I have been using my Milwaukee M18 batteries (from my drill driver and electric impact) to power heated grips on my snowblowers, which really works slick! I was going to install one of these modules on it so as not to run the battery too far down, but after looking at how fragile they're built, I decided to just hook up a voltage gauge instead and just watch the voltage so it doesn't drop too far. My 1-1/2 ah will shut down at 17.6 volts so that's my cutoff line.
I have two LifePo4 batteries, Basen Green 11.7kWh 51.2V (BG), and Ecoflow Delta pro - inverter 48V 3.6kWh (DP). I use BG to charge a DP battery via XT60 solar input (400W 8A). With the DP application, it is not possible to set the BG not to be completely discharged? Would be such adjustable 48V DC Over and Under Voltage Monitoring Protection Relay suitable for my batteries, so that voltage limit (under 51V) will stop charging DP from BG battery?
If you have SCC that have the correct range for your Low voltage disconnect and reconnect value then you dont need this module. It serves the same purpose.
SSR mean Solid State Relay. in this presentation I uses a DD SSR, control is DC and output is for DC since its disconnecting the battery DC supply directly.
very good explain, now i need look for when solar feed battery that day time (LDR Light Dependent Resistor) switch on feed any on, till dark time switch off dont feed any, save battery for use other. hope you know what i mean.
Assalamu alaikum bhai aap meri video Dekhe ismein koi masla hai ya nahin acchi bani hai ya galat Mujhe batana please th-cam.com/channels/7SrJawSTgRfxMWKZP0xEBQ.html
I have been using my Milwaukee M18 batteries (from my drill driver and electric impact) to power heated grips on my snowblowers, which really works slick! I was going to install one of these modules on it so as not to run the battery too far down, but after looking at how fragile they're built, I decided to just hook up a voltage gauge instead and just watch the voltage so it doesn't drop too far. My 1-1/2 ah will shut down at 17.6 volts so that's my cutoff line.
Thanks for all the work
I have two LifePo4 batteries, Basen Green 11.7kWh 51.2V (BG), and Ecoflow Delta pro - inverter 48V 3.6kWh (DP). I use BG to charge a DP battery via XT60 solar input (400W 8A). With the DP application, it is not possible to set the BG not to be completely discharged? Would be such adjustable 48V DC Over and Under Voltage Monitoring Protection Relay suitable for my batteries, so that voltage limit (under 51V) will stop charging DP from BG battery?
What's different use from SCC 12v port and use this way
If you have SCC that have the correct range for your Low voltage disconnect and reconnect value then you dont need this module. It serves the same purpose.
what is ssr? Is it DA(dc to ac) or DD(dc to dc)?
Sam questions. Ssr. Which amp?
SSR mean Solid State Relay. in this presentation I uses a DD SSR, control is DC and output is for DC since its disconnecting the battery DC supply directly.
very good explain, now i need look for when solar feed battery that day time (LDR Light Dependent Resistor) switch on feed any on, till dark time switch off dont feed any, save battery for use other. hope you know what i mean.
Hi good day what kind of SSR or what is the specs of SSR?
Thank you
Assalamu alaikum bhai aap meri video Dekhe ismein koi masla hai ya nahin acchi bani hai ya galat Mujhe batana please
th-cam.com/channels/7SrJawSTgRfxMWKZP0xEBQ.html
Good info.
Bergnaum Pine
Gonzalez Elizabeth Wilson Robert Thomas Maria