheals sells them but not sure about the colours. Thanks so much for watching 🥰🥰🥰🇨🇦
Thanks sherry for response. What can I use instate conffite tubes ? I live in united state and I checked dollars tree and Michaels but i didn’t find it.
I Love watching and listening to your videos!
You are GREAT. 😻😻❤
So gorgeous. Being stuck at home I'm binge watching so many new ideas (for me). I want to try everything, lol.
Thanks so much and thanks for watching 🥰 would love to see what you make 🥰🇨🇦
Me too. Lol. Ive seen so many new and cool things
me too, I buy all the stuff I would need then I never end up doing it. if I do its weeks later. lol
Beautiful...they are called beads, for jewelry or any other craft you need them for. I love your creativity, thank you for sharing. So much love.
When I clicked on this video, I had no idea that it was one of your earlier tapes. After listening to it for a few minutes, I realized that it was, the famous, SHERRY MOULTON! I have the ability to remember faces and voices, but not names. So, in that way, Sherry, I'm special too. I've followed you for a year+. Love your videos. Sorry to hear of your husband and your deep freeze. I'm sure you'll make a ver cool 'cup' holder for your hubby.
tip from one artist to another: try using plastic bottles with little nozzle caps- they come in all different sizes and when youre done you just remove the caps turn them upside down and let the resin drip out, and peel it out after it has cured then you can reuse them and you wont be using and throwing away so many plastic bags. beautiful effect by the way!
Thanks so much and yes I have ordered some silicone cups I do have some of the little squeeze bottles I will have to try that thanks so much and thanks for watching 🥰🇨🇦
That is amazing that you can put a cured piece inside a non cured piece and the meld together like one!!! super cool!
Thanks so much and thanks for watching 🥰 I thought it turned out pretty good 🥰🇨🇦
Thank you, I loved this video! They all are beautiful so honey, stop being so hard on yourself. The ghost pigment was a great idea!
Beautiful! Cool technique.
Great idea! I love the way the blue background shows through the flower
Thanks so much 🥰 thanks for watching 🥰
I've been watching videos from several coaster artists. This is my favorite. The finished product is pretty from both sides.
“I am special” I love it!!!
🤩👏🏾👏🏾👏🏾👏🏾 just watching and realized “how am I not subscribed to this chic??” I have now rectified that.
Lol welcome to my special world lol. Thanks so much and thanks for watching and subscribing 🥰🥰🥰🥰🥰🇨🇦
Great tips. Your step by step demonstrations are great!
Thanks so much and thanks for watching. Love doing these 😍🇨🇦
I don't know why but I love the sound of the coasters knocking together
Thanks sooooo much and thanks for watching. Yes is does sound good lol🥰🥰🥰🇨🇦
Turned out beautiful
Love watching to learn more about resin pouring. Thank you
Thanks so much and thanks for watching 🥰🇨🇦
Wow! Those are really beautiful!
Thanks sooooo much 🥰
So pretty Sherry !!! Like always ! 👏👏🤩👏👏👏😍🖼💫👏👏🕊👩🎨😘
Thanks soooo much 🥰 Happy Easter 🐇🐰🐇🐰
Love your video and your work
Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦
Sherry, I love these!! You have inspired me to try to make some for myself. Thank you!!
Thanks so much and thanks for watching 🥰🇨🇦
Great video and technique! Thank you so much!
Thanks so much and thanks for watching 🥰🇨🇦
These are gorgeous. Love the 3D look
Thanks so much 😍
Wow just watched your channel for the first time. Oh yes! Gotta try this! You must be my long lost sister! 🌞❤️
Thanks so much and thanks for watching 🥰 lol well hello sister 😍
Wow, they turned out beautiful!!
Thanks so much and thanks for watching 🥰🇨🇦
These are gorgeous, I can't wait to try this myself. :)
Thanks so much would love to see them when you do 🥰 thanks for watching 🥰🇨🇦
Just found your channel. Those coasters are beautiful. The interference or ghost colors are fun to work with. I find they show up better on a darker background, like that gorgeous blue you have.
