Rockford Fosgate Time lapse install in a Chrysler
ฝัง
- เผยแพร่เมื่อ 28 ก.ค. 2024
- We are trying something new for you guys to see if it is something you want to watch. This is a resent install we did in a 300 with some Rockford gear. If you like it let us know and we will do more. Thank you for watching!
- ยานยนต์และพาหนะ
Super clean install! Looks like you guys set the standard!
Thank you Rod, we try
Far from it. They didnt put the fuse inline from the battery to the amps like they're supposed to and only used one fuse for the power going into the battery not out which is back asswards. If you want to learn how to properly install stereo systems watch Steve Meade
@@GR3YS0RG4N1CS get some glasses, yes they did
@@Deke1 you get some glasses there is no fuse between the battery and the amps
@@Deke1 they used one fuse going into the battery. They aren't supposed to do that they're supposed to put a fuse close to the battery on each positive cable going to an amp which they didn't do.
Love how neat and clean you run the wires. Very professional. Nice job
Not sure how I missed this one, very cool time-lapse! That wiring is SO clean, great job
BigDWiz big thanks👍🏻
@@FiveStarCarStereoInc when running a second battery do you ground the amps to the battery or do u ground the battery and amps to there own ground
@@stevenyoung3759 Separate grounds for every equipment !!!
That amp rack was so clean the time lapse was cool. Great job as usual ✌️
JustEnufCustoms thank you
You guys rock!! Wish you were closer to me I would have you set up my 300. Keep up all the good work ur attention to detail is appreciated.
Very nice amp/battery install option! you guys make it look easy with this time lapse but we all know it takes hours for such a clean well done setup
William Grundemann thank you, yes it does
Looks good! Very clean and professional. You guys must really love what you do. Thanks for the video!
I made my way to your shop today got a quote to get some work done can’t wait
Did you follow thru? And how did it turn out
That amp board work was absolute perfection.
Thank you
like how neat and clean the amp rack wiring came out.
I really enjoyed watching you guys install that audio, even in time lapse. Y’all take a lot of pride in what you do. I can tell by your work! Major integrity !!! If y’all were in Texas I’d definitely let you install my music ! Keep up the great work!!!
the work you do looks great, gj keep it up we need more people like you around
I like how clean and tidy all the wires were installed.
waaaaay clean fellas much respect
a demo of the finished product would've been nice.
Lawrence V. Athill at the end of the video we do shake the camera a bit. I'm not really a fan of fart noise TH-cam videos.
fart noise is a slang term for the camera mics being nothing but straight distortion
that wiring is clean! respect for putting effort and time on the install.
Love your work. I was expecting the owner to turn the sound up and see all the windows blow out! LOL
nchia thank you
Ridiculously clean guys. Standard exceeded.
Thank you.
great video - I love watching installs.
Thank you for watching!
Some of the cleanest work I've seen!!
budman7 thank you.
You guys put every other shop I've seen to shame.
@ekim andersom lol simplicity is in my city
This is the most professional Job i`ve ever seen!! Really amazing, i wish you were in Mexico
Salomon Lopez Romero thank you very much
Very clean install and I truly love the amp rack super dope. ✌️️
JustEnufCustoms thank you!
Five Star Car Stereo i want to replace the speakers in a chrsyler 300 2007 base model no navigation no bose or anything of that it just has plain card board speakers i wanna put 4 tx69 6x9s by skar audio for the front doors and the ones that go in the back lid would these fit i need to know before i buy them and they dont end up fitting
Would love to see you guys do a up to date Chrysler 300
Very clean installation work guys great job keep up the good work i love what you guys are doing you have teach me alot.
Your wiring is the best!! I always look for your video/instagram posts to see the way you guys do wiring lol
Thank you very much.
Zip Ties Perfectly Spaced! I love it! Great Time Lapse!
