Hello... I installed Aftermarket speakers as an upgrade to my non JBL system (2021Rav4)... Will your Micro amplifier work with my new speakers? They are 4 - 6.5 in Infinity Reference (door panels) and 2 - 3.5 infinity reference in the dash board. Thanks in advance for your response.
Wow, some how amplifier works even without connecting to speakers? You only showed the one connector you swapped behind the radio, but speaker connector is not touched at all(The 10 Pin connector that is supposed to be swapped). Is it some kind of magic?
@@BeatSonicUS Please refer to the diagram on your website. You need to remove the speaker wire connector from socket behind the radio, and swap it with highlevel input wiring from the amp. Then Amp speaker output should be connected to original speaker harness that is going to factory speakers. You didn't do any of that. You just folded the cables and put it behind the radio. Ofcourse speaker will still work, because you never put the amp between Factory radio and speakers. It works and sounds like exactly OEM, because OEM/Factory radio is powering the speakers, not your amp. May be its mistake in your video, and you might have fixed it later. But you should show correct/proper installation atleast later.
@@pbear216 I guess you didn't even bother to read all the replies by many people who know about how to install audio. I have installed many audio systems, I know what I am talking about. Who are you and what is that offended you in my comment? Or is because you did not understand you are offended someway?
@@chinnana583 tagged the wrong person, it was directed at the person that posted the stupid video. It is a good thing that he didn't connect it anyway as it would probably blow the factory speakers as they aren't rated for more power than the factory head unit puts out.
Can you please identify which wire in the harness is the 12v remote signal wire (that I can splice into) so I can add a powered subwoofer? For the Toyota Rav4 with JBL.
Where the device gets the power from is different. PA2T3 will be replacing the PA2T2 once we exhaust the stock on the PA2T2 as all the PA2T2 compatible vehicles is compatible with PA2T3 vehicles.
Is there a real point to this unless speakers are replaced along with it? Just sliding the amp back inside the dash with one piece of tape seems hackish.
You can install this on a JBL model and there will be some improvement, not as much of a big improvement from going from non-JBL though. Would love to see you give it a try
@@BeatSonicUS I’m just wondering if it would send power to all speakers as the JBL had additional speakers and Sub. Also, did you do this install properly? It appears you plugged the speaker connectors into themselves rather than in between the speakers harness on the unit.
Does this work for a 2020 Camry SE HYbrid with the 8 in cd slotted radio?? If soo please let me know. I dont have the JBL system and the stock has very muddy bass... its terrible.
You are correct. The installation was not correct in the video. I ordered a PA2T2 sku 4944799040075 for my 2022 RAV4 Prime XSE with 6 speaker system. I just finished installing per the included directions connecting correctly through the factory speaker connectors. Wow what a difference this micro amp makes! Much better bass and highs. Well worth the price! 👍🏼👍🏼
The JBL Club 6520 are higher rated 100w rms speakers. Although our amplifier will improve your sound, the difference won’t be as much compared to using the factory speakers
from the few reviews that I've seen, it looks like the biggest difference you will see is upgrading the tweeters, the speakers from the doors don't make a huge difference
That's definitely a nice upgrade and fairly simple to install. I wish you would put a current price when making these videos. Also still waiting for the Android auto Wireless. I don't know or understand why they can't just put one of those Wireless dongles on the end of the USB cable and hide it somewhere convenient in the dash to make it Wireless? Pretty cool little amp there though that's for sure. Too bad you don't have one for the earlier models.
Hi, The screen beam mini 2 is all sold out everywhere. Do you have another device that I can buy to hookup that doesnt need a hotspot... I have an android phone.
Hello, I have a question, RAV4 Stereo does not have an AUX input, I saw your micro amp has RCA AUX INPUT SO, may I use that to give AUX input to connect a DAC to my sound? If I connect my DAC to the AUX in your micro amp does it sound in my RAV4 Speakers or what?