Thanks so much and thanks for watching 🥰 yes I'm excited to play this them a little more 🥰🇨🇦
I just found your channel and I’m loving your work!!! So beautiful these coasters 😍😍😍
Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦
Love this technique, and now I'm thinking a snowflake pattern in the white with the interference in it would be to die for!
Thanks sooooo much 🥰 I'm just in love with these even with all my miss happenings hahahahaha 🥰🇨🇦
Really nice depth you got in these.
Thanks sooooo much and thanks for watching 🥰🇨🇦
That’s such a cool idea love them❤️
Thanks so much and thanks for watching 🥰
I was able to pick up a few containers of resin at Michael's. Try searching up resin specifically but if not try your local home depot I found resin there as well. Love your work🥰
Thanks sooooo much I'm glad you found some..... Have fun creating 😍🇨🇦
I love your older videos too
Awesome so unique Beautiful!😁💯
Thanks so much and thanks for watching 🥰🇨🇦
Beautiful! Was wondering, why not just do the blue layer first, let it cure and do NOT remove from molds. Then pour the clear/white/blue flower layer directly on top and let it cure, then remove from mold?
Hi Sherry. Why did you take the flowers out of the mold vs pouring the blue onto? Thanks!
Nice job!!!...love the 3 D effect !
Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦
Great Job Sherry. I’d like to give a shout out to Julia Cutts, “Pouring Your Heart Cut” in New Zealand... she also does the floral coasters and generously shares her expertise. I loved the blue coaster in this video... it’s one of my favorites. Blessings!💙
Impressive! The flip and no lip. Subbing!
Thanks sooooo much and thanks for watching and SUBSCRIBING 🥳🥳🥳🥰🥰🇨🇦
Gorgeous Sherrie, I love the ghosting
Thanks me to was not sure if it would work. Happy Easter 🐇🐰🥰
Curiosity got me, had to see the blue ones also.
Lol I got you addicted hahaha. Thanks so much and thanks for watching 🥰🥰🥰🇨🇦
Hi Sherry, I am loving that you use a lot of canadian products. Have you tried the mica powders or pigments from Windsor plywood. The few that i have used are awesome!
Love watching your videos. Thanks for sharing. Every time I try these I get an air bubble between the two layers. I press them down just a little - not too much. I swish them around. If my touch is to heavy the bottom layer comes up over the edges and I have a mess. Any tips or suggestions?
If you notice when you heated them with the heat gun they didn't move at all like they do on your newer videos so I think that it will work for you. When I don't want things to sink or move I wait till it's pretty warm before I start to use it.
Thanks sooooo much next set I will be trying this 🥰🥰🥰 thanks so much for watching 🥰🥰🥰🇨🇦
might be a help if you make up clumps of your center for the flower ahead of time and let them cure,and then add them to the resin later when you start your project.
I just found this channel and I am loving it. But I have a question (I am new at this so maybe a stupid question) - why do you remove the top (with the white flower) and then add it back later? Why not just pour the blue glitter on top of the first piece after it is cured?
Thanks so much. Well I quit using this mold because it was leave a rim/lip so when I was trying this method I thought if I turned it over I then have 2 good sides and NO lip lol I now alot of work hahahaha but love the end results. Thanks so much for watching 🥰🇨🇦
They are beautiful. I can't buy Castin' Craft in England but I'm using alternative pigment pastes..trial and error - I won't give up until I get it right x
Hello, I loved your video and I found your superb coaster 💞 I have a question I live in Quebec Canada is there another product that I could find here to replace casting craft opaque white pigment ? thank you and i will continue to learn some tricks with you! thanks 💕
Looks wonderful, but why not take yellow or Orange for the inside of the flower? Now the inside of the flower falls away becouse the outsider is the same color?
So pretty!
Thanks so much and thanks for watching 🥰🇨🇦
Hey, sherry I am new to this field of resin art. Please explain few things if possible-
1 where we use pigments?
2 where we use alcohol ink?
3 where we use mica powder?
I'm kinda new as well learning as I'm going lol. You can use any them anytime and I even mix them together. I find the mica power usually gives a non transperant colour. The alcohol is used when you want a little bit of colour. I also use acrylic paint when I want a solid colour. I think pigments are matt and the mica powders a shimmery. I hope this helps.🥰 Thanks for watching 🥰🇨🇦
@@SherryMoulton thanks..much clearer picture for me
Glad I could help anytime 🥰🇨🇦
Love watching you create. Always lovely results. Can I ask a question please? Is that a 30ml cup you were using to put the initial resin in? Thanks!