Elliott Exclusive - Car Audio thanks
Great job on the simple set up guys keep up the good work !!!
junito413baby thank you
first vid I watched of you guys and wow nice install. Rockford was my first kick at car audio and still my favorite
fat catt 39 very cool, that you for watching!
Great install love how neat and clean it is!!
Thank you, me too
Nice finishing & clean work 👌
thats badass! looks so clean. im slowing buying my system. so i can install it all at ones. i have a couple RF power amps. with the new RF power swallows. and some component speakers. going in to a mega ram. but this install is sweet! good job
Juan manuel V thank you very much. Let us know how it turns out.
Superb install. Great job!
Jeremy DeMoura thank you!
Damn good work clean install
I'm going with this exact punch setup in a 2012 camry. Except I'm keeping the factory radio and using an lc2i.
Which brand of plastic bezel did you use to go from the factory head unit to the aftermarket one? It fits well.
What model pac did you install along with the pioneer head unit in the 300?
Wow amazing clean set up! Nice job!
victorakagoofy thank you very much
I'd like to know what speakers went in the back deck. My charger has 6x9 stock. The ones in the video look like 8" speakers.
So what do I need to install a aftermarket double din and for two amps on a 06 Chrysler 300c with Boston premium?
Yall done a real good job.
Xavier McDonald thank you very much
No problem
Very good job!!!....super clean....you guys set the bar very high!
Armando Pena thank you very much.
wish you'll can set up shop in Memphis tn really would appreciate it love the work you do
Chevy Fan thanks you
Awesome video. Clean asf install. Good stuff man. That amp rack looked perfect
Trapperjohn1000 thank you,👍
On my 2012 Chrysler 200 when I try to install the power wire to the battery the lights will flicker when the car is on or off and also if it’s running sometimes it will shut it off... why? I’ve installed many systems never having this issue and the battery is located on the drivers side quarter panel
wow, that was one clean install love the wiring
300C 5.7 CB thank you very much
Hi,if I want to make the combo wires or harness to run my wires together,what size to Flexo PET is better
Nice clean setup 👍🏽
I have just installed my sound system in my car but it makes a noise with the amp on and no music playing. My wires run along the sides of the car. And are seperated. What could be causing the noise thanks j
At what point do you run new wiring from the highs/mids amp to the door speakers vs. Amplifying through the stock wiring... (like upgrading the stock amp for aftermarket)
Flawless as always
Love these time laps videos!!
ike suderman thank you
Well I just found this video guys yeowww can y’all tell me what 6x9 you guys used in doors and rear deck please and what you ran in the from dash part? Is it better to use tweeter or should I use 3.5 inch two way speakers
how is the staging with the components in the doors and tweeters in the dash?
What wiring harness did you guys use I have an 06 Chrysler 300 limited and I am having troubles finding the correct wiring harness to use any info would be great thanks
What's the best method of attaching the Power and Ground wires to the Rockford Fosgate amps.... (Square terminal area which clamps wire by tightening Phillips head screws)
Wire Ferrals ?
Bare Wire ?
i work in audio and ive seen some clean ass installs, but this has to be the cleanest install ive ever seen. great job
+Misael Cartagena thank you very much, to kind
Very nice guys. This is why i really would love for you to install my upgrade system.
great install especially on that car! the only thing I like about Mopar is the battery being housed in the trunk.
Is it good to have jacks in both ports on the amps i have a Rockford farsgate1500 × 1 an a 1200 x 4
Running 3 amplifiers in my Chrysler 300 and 4 batteries with the stock battery about how much power and ground wire would I need including the big 3 upgrade
How do you isolate the batteries from each other? What product or method do you use?
how did you mount amp board to the car?
Beautiful work!
Joe Hoyle thank you
Those Punch amps and the C.LE.A.N system is boss . Love my 300X2
Usually don't care for speaker installs because so many shops do shitty jobs, but you guys were very neat and fast based on the video.
Stepheon Coles haha thank you, glad you liked it.
