Thank you thank you so much for that information you shared with us I'm really grateful man thank you thanks again I have an Acura 2001 it's giving me some issues on transmission
Exact same issue in a 2005 Honda accord ex v6. 2/3 wires had disconnected for the G151 ground lug, causing two error codes. P0962 P0966 Fixed it with a temporary new connector, will just a replacement Honda OEM wire harness. Only $17.
I found my broken ground wire that goes to G151. I was just going to replace the entire wire harness to the 3 connections and ground - do you happen to know the part number for that small wire harness cause I can't find anything in my searches?
Do you know where I could find a replacement g151 metal bracket, idk if you made your own substitute or bought a new one. I just don’t know what to call when searching in google to buy one.
Hello, my friend, my 2007 Odyssey has P0962 and P0970 fault codes. At that time, the control circuits of the gear solenoid valves A and C were too high. After disassembling, I found that the wires of A and C were broken. After replacing them, P0962 and P0970 fault codes appeared again. Now I can't find out where the fault occurred. Please tell me how to repair it! Thank you
Big thanks, I had a P0970 code and this ground location was the culprit. This could have taken me forever to find without this video.
I’m glad you came across this video and were able to fix the issue as most places would’ve probably tried to sell you a transmission.
Thank you thank you so much for that information you shared with us I'm really grateful man thank you thanks again I have an Acura 2001 it's giving me some issues on transmission
No problem hope it works for you!
Exact same issue in a 2005 Honda accord ex v6.
2/3 wires had disconnected for the G151 ground lug, causing two error codes. P0962 P0966
Fixed it with a temporary new connector, will just a replacement Honda OEM wire harness. Only $17.
Glad it worked for you!
Do you know the part number?
I might have the same problem I’m getting a po 798 I tested the selenoids manually with a battery they all work
Most likely you have the same problem very common issue on that ground wire
I found my broken ground wire that goes to G151. I was just going to replace the entire wire harness to the 3 connections and ground - do you happen to know the part number for that small wire harness cause I can't find anything in my searches?
No I’m not sure what the part number is try calling the dealer and see if they can find it for you
Thank you so much
No problem glad it helped!
Do you know where I could find a replacement g151 metal bracket, idk if you made your own substitute or bought a new one. I just don’t know what to call when searching in google to buy one.
I’m not sure you’re gonna be able to find that anymore due to the age of the vehicle your only option might be a junkyard. I just made my own
Hello, my friend, my 2007 Odyssey has P0962 and P0970 fault codes. At that time, the control circuits of the gear solenoid valves A and C were too high. After disassembling, I found that the wires of A and C were broken. After replacing them, P0962 and P0970 fault codes appeared again. Now I can't find out where the fault occurred. Please tell me how to repair it! Thank you
Hi you would have to test the wiring and see where you have a broken wire and once you get that repaired you should be good to go.
Thanks buddy
No problem!