The first time i had to make a key for these (10 or so years ago) i couldn't find how to take the core out. I ended up sliding 2 shims on either side and then cutting my key deeper so the shims pass the wafer. Took nearly an hour, but i got right on the first try.
Thanks for doing this video it was interesting to see your process. I have absolutely no experience with car locks, picking them or making keys for them, however I was ask to do just that recently for a family member so I thought I would give it a try. It was a toyota Celica Gen 5 all keys lost and it was located out in the Country so no mobile service. I took a blank key toy 30 with me ( that's all the locksmith had in stock one blank) and had one chance to get it right. I had my hand tool lishi cutter and files. I incorrectly assumed that it would be the same as any other furniture wafer lock. Once I had the lock removed from the car I went about trying to cut the key, however not understanding the lock and how the wafers on each side interacted with the key. Which ones were the top which were the bottom cuts. I was out of my depth having no knowledge. I tried cutting both sides of the key for each wafer at the same time. This turned out to be my mistake. I should have just done one side first then the other. My brain was experiencing brain fog and I couldn't think my way through what I needed to do. I managed to get four of the seven cuts done but didn't want to risk stuffing up the only key, so I aborted cutting the deep cuts as I didn't know which side of the key they interacted with. Yes I learned a lot that day and learning on the go is a great way to figure things out, but I would have loved to have had just a small amount of base knowledge about the lock so that I could have understood what I needed to do. All the years of watching your channel has given me a lot of understandings, but I was all at sea that day,. I ended up getting the code from the side of the lock, had to go to the city and got a locksmith to finish cutting the key. They used the program you used to fill in the missing wafers for the ignition, as I had the door lock and the key was cut on the machine. cheers
At least you tried! If you had instacode you can input the code and actually see a picture of what the cut Key should look like. Props for trying! And when you learn that way you definitely retain the info better.
@@BoredLockpicker I really do appreciate your support and encouragement. thank you. We don't get much internet access out in the Country and there is no locksmith for 100kms. So I will be doing some residential stuff to help out the locals whenever I am up that way. Just word of mouth jobs, not going to go into business, just keep it casual. I so do enjoy locksmithing and locksport, cheers
Perrylocksmith How did you calibrate your 005 to work with the new M5 key vice , ? Is it a different xHorse app. You have really good videos. Thanks for your hard work. Jim 17:59
spending 50-60 dollars on a tool I dont need plus going to the junkyard paying for a lock just for a video...If you want to donate towards the tool there's a link in the description
Instead of removing wafers couldn't you use depth and space keys one at a time to get the bitting ? You have cuts 1-5 so 5 keys that wouldn't take long.
Would take 15 minutes to cut the space and depths keys (and I don’t need any more random sets of tools/keys in my van I would use less than once a year lol) but yes depth keys would work.
How does the peps 16 ford escape emergency key operate this 10 space lock . When there is only 7 cuts on it ? And a code for the seven cuts. ? Only. 17:59 17:59
I have the code from the dealership but it doesn’t turn in the door lock, decoded the customer’s key , same cuts but will not work on the door. Using Strattec blanks. ?
@@BoredLockpicker sometimes it has key on the door lock barrel. But not always. So one video will help us a lot. Thanks in advance sir. Hope we get it soon❤️😊
That happens when you are busy, have a lot of work and the idea is not to look fancy, just help people out. Go and find something to do somewhere else, we do not need you here!
Those are fun to take apart... great videos by the way
Definitely easier to just Lishi lol
Great video,i appreciate all your lishi and lock related videos👍helps me a lot now in that line of work
Great to hear!
Great info , thank you for sharing all the way to Ireland
You’re welcome
Thank you for sharing. Had an issue with this type of lock on my vehicle.
You’re welcome
The first time i had to make a key for these (10 or so years ago) i couldn't find how to take the core out. I ended up sliding 2 shims on either side and then cutting my key deeper so the shims pass the wafer. Took nearly an hour, but i got right on the first try.
Nice work on figuring it out! its always super satisfying.
