did you go through the truck and check all the screws/hardware? I hear a lot of people saying to disassemble and reassemble using loctite where needed. I don't have a Fusion yet but just curious to see if you ran into any issues with loose screws etc.
Both are solid products (and I wonder if they are made in the same factory...). Treal - 62g - $42 Redcat - 144g - $35 I *think the Redcat is total weight vs the Treal single. That would put the Treal at 62x2=124g. Sooo - the Redcat weight more and cost less. Seems like an easy choice!
@@RoadsideRC , Do you think brass wheels, external and internal portal covers, and steering knuckles are too much for just the front? that's around 750g of extra weight to the front. should i lessen the weight or add brass to rear to even it out
@clasherroyale4957 My opinion is to never add weight to the rear - period. There is no need to even it out. I do not recommend adding excessive weight. Just a waste of $$. Start with some of the parts - see what the difference is. Then see if you think you need more.
@@RoadsideRC I’ve been looking at getting one. I’m new to the Hobby and I was also looking at the stance but for my budget the Red Cat comes in at a very good price.
@RoadsideRC thank you very much I got also yd2 and followed your advices did the swap servo and gyro swap and carbon body and all the same alignment you have suggested worked perfectly Next week will install xd10 pro and the brushless 10.5t hobbywing motor 🫶 Is there any maintaince need to be done to this kit ? Diff oil or shock ?
Finally got my Fusion fixed tonight. My 7 year old broke the carbon fiber frame about a week ago. Had it less than 48 hours. 😂😂
Oh my! That must have been quite the hit!
@@RoadsideRC I'm convinced that my son could break an anvil at this point.
did you go through the truck and check all the screws/hardware? I hear a lot of people saying to disassemble and reassemble using loctite where needed. I don't have a Fusion yet but just curious to see if you ran into any issues with loose screws etc.
Nope! No issues.
Redcat suggests checking the pins in the front axles - but otherwise the truck has been solid.
@@RoadsideRC Just the fronts?
Also check all driveshafts. I lost a pin from one of them. Just one wasn't loctite blessed
@@bengonzalez5673 Yes - just the fronts.
Will it Come down to a preference of improvement or looks,we will see!!
I like how these look as well!
Which would you rather have the treal brass covers, or the redcat ones?
Both are solid products (and I wonder if they are made in the same factory...).
Treal - 62g - $42
Redcat - 144g - $35
I *think the Redcat is total weight vs the Treal single. That would put the Treal at 62x2=124g.
Sooo - the Redcat weight more and cost less. Seems like an easy choice!
just curious, would both portal covers (stock 104g and 144g upgrade) fit on the rear axles as well? would you recommend putting brass on both portals?
100% do not recommend putting weight on the rear of a crawler. Keep it all down low - and on the front only. Leave the rear as light as possible!
@@RoadsideRC , Do you think brass wheels, external and internal portal covers, and steering knuckles are too much for just the front? that's around 750g of extra weight to the front. should i lessen the weight or add brass to rear to even it out
@clasherroyale4957 My opinion is to never add weight to the rear - period. There is no need to even it out.
I do not recommend adding excessive weight. Just a waste of $$. Start with some of the parts - see what the difference is. Then see if you think you need more.
Where is the video for the part that you mentioned that it needed for that pin?
I don't have it ready yet.
@@RoadsideRC I’ve been looking at getting one. I’m new to the Hobby and I was also looking at the stance but for my budget the Red Cat comes in at a very good price.
@@Scoot_wyatt_rc Yes! It really is a great value.
@@RoadsideRC I have one in the car A Main Hobbies cuz I got a gift card
Please new update on the yd2z rtr ❤❤
Any changes in alignment since the last video ?)
No changes! The car drives great - so I leave it alone. :)
@RoadsideRC thank you very much I got also yd2 and followed your advices did the swap servo and gyro swap and carbon body and all the same alignment you have suggested worked perfectly
Next week will install xd10 pro and the brushless 10.5t hobbywing motor 🫶
Is there any maintaince need to be done to this kit ? Diff oil or shock ?
@@zixi2067 Great! I am glad it has worked well for you.
I did eventually upgrade the shocks:
th-cam.com/video/_dm5Mnu6PDo/w-d-xo.html
knew this was coming a good upgrade too mate
*🥸fully viewed🤖Au🦘☑thumbs up👍👍*
Thanks 👍