What was the blue box you hooked up to the head unit
First of all, great install guys. I have a question about my future install in my 2013 Chrysler 300C. I'm going to install an Audiocontrol LCQ-1 as my interface after my factory amplifier. I've located the factory amp under the driver's dash. I am looking for a good wiring diagram for this amp as I would prefer an actual remote turn on wire, with a relay if needed, as opposed to the "great turn on feature" of the Audiocontrol unit. And knowing the speaker wires in advance would greatly help as well. Vehicle has the Alpine 6 speaker system with no sub. Thanks in advance
What speakers were used in this install?
Where do you guys order your wire from speaker power etc?
Amazingly clean install
very clean professionally done
could this be done on a 2018 ?
When I set gains on my customer's amps. I crank all the settings up all the radio. Then set it with the DD1+ then put everything back on a flat. I've had many people crank up the settings on radio and blow stuff up. Then come back excepting a free warranty. So I just started turning it up then tune then back it down. Never had a problem unless people crank the gain or bass boost on the amp.
Question? I have the Pioneer AVH5700BH Radio. Do all Pioneer HU's start clipping at the same spot as the one you used in this video with any amp? I'm going to install a MB Quart OA800.4 amp giving about 100watt RMS x 4 @ 4 ohms to 6.5 Polk audio component speakers up front and 6.5 Coaxial to the rear doors.
I know nothing when it comes to car stereo/sound installation etc. question. The small battery is to avoid using car battery? Can this be done for any sound installation? I have a Rockford Fosgate p300.
Did you guys end up removing the truck deck lid cover i feel like it blocks alot of bass from getting to the interior on 2016 charger scat pack thinking about removing it
2016 Chrysler 300 battery has current temperature sensor can I ground off of it or no ? Thanks in advance
Is Rockford the only amp you can set without SMD-DD1 or other testers?
Did you guys run new wire for the speakers to the 4 channel ?
Nice amp rack setup very clean and compact! But a demo of the finished product would have been 👍🏻
Hey guys great clean setup!
I too have a Chrysler 300 with a Rockford setup. I would love for you guys to make me an amp rack and clean up my wires.
KB TopShotta thank you
I’ve been trying to find out how to install the big 3 on my Chrysler 300 touring 2006. I’m only confused since my alternator wire goes into the engine. How much would you charge to install it for me?
Where did u put the ground wire on this car
How big were the subs and what kind it got wavy fast.
How do u guys set the punch eq
What size fuse are you guys using from the secondary battery to the main. Did you guys not fuse the wire where the secondary battery goes into the amp also?. I’m planning to install the same setup but instead using a P600x4 instead.
I need some assistaance
. I have a skar rp150.4 4 channel amp and need to hook up six speakers. I have 4 cerwin vegas for ch. 1&2 and 2 mtx mids for channels 3&4. Thats how I was told to hook up? I could use some advice serial or paralell? I have the 1500 watt for my rockford fosgates which is an easy hookup. Please help if you can.
Tech is cool and all (clip detect) but do you find your self using your senses, or just set it and forget it
Do you guys use speed wire for the door speakers? I am getting ready to do a full install and speed wire looks so much easier but can’t find anything on people using it instead of running speaker wire to each speaker..
super clean install
Did you run power to/from the front or just to the trunk battery? Planning on running 2k watts in one of these cars, 1500 bass and 500 mids and highs, also plan to do big three, anything else I should be doing to run that much power?
Qual é a marca dos cabos que você usou ?
I have a 2015 challenger I want to install a aftermarket radio what I need?
you guys do very good work ....
RAIDERS RODRIGUEZ thank you
What size mids did you install?
How do you get 2 15's in a 06 charger without building a box?...
Love time lapse videos.
Awesome, clean work. Was hoping to see the sub though.
Fantastic job guys.
Robert Skelley thank you
Five Star Car Stereo You're one of the very few shops I'd trust to install a system for me or a friend, that is, if I didn't prefer to install myself. Your videos are very informative and have helped me with professional, clean installs 👍🏻👍🏻