@@BeatSonicUS the stereo mut be turn on? can you make a video for that I guess there are a lot of people asking the same, now that the DACs are so popular, for better reference the DAC is FiiO BTR7
Is this a joke? The only connection to the car wiring is 12V, AC and ground. NO CONNECTIONS TO SPEAKERS. So what exactly are you trying to make people believe this does?
This installation didn’t make any sense at all. You didn’t do anything with the speaker wires. You basically just connected the inputs and outputs together then connected power to the unit. That poor guy at the end 40% better 🤣
@@tigermarcel1997 So they didn’t even install it correctly by connecting the speaker inputs and outputs, had the owner listen to it, tell you it’s 40% better (even though it’s exactly the same as stock) in an attempt to sell you a nearly $300 product, but I’m the dumb one? 🤣
@@johnk78 You are right in that he did Not show installing a second connector for the speakers(right next to the first connector for power&ground. Or, there is no second connector in the box and the kit does not amplify anything(because its never fully hooked up).
Does this company pay so little attention that they won’t even update video that shows an improper installation? Why would I have these people my money?
Hello... I installed Aftermarket speakers as an upgrade to my non JBL system (2021Rav4)... Will your Micro amplifier work with my new speakers? They are 4 - 6.5 in Infinity Reference (door panels) and 2 - 3.5 infinity reference in the dash board.
Thanks in advance for your response.
Yes our amp will also work with your infinity reference speakers
Those infinities sound sweet! Just picked some up on Black Friday.
Wow, some how amplifier works even without connecting to speakers? You only showed the one connector you swapped behind the radio, but speaker connector is not touched at all(The 10 Pin connector that is supposed to be swapped). Is it some kind of magic?
It’s using the speaker output line from behind the radio.
@@BeatSonicUS Please refer to the diagram on your website. You need to remove the speaker wire connector from socket behind the radio, and swap it with highlevel input wiring from the amp. Then Amp speaker output should be connected to original speaker harness that is going to factory speakers. You didn't do any of that. You just folded the cables and put it behind the radio. Ofcourse speaker will still work, because you never put the amp between Factory radio and speakers. It works and sounds like exactly OEM, because OEM/Factory radio is powering the speakers, not your amp. May be its mistake in your video, and you might have fixed it later. But you should show correct/proper installation atleast later.
@Beat-Sonic you're a dumbass
@@pbear216 I guess you didn't even bother to read all the replies by many people who know about how to install audio. I have installed many audio systems, I know what I am talking about. Who are you and what is that offended you in my comment? Or is because you did not understand you are offended someway?
@@chinnana583 tagged the wrong person, it was directed at the person that posted the stupid video. It is a good thing that he didn't connect it anyway as it would probably blow the factory speakers as they aren't rated for more power than the factory head unit puts out.
Good but most of good speakers have 100w RMS... so this little thing will not work..where u have only 35w per channel
For best performance use factory speakers or mildly upgraded speakers
Kicker csc series are low rms probable would be a great upgrade in addition to this.
Can you please identify which wire in the harness is the 12v remote signal wire (that I can splice into) so I can add a powered subwoofer? For the Toyota Rav4 with JBL.
We can help. Please email us with your order number to info@beatsonicusa.com
What’s the difference between PA2T2 and PA2T3? Thanks
Where the device gets the power from is different. PA2T3 will be replacing the PA2T2 once we exhaust the stock on the PA2T2 as all the PA2T2 compatible vehicles is compatible with PA2T3 vehicles.
@@BeatSonicUS ok thanks
Good video and seems like an easy DIY mod anyone can do. Can this be added to JBL equipped Rav4? Or is there a different version for JBL system?
This solution is compatible with JBL equipped models, however the improvement compared to the oem system without JBL won’t be as significant
you got a buyer if you can add RCA outputs and a 12v Remote signal wire. Almost bought it for my 2024 Camry.