Thanks for doing this video it was interesting to see your process. I have absolutely no experience with car locks, picking them or making keys for them, however I was ask to do just that recently for a family member so I thought I would give it a try. It was a toyota Celica Gen 5 all keys lost and it was located out in the Country so no mobile service. I took a blank key toy 30 with me ( that's all the locksmith had in stock one blank) and had one chance to get it right. I had my hand tool lishi cutter and files. I incorrectly assumed that it would be the same as any other furniture wafer lock. Once I had the lock removed from the car I went about trying to cut the key, however not understanding the lock and how the wafers on each side interacted with the key. Which ones were the top which were the bottom cuts. I was out of my depth having no knowledge. I tried cutting both sides of the key for each wafer at the same time. This turned out to be my mistake. I should have just done one side first then the other. My brain was experiencing brain fog and I couldn't think my way through what I needed to do. I managed to get four of the seven cuts done but didn't want to risk stuffing up the only key, so I aborted cutting the deep cuts as I didn't know which side of the key they interacted with. Yes I learned a lot that day and learning on the go is a great way to figure things out, but I would have loved to have had just a small amount of base knowledge about the lock so that I could have understood what I needed to do. All the years of watching your channel has given me a lot of understandings, but I was all at sea that day,. I ended up getting the code from the side of the lock, had to go to the city and got a locksmith to finish cutting the key. They used the program you used to fill in the missing wafers for the ignition, as I had the door lock and the key was cut on the machine. cheers
At least you tried! If you had instacode you can input the code and actually see a picture of what the cut
Key should look like. Props for trying! And when you learn that way you definitely retain the info better.
@@BoredLockpicker I really do appreciate your support and encouragement. thank you. We don't get much internet access out in the Country and there is no locksmith for 100kms. So I will be doing some residential stuff to help out the locals whenever I am up that way. Just word of mouth jobs, not going to go into business, just keep it casual. I so do enjoy locksmithing and locksport, cheers
Awesome thanks for sharing 👍
You’re welcome
Interesting way to do the retainers. We'd just normally just drill a tiny hole to get leverage.
Never had to use a drill on one of these but I other people have said the same thing
Great video
Thanks man
What products did you use to clean the locks before put lisci in??
Tri-flow
brilliant 😇
thank you!
Thank you
You're welcome
On an oem ford focus door lock it has number on their those do not work for key code?
Not a key code. No key codes on ford locks
Hello, thanks for sharing your knowledge May I ask what’s the name of the software you use to get the codes ?
Either insta code or lock codes. I use them both
@BoredLockpicker from where can I get a subscription of these software's im locksmiths in Australia
Perrylocksmith How did you calibrate your 005 to work with the new M5 key vice , ? Is it a different xHorse app. You have really good videos. Thanks for your hard work. Jim 17:59
Right here (542) Unboxing Setting Up and Testing M5 Clamp on Condor Dolphin 1
th-cam.com/video/DnZnswQvn2k/w-d-xo.html
Me too. Tiny hole, it falls out.
Yep
How many wafers can I find out what the lock has?
Stick a Lishi in and count them
How do I find fill program
Insta code or lock codes
Sam Kinison as a locksmith.
Love Sam kinison
I hope of you can make one for an audi
spending 50-60 dollars on a tool I dont need plus going to the junkyard paying for a lock just for a video...If you want to donate towards the tool there's a link in the description
Instead of removing wafers couldn't you use depth and space keys one at a time to get the bitting ? You have cuts 1-5 so 5 keys that wouldn't take long.
Would take 15 minutes to cut the space and depths keys (and I don’t need any more random sets of tools/keys in my van I would use less than once a year lol) but yes depth keys would work.
Perry Lock smith
How does the peps 16 ford escape emergency key operate this 10 space lock . When there is only 7 cuts on it ? And a code for the seven cuts. ? Only. 17:59 17:59
I have the code from the dealership but it doesn’t turn in the door lock, decoded the customer’s key , same cuts but will not work on the door. Using Strattec blanks. ?
@@jamesperry6536 are you using the dolphin? Only way I've ever got them to work is using universal duplicate
The wafers in an aftermarket lock are not marked.
good info. thanks!
Make a video on Honda sir
Doing what to a Honda? I have Honda Lishi videos. Several of them.
@@BoredLockpicker like this video if no lishi. How to cut key from lock
Oh ok. Honda door locks are pretty easy. I can probably do a video.
@@BoredLockpicker sometimes it has key on the door lock barrel. But not always.
So one video will help us a lot.
Thanks in advance sir. Hope we get it soon❤️😊
Make one ford fusion 101 key
Same lock
its disgusting dirty! coulnd you just clean your workspace before making this video?
No. Any other questions?
That happens when you are busy, have a lot of work and the idea is not to look fancy, just help people out. Go and find something to do somewhere else, we do not need you here!
@@jufegar yes sure, kick me out, live like a pig