Thanks for sharing this info. A lot of people would just throw the flight controller away and get a new one shipped, but videos like this are a real help to anyone who wants to gain knowledge, save money, and save the earth.
Hello Everyone! Thank you for subscribing to my channel and giving your support and feedback! Here I finally get around to fixing my shorted HappyModel Diamond F4 1S flight controller. Was a bit of a pain to find the short cucuit, but fixing it was fun. I'm going to slap some parts to it once I find a new Pinch camera. Happy Holidays and remember... Enjoy the Breeze...👍🏻🍻👊🏻
I had to go back and re-watch this. I wanted to ask what hot air station you used, but there it was in the video... I added one to my shopping list. I now have 2 HM superbee F4 lite board with ESC3 behaving badly. nothing visibly burned, and the motor does spin, but hiccups a lot and doesnt fly. swapping motors, the fault stays in the same motor position. IMO, one or more pins on the #3 fets has broken loose.
Also, I have a link to my Amazon store in the video description, were all the things I use are in one place to check out. I like the way they have pictures and descriptions too, pretty cool...🍻
@@Mupshot I think, but I'm not sure.. I just like how it's all in one place and I don't have to look for the stuff every time someone asks.. Pretty neat stuff..
That would probably wipe out a few components. I have not worked on an X12.. Diagnostic of the failed components is the most time consuming part, I don't have the right tools for the job nor the funds.. Sorry to hear your X12 got shorted out..😟
I appreciate your encouragement and continued support! I've had such bad luck with nearly new flight controllers going bad, I had to do something.. Happy Holidays to you as well...🍻
You have inspired me to create a store front on Amazon to display everything I use in one place - it's pretty slick. In my "About" tab, I placed a link for my store and have created a tab in there of stuff I use and trust. I plan to add to it in the future. It has the things in it you and others asked about.. Hope ya like it...🍻 *It's affiliate program links.
You have me thinking, I should do a micro soldering video...🤔 I'm just testing gear at the moment and thought I'd share a clip.. I could do a video and list everything...🍻
You have inspired me to create a store front on Amazon to display everything I use in one place - it's pretty slick. In my "About" tab, I placed a link for my store and have created a tab in there of stuff I use and trust. I plan to add to it in the future. It has the things in it you and others asked about.. Hope ya like it...🍻 *It's affiliate program links.
Thanks for sharing this info. A lot of people would just throw the flight controller away and get a new one shipped, but videos like this are a real help to anyone who wants to gain knowledge, save money, and save the earth.
I appreciate your encouragement and support.. I have a few more to hopefully fix...🤞🏻
Hello Everyone! Thank you for subscribing to my channel and giving your support and feedback! Here I finally get around to fixing my shorted HappyModel Diamond F4 1S flight controller. Was a bit of a pain to find the short cucuit, but fixing it was fun. I'm going to slap some parts to it once I find a new Pinch camera. Happy Holidays and remember... Enjoy the Breeze...👍🏻🍻👊🏻
Incredible! You're doing super micro soldering now. Nice man.
I appreciate your support.. With the failure rate of these 1S flight controllers, it's become more of a necessity than anything...🤣
great job fixing and making a video!! so cool to see
I appreciate your support BOG...👍🏻🍻👊🏻
That’s a cool video, I’m looking to get a hot airstation to see if I can repair some fc I got
It's tedious but not too bad. Diagnosis of the issue is the most time consuming part.. It's something to do to save money 4shO...🍻
I had to go back and re-watch this. I wanted to ask what hot air station you used, but there it was in the video... I added one to my shopping list. I now have 2 HM superbee F4 lite board with ESC3 behaving badly. nothing visibly burned, and the motor does spin, but hiccups a lot and doesnt fly. swapping motors, the fault stays in the same motor position. IMO, one or more pins on the #3 fets has broken loose.
Also, I have a link to my Amazon store in the video description, were all the things I use are in one place to check out. I like the way they have pictures and descriptions too, pretty cool...🍻
yep I put the one you listed in my list I assume you get a cut @@PropsOff
@@Mupshot
I think, but I'm not sure.. I just like how it's all in one place and I don't have to look for the stuff every time someone asks.. Pretty neat stuff..
pretty intricate a bit of voice over the Bob Ross of FPV
I really thought about a voice over, debated it 4shO.. I just wanted to do it this way o I guess.. Next time - for you...👍🏻🍻👊🏻
@@PropsOff happy little accidents
@@mfrfpv9079
🤣🤣🌄
Yeah, I believe, finding the faulty components and replacements were a tough job.
Having a schematic would be cool, lol...🍻
Have you ever fix a x12 that the reciever antenna and positive touched? Right now my x12 reciever is dead
That would probably wipe out a few components. I have not worked on an X12.. Diagnostic of the failed components is the most time consuming part, I don't have the right tools for the job nor the funds.. Sorry to hear your X12 got shorted out..😟
nice work! about to swap my 1st esc lol not looking forward to it...
Fixing stuff can be fun... Sometimes...🥵
@@PropsOff only if it's successful
Brilliant work, dude! Nicely done! 😃
But that's the kind of thing I'd never do! 😂
Stay safe there with your family! 🖖😊
And happy holidays!
I appreciate your encouragement and continued support! I've had such bad luck with nearly new flight controllers going bad, I had to do something.. Happy Holidays to you as well...🍻
This is quality with my friend
I appreciate your feedback and support...👍🏻🍻👊🏻
Have you a link or more information for the spare part
I listed it during the video.. You taking about the voltage regulator or microcontroller?
hey this is cool thanks for sharing.
My pleasure, I appreciate your feedback...🍻
Which hot air station are you using
What size nozzle
It's listed in the video. However, enough people have asked, I may do a video on it...🤔
You have inspired me to create a store front on Amazon to display everything I use in one place - it's pretty slick. In my "About" tab, I placed a link for my store and have created a tab in there of stuff I use and trust. I plan to add to it in the future. It has the things in it you and others asked about.. Hope ya like it...🍻
*It's affiliate program links.
I see you have a hot air station, microscope setup. Care to do a video review on that? Source for the solder and flux paste?
You have me thinking, I should do a micro soldering video...🤔 I'm just testing gear at the moment and thought I'd share a clip.. I could do a video and list everything...🍻
You have inspired me to create a store front on Amazon to display everything I use in one place - it's pretty slick. In my "About" tab, I placed a link for my store and have created a tab in there of stuff I use and trust. I plan to add to it in the future. It has the things in it you and others asked about.. Hope ya like it...🍻
*It's affiliate program links.
Just a little bit of flux.
🤏🏻...🤣