Thanks sooooo much and thanks for watching. Yes it is. 🥰🥰🥰🇨🇦
Gorgeous
Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦
Beautiful! I tried this technique and ended up with air pockets on the bottom side when I put the flower top on creating the sandwich of the resin coasters. Any tips?
I looooove these. Just curious, do you use any other ppe or ventilation besides gloves and an open window?
My day with resin is a day with a lot of brain freeze! Love the video just found your channel. Very nice,I watched you put the white pigment in your resin and of course yours worked! I myself did the same thing twice now and both two ounce have not set up. I know it was mix correct because I use the remaining resin which was about 10 ounces on another form and it did set up fine. The two ounce came out like a piece of rubber. Same brand of pigment went into both projects. Green pigment fine white did not set. And the two ounce got one drop of white and green at least five drops. My resin was stone coat casting epoxy. Would you have any suggestion ? Is it just the white pigment. And the pigment is compatible with resin I bought it together. Thanks for your time!
Beautiful and Happy Easter to you
Thanks so much and Happy Easter to you as well 🥰
Omg 😳 luk so Amazing ❤️👌🏻Waoooo
Plz plz can u explain for Beginners. What we need & How many resin I mean measurements.
May I ask directions on mixing the white, also where did you get the white? Beautiful
Looks amazing
Thanks sooooo much and thanks for watching 🇨🇦🥰🥰🥰
Hi, thank you for the video. Im trying to do the same design as you did here. However having issues with the white resin. A little while after the design is completed, the white resin sinks and all the design blends together. Any tips on how to avoid this from happening?.
Pretty pretty pretty!!!
Thanks so much and thanks for watching 🥰🇨🇦
Hi,
I have subscribed to your channel, you make beautiful coasters
Thanks so much 🥰 thanks for subscribing and watching 🥰🇨🇦
When I have extra left, I always have an extra little project to dump my extra resin in, a bookmaker or something
Yes for sure.... I hate to waste the resin soooo expensive... Happy Easter and stay safe 🥰
A book-marker not maker lol dang autocorrect
Lol I hate auto correct 🤣
They look great! Happy Easter!
Thanks and Happy Easter to you as well🥰
simply gorgeous. would have loved to see it in red.
Thanks so much and thanks for watching. Well that could be done 😍😍😍🇨🇦
In another video you mentioned that the reason you got such a beautiful flower effect this time is probably because you heated the resin, how much did you heat it and for how long?
Thanks sooooo much and thanks for watching. Yes actually it has to do with leaving your resin set for a bit. I now leave my resin set for 15 min before I start piping the white and it makes a huge difference. Once its piped you can use the heat gun to move it around but not for long. Hope this helps 🥰🥰🥰🇨🇦
Sherry Moulton thank you!!
I never played with epoxy. This video was recommended to me. I guess because I make soaps and such. Now I’m interested in other projects. 😩I’m crying because my house isn’t big enough for me and my experiments.
Hahahaha I know the feeling to many things not enough room, time and of course money lol. Thanks so much and thanks for watching 🥰🥰🥰🇨🇦
I absolutely love your coasters. I have a question, do you let your resin sit (particularly the white) so it's thicker and stays put?
Thanks sooooo much and thanks for watching 😍 Now the first time I tried it I didn't wait at all and they turned out amazing that's the black ones, the second time was the blue set and it turned out , now I did another set and I warmed my resin up and that was not so good I could hardly hold the bag it was that hot in this set the white did not spread and was like a bunch of 3D lines I didn't like this lol. Now with the pink set I did not warm the resin but I think I over heated the white it was a lit toooooo spread hahaha ... such a trial and error 😜 can be expensive....... hope this helped a little. 🥰🇨🇦
And no I don't wait , I mix all the resin and then hit record to video so you see when I do the white i dont wait ...
Had that happen to me too, with my freezer.
Beautiful
Thanks sooooo much and thanks for watching 😍😍😍🇨🇦
Beautiful !! Do you let your resin sit, how long ??
