ebm-papst R2E150-AN91-xx

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น • 21

  • @thomas_ww.
    @thomas_ww. ปีที่แล้ว +3

    thanks a lot for the tutorial!
    Hint: Never push the bearing on the inner ring. With that the bearing gets damaged. As long the bearing has not to get pushed in deeply, just lay the old bearing on the new one and smoothly hammer it down.
    For deep seat you would have to grind the old bearing on the other level, so that it does not stay in as well. However this constraint is not given for this motor.

  • @ragnarroeck
    @ragnarroeck ปีที่แล้ว

    Thanks a lot!. This worked nicely on my Wotdke Frank Water+ (Aludisc is not pressed on axle, but fastend by a 2mm hexagon socket grub screw and leaves a mark on the axle, which needs to be removed, or the bearings won't slide over it. Motorcable is quite long, you need to remove the right side (with the display) anyways, it's laid in a ring there with cable ties, but you can get ~80cm from there to work with the motor still plugged in. Saved me €480 for the motor alone (for the original replacement part).

  • @jeanluc00420
    @jeanluc00420 3 ปีที่แล้ว

    Hey dude, many thanks for your video, it actually saved me quite a lot of money! I did exactly as you have shown and the smoke extractor became silent again! Big kudos!

  • @garlicandchilipreppers8533
    @garlicandchilipreppers8533 9 หลายเดือนก่อน

    6082 is a very common bearing size, thanks for the video, I have another sort ebm-papst fan but the princible looks the same.

  • @HayaBub
    @HayaBub 3 ปีที่แล้ว

    Thank you, geets from Germany

  • @joaquindominguezisabel3100
    @joaquindominguezisabel3100 2 ปีที่แล้ว

    Hola, muy bien explicado. Me podrias decir si puedo comprar esa Junta verde finita que va entre las dos chapas? A mi se me rompió cuando la desarme, gracias

  • @surf2alan
    @surf2alan  ปีที่แล้ว

    @ Thomas W. Thanks for the tip :)

  • @viezekutsjomp
    @viezekutsjomp 4 ปีที่แล้ว

    Saved me 400 euro! Tnx

  • @ievgeng
    @ievgeng 3 ปีที่แล้ว

    Thank you for your video)

  • @Kelevra1989
    @Kelevra1989 ปีที่แล้ว

    Ciao grazie per la guida innanzitutto. Che misura di cuscinetti servirebbe ? Non è che potete postarne il link per acquistarli?

  • @sevnpicoferro5352
    @sevnpicoferro5352 11 หลายเดือนก่อน

    Love you man 👍

  • @andik.625
    @andik.625 ปีที่แล้ว

    Thanks for the video! Unfortunately the motor still makes a grinding noise. I've changed the ball bearings twice now. What did i do wrong?

    • @surf2alan
      @surf2alan  ปีที่แล้ว

      I have used SKF 608-2Z/C3GJN bearings, and they are silent and with high temperature grease. I made a test setup with the fan mounted on a workbench and used some old type incandescent lamp, one 15watt and one 25 watt inserted between the 230VAC and the fan, thereby the fan rotated slowly and you can listen for bearing noise. Good luck.

  • @surf2alan
    @surf2alan  2 ปีที่แล้ว

    @Joaquin, Thanks for the comment.
    I do not know if one can buy the green fiber disc.

    • @MElekiaZ
      @MElekiaZ ปีที่แล้ว

      Rika Domo? Do you know the reference?

  • @Anthony-j6y2p
    @Anthony-j6y2p ปีที่แล้ว

    Do you know whats mean 2 last numbers xx of r2e150-an91-xx

    • @surf2alan
      @surf2alan  ปีที่แล้ว +1

      Yes, xx is for different connector type for individual brands

    • @czareksto6621
      @czareksto6621 3 หลายเดือนก่อน

      Powiedz mi czy silnik r2e150-an91-61 mogę zamienić na r2e150-an91-05 ?

    • @czareksto6621
      @czareksto6621 3 หลายเดือนก่อน

      Potrzebuję pilnie pomocy. Stary silnik się zepsuł i nie mogę kupić takiego samego. Jest tylko dostępny z końcówką 05

    • @czareksto6621
      @czareksto6621 3 หลายเดือนก่อน

      @@surf2alan