Check back in 2024 Summer
@@BeatSonicUSupdate?
Hey.
Do it works whit european corolla
Whit DCM ecall SOS speaker in dashboard. ??
Yes it should work
Hi! i buy one but the harness that send me is not for toyota, what can i do?
Please email us and we can help info@beatsonicusa.com
Are all the wiring harnesses included?? 2020 RV4 TRD
Yes all the wiring harnesses are included
2023 RAV4 and other Toyotas got their infotainment system upgraded will this still work with them?
Yes the PA2T3K is compatible with the 2023 RAV4. Product link www.beatsonicusa.com/pa2t3k.html
when are you gonna release an amp for 2021 rav4 with an rca output, thanks.
Summer of 2024
Hello I bought Sonic PA2 but It didn't come with the right wiring for my RAV4 2020, where can I get those wiring please!?
Please email us and we can help info@beatsonicusa.com
Is there a real point to this unless speakers are replaced along with it? Just sliding the amp back inside the dash with one piece of tape seems hackish.
Try it to be a believer, you’ll be surprised at how much difference it makes
The amplifier is better than JBL sound ??
It definitely sounds more dynamic and clear than the factory JBL
Hello can I connect the micro power amplifier if I have installed Beat-Sonic TIF-02 Smartphone Mirroring Kit
Yes you can daisy chain them together
Can you do in Camry 2023 ?
Yes, same kit is compatible with 2023 Camry
Do you have anything for 2018 Rav4 sport utility non JBL???
We sure do! www.beatsonicusa.com/ena-2t1-698.html
Is it compatible with 2024 rav4 xle? Where can I place an order?
It is compatible and you can purchase here www.beatsonicusa.com/ena-2t3.html
Can you still install an all in one powered subwoofer after installing this?
Yes you can using a separate line converter
Is there an option to ad this to the JBL models as well? I feel even the JBL models need more power. If so, I would love to do a video on it.
You can install this on a JBL model and there will be some improvement, not as much of a big improvement from going from non-JBL though. Would love to see you give it a try
@@BeatSonicUS I’m just wondering if it would send power to all speakers as the JBL had additional speakers and Sub. Also, did you do this install properly? It appears you plugged the speaker connectors into themselves rather than in between the speakers harness on the unit.
Does this work for a 2020 Camry SE HYbrid with the 8 in cd slotted radio?? If soo please let me know. I dont have the JBL system and the stock has very muddy bass... its terrible.
Yes the PA2T2 is compatible with your 2020 Camry. You will love the new sound after installing this!
Do you have for 2020 camry hybrid
Yes we do! Here’s the link www.beatsonicusa.com/ena-2t3.html
I have a 2022 RAV4 Prime XSE with 6 speaker system. Will this work on my vehicle?
Yes
You are correct. The installation was not correct in the video. I ordered a PA2T2 sku 4944799040075 for my 2022 RAV4 Prime XSE with 6 speaker system. I just finished installing per the included directions connecting correctly through the factory speaker connectors. Wow what a difference this micro amp makes! Much better bass and highs. Well worth the price! 👍🏼👍🏼
Hi, I replaced two front door manufactory speakers with JBL CLUB 6520. Does this amplifier have enough wattage output to make a difference?
The JBL Club 6520 are higher rated 100w rms speakers. Although our amplifier will improve your sound, the difference won’t be as much compared to using the factory speakers
from the few reviews that I've seen, it looks like the biggest difference you will see is upgrading the tweeters, the speakers from the doors don't make a huge difference
The RCA connections are both inputs, right? I wish the unit provided an output to run signal to an aftermarket bass speaker and amp.
Will be releasing one with rca outputs to run aftermarket woofers and amp
That's definitely a nice upgrade and fairly simple to install. I wish you would put a current price when making these videos. Also still waiting for the Android auto Wireless. I don't know or understand why they can't just put one of those Wireless dongles on the end of the USB cable and hide it somewhere convenient in the dash to make it Wireless? Pretty cool little amp there though that's for sure. Too bad you don't have one for the earlier models.