Another cool project! I am wondering if you've ever used a color other than white for the petals? Do you use the white for a particular reason, like, does it's density have something to do with the way it keeps its shape or? Just wondering. Thanks!
No I've never used a colour but willing to try lol thanks so much and thanks for watching 🥰🥰🥰🇨🇦
So pretty...
Fabulous work. What are the metallic curly-cues actually called? I’ve been looking for something like that and can’t find it.
Thanks sooooo much and thanks for watching. They are called mini confetti tubes. 🥰🥰🥰🇨🇦
Beautiful.
Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦
I Luv these. I've gotta order some molds.
Thanks so much 😍 and thanks for watching . I just put up my new one like this but pink's..... 🥰🇨🇦
These are so beautiful! Maybe I'll be courageous and give it a try!
Thanks so much go for it and please I would love to see how they turn out😍 thanks for watching 😍🇨🇦
Visit
N by
Beautiful 🦋🌹❤️❣️
I tried your method of the double pour, first one worked fine, took that one out and did the second pour, well when I put the first pour on top, there was places that I couldn’t get the trapped air out so I have soft spots, any ideas what to do to fix it?
How many layers of resin are put in the coasters? Can you tell me the process of putting in the things? Is it resin, glitter, pigment, and then resin? Or is it resin, pigment, resin, glitter, resin, pigment, then resin again? I just wanted to know. Btw I love your videos.
For the first part of the coasters before the glitter at the bottom.
So for the first part I put clear resin in the mold then I add a small bit of glitter in the center then I put the white on. Leave it set for 24hr then I remove them from the mold add your glitter resin mix the mold then put the first layer on top. Hope this helps thanks so much and thanks for watching. 🥰🥰🥰🇨🇦
@@SherryMoulton Thank you so much!
Your welcome 🥰🥰🥰
These are GORGEOUS (per usual with your coasters!)! I have a quick question...you stated you put a tbsp of blue glitter in with the resin but list it as tsp, is it actually a tsp? (Just FYI....it’s pronounced reck-ollections, not ree-collections 😊)
Awesome!
Sherry you let ur Resin sit a bit B4 adding the pigments? the reason I ask so far I been using Epoxy resin from UV Resin and I really Like Epoxy Resin better, but I been using my 24mm and some 20mm Ball Orb Mold i been trying Alcohol Inks the Lets Resin Inks nag they hardly give and effects for me, but Pinata yes are good, but the Ink when I drop in in my resin gives this running effects mainly on the sides not even being able to see the center on the orb, I saw many videos and they get some gorgeous effects. Now I do rush and drop my inks right after I add my Resin in, and my thoughts tell me maybe I should wait 15-20 minutes when I add my resin in my orb's or juz let it sit for that long so the inks won't fall and run down the sides to fast, thas my Theory at least maybe wrong, well hopefully you can help my love my runny inks LoL and Ur pieces came out sooooo Beautifully Muah Lovely😘 hope you can give me Advice TY 4 got to add sherry whats the work time of the resin Ur using?
Thanks so much and thanks for. Yes from my experience with alcohol in when you drop it in right away it will spread if you do wait a bit they will not spread as much. Hope this answered your question. Have fun creating 🥰🥰🥰🥰🥰🇨🇦
@@SherryMoulton : thank you Sherry, it sure did answer my question Deary😊 don't get offended me saying dear, I'm an older fella all out of respect, i'' still astonished of Ur work you did really stands out you know when you add a picture to ur video just an eye-catcher or it will make you look twice. forgot to ask after I mix it and in case there are bubbles i leave it sitting for 5-10 minutes, How much longer should I let it sit after the 5-10 minutes? you know I thought Exopy Resin have longer work time or pot life, but mostly some Resins have 20-40 minute work time B4 it starts getting gel like I thought one had hours to work, really new to Epoxy Resin used UV Resin for a bit, but Epxoy Resing is much better despite the long cure wait its worth it.
Sherry have you ever tried a different color other then white. I ordered the white castin craft op but I got yellow and blue.
Thanks sooooo much and thanks for watching. No I have it and I just recieved my new one its blue .so will be playing around with it. Hopefully it will be the same as the white. 🥰🥰🥰🇨🇦
Very pretty Sherry. My top edge always has a lip. Does yours? How do you get rid of it?
