HP LaserJet Enterprise 500 MFP M525 how to Connect the printer to a network using a network cable

HP LaserJet Enterprise 500 MFP M525 how to Connect the printer to a network using a network cable.This is what you need to do for you to achieve the goal of connecting your hp laserjet to the network .Follow the on-screen instructions. When prompted, select the Connect through a wired network option. From the list of available printers, select the one that has the correct IP address. If the printer is not listed, manually enter the printer's IP Address, Host Name, or Hardware Address.
To connect the HP LaserJet Enterprise 500 MFP M525 printer to a network using a network cable, follow these steps:
Prepare the Printer:
Make sure the printer is powered on and in a ready state.
Locate the Ethernet port on the back of the printer.
Connect the Network Cable:
Take one end of the network cable (Ethernet cable) and insert it into the Ethernet port on the printer.
Take the other end of the network cable and connect it to an available network port on your router or network switch.
Configure Network Settings (Optional):
If your network uses DHCP (Dynamic Host Configuration Protocol), the printer will automatically obtain an IP address from your network. In this case, no further configuration is necessary.
If your network uses static IP addresses, you may need to configure the network settings on the printer manually. Refer to the printer's user manual or HP's support documentation for specific instructions on setting a static IP address for your model.
Verify Network Connection:
Once the network cable is connected, the printer will attempt to establish a network connection.
Check the printer's display or control panel for any network-related indicators or status messages. The printer should indicate a successful network connection.
Test Printing:
To confirm that the printer is successfully connected to the network, try printing a test page or a document from a computer connected to the same network.
Install the necessary printer drivers on your computer if you haven't done so already. You can download the drivers from the official HP website.
By following these steps, you should be able to connect the HP LaserJet Enterprise 500 MFP M525 printer to your network using a network cable.

[@SeharTariq-o1w]

What if it’s not pinging and how do you know the last ip address which have 100 in it

[@thiagonascimento3602]

Me ajudou muito

[@azaniatutoria]

thanks

[@valdissh5646]

Hi
Please can somebody help me?, I have a Hp laserjet 500 m575dn but the WiFi is not installed!, the WiFi buttons is not showing in the menu!
Please can somebody tell me how can I install the WiFi on the Printer?
Thanks to everyone for supporting

[@bassoniatv]

But even if you don't have a wireless printer you may print like you do have wireless, you do need to have a wireless route. Connect M575 to wireless route with RJ45 network cable and setup M575 as a network IP printer from your laptop. After that you can print from your laptop like wirelessly but it's wired really.

[@bassoniatv]

i dont think it has wifi but it has a network port where u can connect

[@juliesteffers4097]

Very helpful video thanks