Thank you!
Hello there.. where can i ordered one for me i have toyota rav4 2021 xle non jbl.. thanks and more power
$299
Hi,
The screen beam mini 2 is all sold out everywhere. Do you have another device that I can buy to hookup that doesnt need a hotspot... I have an android phone.
We recommend the screen beam but the others should also work
can install 2023 6 speaker stereo system
We will release a new part number for the 2023 models
when ? its ready ? please let us know
I like can I get one for 2018 RAV4? Eric
Absolutely. Here’s the product link www.beatsonicusa.com/pa2t1.html
Hello , is that amplifier will work for 2011 corolla Toyota
Yes this is compatible with 2011 Corolla without JBL. Product link www.beatsonicusa.com/
How can I buy one please
You can buy it here www.beatsonicusa.com/pa2t3k.html
Do you have it for the 2022 highlander
Yes here you go www.beatsonicusa.com/pa2t2.html
I’m interested to this amp, how can i get/buy this any link please.. tia
Here you go www.beatsonicusa.com/pa2t2.html
Hello, I have a question, RAV4 Stereo does not have an AUX input, I saw your micro amp has RCA AUX INPUT SO, may I use that to give AUX input to connect a DAC to my sound? If I connect my DAC to the AUX in your micro amp does it sound in my RAV4 Speakers or what?
Yes you can add a media device via rca to our amp and it will sound
@@BeatSonicUS the stereo mut be turn on? can you make a video for that I guess there are a lot of people asking the same, now that the DACs are so popular, for better reference the DAC is FiiO BTR7
Anything for 2015 models ?
This one is compatible with 2015 RAV4 without JBL www.beatsonicusa.com/pa2t1.html
Will this work on a 2017is200t non ML ?
It needs to be non ML and non Nav
This would be amazinggg if the RCAs were outputs.
That’s our next product. Releasing middle of next year
Do you have the screen mirror kit for Lexus NX 300 2018 ?
Unfortunately we don’t
Will it work on 2017 rav4.
Yes!
Will this work on 2022 corolla hatchback?
Yes this is compatible with the 2022 Corolla hatchback!
I just installed this on my rav4 and it has a turn on and turn off pop. Any ideas what to do?
Please email us for tech support info@beatsonicusa.com
check that ground wire , it looks kinked
Thanks for the heads up!
Is this a joke? The only connection to the car wiring is 12V, AC and ground. NO CONNECTIONS TO SPEAKERS. So what exactly are you trying to make people believe this does?
A bad joke if any. Check out our newer videos!
This installation didn’t make any sense at all. You didn’t do anything with the speaker wires. You basically just connected the inputs and outputs together then connected power to the unit. That poor guy at the end 40% better 🤣
It actually made a big difference as we have been testing it with more vehicles. More videos to come!
@@BeatSonicUS But how? It wasn’t even installed correctly in this video.
you are dumb........... it's an amplifier ......
@@tigermarcel1997 So they didn’t even install it correctly by connecting the speaker inputs and outputs, had the owner listen to it, tell you it’s 40% better (even though it’s exactly the same as stock) in an attempt to sell you a nearly $300 product, but I’m the dumb one? 🤣
@@johnk78 You are right in that he did Not show installing a second connector for the speakers(right next to the first connector for power&ground.
Or, there is no second connector in the box and the kit does not amplify anything(because its never fully hooked up).
Does this company pay so little attention that they won’t even update video that shows an improper installation? Why would I have these people my money?
Sorry, not sure I follow. Care to explain?
@@BeatSonicUS the install is badly wrong/incomplete. iT never shows the speaker wires getting attached.
Great way to destroy your factory speakers!
Negative. Over 2,000 users and 0 destroyed factory speakers.