Thanks so much and thanks for watching 🥰 Yes this is why I tried it so both sides are smooth 🥰🇨🇦
Beautiful Sherri, how long do you let your resin sit
love it. how long do you wait before removing them from the mold?
I wait 24hrs before removing them then make sure that you lay them on a flat surface because they may be soft will fully harden in 2 days . Thanks so much and thanks for watching 🥰🇨🇦
@@SherryMoulton thank you
It's blue Pearl. Pretty ❤️
Thanks sooooo much and thanks for watching 🥰🇨🇦
Yes I’m from Alberta, we are doing real good! Live in the rural area nw of Edmonton about 50 Klms. Where do you buy your glitter and Black diamond hues? I’m kind of tired of having to buy from the US, sometimes it takes forever! Would like to get some suppliers here in Canada! You keep well! Going to try these just love the flowers!
That's good we are safe as well . I get my pigments off of Amazon and the glitters I get from micheals.
@@SherryMoulton where can I find the molds. You make me want to do these
I have these in my Amazon shops here are the links
Canadian www.amazon.ca/shop/sherrymoulton
USA www.amazon.com/shop/sherrymoulton
the group of four look like chrysanthemums 💜💜💜
Thanks sooooo much and thanks for watching 🥰🇨🇦
Can I ask why you pop them out and then put them on top of the background resin instead of just letting them cure and putting the background glitter on top? Just curious. Your coasters are gorgeous!
Thanks for watching 🥰 I hate sanding so if I flip them both sides are nice and smooth......
Sherry Moulton ahhh! Makes sense! Thanks!
Not everything I do makes sense lol 🥰
Sherry Moulton lol too funny!
Sherry Moulton I love this. Thank you. Where did you get those large molds
Sherry, I was watching this video, and seen how much of the white resin you use for the flower. Why don’t you make a flower only with the left over, then when it is cured, do some clear or coloured resin over the top of it! Or if it would all run together, add something else to it, like the curly cues in the flower loops, you wouldn’t need to much! I don’t know but it would use up the left over white! Just some thoughts! Are you by any chance from Canada? When you mentioned Master Craft, gave me the idea! Love your videos, learn a lot from you! As for your freezer been there done that!
Thanks so much for watching and yes I'm from Ontario Canada 🇨🇦 Yes I've now started making the full 6 coasters will have another video up sometime tomorrow. Not the first time for the freezer wow it was gross hahaha🤢🤮 So where are you from and I hope your being safe with all this crazy stuff going on 😍
Can you use primary elements in your resin to make coasters?
love! can you show how you mix the white? please
Thanks sooooo much. The white is 2oz of resin and 10 drops of casting craft opaque pigment that's it 🥰🇨🇦
For your husband's pudding cup thing you are making use a rubber or silicone it will grip the cup better, maybe it is just a thought.
So pretty 😃❤️💙
Thanks sooooo much and thanks for watching 🥰🇨🇦
@@SherryMoulton you most welcome Sherry!!! Great job 👍👏👏👏💕
🥰🥰🥰
Put some charcoal in your freezer and basement it will absorb Oder's. Love the coasters
Thanks so much smell is gone thanks goodness 🤮🤣🥰 Thanks so much and thanks for watching 🥰🥰🥰🇨🇦
Hi sherry I love your video and I am happy I found you .would you please tell me what glitter you used in the center of flower ? I try to find in Michaels but I did not find it .
Thanks so much I'm glad that you found me🥰🥰 the glitter in the center is called confetti tubes now I got these ones at the Dollarama here in Canada . I know that micheals sells them but not sure about the colours. Thanks so much for watching 🥰🥰🥰🇨🇦
Thanks sherry for response. What can I use instate conffite tubes ? I live in united state and I checked dollars tree and Michaels but i didn’t find it.
You could use any glitter . I just had them on hand. Thanks 🥰🥰🥰🇨🇦
I know you were not sure what you did different with the blue ones.... the hole was a little bit larger because the circles are a little bit wider.
Thanks yes I think your right. Thanks so much and thanks for watching 🇨🇦🥰🥰🥰
What makes these flowers float and layer like that ??