ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
ต่อไป
เล่นอัตโนมัติ
2 Stroke Carburetor - In depth Fault Finding, Testing, Service & RepairVintage Engine Repairs
มุมมอง 562K
Walbro HDC Carburetor...EASY Check Valve Test!Leon's Chainsaw Parts & Repair
มุมมอง 19K
Rotary Valves Make Normal Valves Look Silly - Why Aren't We Using Them?driving 4 answers
มุมมอง 2M
7 Days Stranded In A CaveMrBeast
มุมมอง 59M
ลุงตู่มาเหนือเมฆจริงๆทักษิณติดกับดักรัฐธรรมนญปี60แล้วจ่อโดนยุบพรรคอีกมอเตอร์ไซค์ อินดี้
มุมมอง 140K
ครัวไรอ่ะ! EP.191 : สลัดโรล เสี่ยงดวงohana clip
มุมมอง 474K
2-Stroke Carburetor Diaphragms Different Colours. This is why!TheRepairSpecialist
มุมมอง 60K
Onan carburetor and fuel system tips and tricksCranky MotorSports
มุมมอง 67K
FRUSTRATING Service Of A Zama M1 Carburetor For McCulloch 110!Leon's Chainsaw Parts & Repair
มุมมอง 13K
carburetor pressure testingJoe Pace
มุมมอง 131K
ZAMA OR WALBRO CARBURETOR WONT PRIME? THEN YOU NEED TO WATCH THIS!!THEMOWERMEDIC1
มุมมอง 82K
A Carburetor Fix Many Mechanics Don’t Know!Vintage Engine Repairs
มุมมอง 176K
How a 2 Stroke Carburetor Works, Fuel Pump & MeteringJay Gould
มุมมอง 282K
Power Valves Explained: How they work, how to tuneMuscle Car Solutions
มุมมอง 112K
I Rebuilt My Carburetor And My Chainsaw Still Won't Run! What Do I Do Now?Leon's Chainsaw Parts & Repair
มุมมอง 39K
БЕРЕЗОВЫЙ СОК В СОЛО⚡️КАН АНДРЕЙ⚡️
มุมมอง 7M
【斗罗大陆】果果这些食材不能浪费,唐舞桐姐妹俩拿来煮面吧! #斗罗大陆#唐舞桐#唐老六萌萌与舞桐
มุมมอง 3.1M
เปิดโผ ครม. ใหม่ | เนชั่นสุดสัปดาห์ กับ 3 บก. | NationTV22NationTV
มุมมอง 432K
ไฮไลท์ฟุตบอลพรีเมียร์ลีก 2024/25 สัปดาห์ที่ 1 : อิปสวิช ทาวน์ พบ ลิเวอร์พูลTrueVisionsOfficial
มุมมอง 1.3M
ONE ลุมพินี 75 Full Fight | 16 ส.ค. 2567 | Ch7HDterodigital
มุมมอง 620K
Logo Matching Challenge with Alfredo Larin Family! 👍BigSchool
มุมมอง 15M
Thanks so much for this, Warren! The whole deal with checkvalves has been a question mark in the back of my mind for a while now, but this really explains it well and showed me how to confirm one way or the other whether they’re the issue with a carb. Good job, buddy! 👍
Always great to see you again. I remember a video where you didn’t drive it out. I’ve been practicing testing before dismantling the carb. Thanks.
I did landscaping 30 years. I tip my hat to you sir.🎩 You are a natural teacher and your experience shines. Thank you.
Thank you! And thanks for watching
Hey, Warren, it’s 2 months later and I’ve been experimenting with a C1U carb I got in a box of free parts from a customer. I followed your instructions at 5:35 to drive the brass check valve out and test it. I had to remove the choke plate and rod first so I could get the check valve out. The valve tested fine. I went one step further by removing the adjustment needle that feeds that check valve and ran a 9 gauge guitar wire through the orifice all the way into where the check valve seats. Got it all back together successfully.
Thanks for one more piece of the carburetor puzzle learned! 👍🔧
Great stuff as always!
Fantastic content ! Thanks again.
Keep up the good work. I am learning a lot, thanks.
Thank you for revealing one of the mysteries of a successful 2 stroke carb rebuild
Thanks for the info
great video with lots of check valve examples and a rare video on main jet removal. thanks! here my tip, check valves can be removed by prying them out with select sized drill bit bottoms. then cleaning that passage is easier and with inspection and careful placement of the diaphram disc, and pressing the brass piece back in one can get good results.
Great advice
Thank You for information and video
More people need to see this video before working on any carb
Very good information my good man! I have at least a hundred of those carburators in a box, And I have a vintage chainsaw collection of at least 60saws! So I had to learn everything I could about them. But that frickin check valve had me stumped when I first started working on stuff I remember hearing some ol boy that owned a small engine equipment repair shop in Greensboro Kentucky say that the check valve was made out of Neprene like they use for fishing waders. I don't think most people know what they are doing with these carburators and they don't realize it when they pull the fuel lines off and don't remember which fuel barb that they go back on! But there are two styles of the priming system for these carburators, one is a purge ball and one is a primer ball! And the one that is separated from the carburetor and is clipped into the side body panel draws the fuel backwards from the fuel tank, into what would normally be the outlet on most carburators, And out what is normally the inlet and into the shorter fuel barb marked in on the reverse side of the primer bulb and out the longer fuel barb and then back into the fuel tank! When you pump the bulb.I take it that carburator body does not have one of these check valves in order to accomplish this?
Thank you,I have learnt a lot from your video,thanks once again.
No problem. Thanks for watching
Thanks mate
Thank you for sharing your knowledge sir. Greetings from the Netherlands🍻
Wow, what a perfect explanation re: check valves. One question, in your many experiences, what might the symptoms be of check valves that are not working right? Is this one of them ….immediate engine flooding when trying to start? Thank you so much for this video.
Yes, that could be a check valve problem. The minute you tighten down the gas cap, pressure starts to build up inside the gas tank. That pressure will push the gas up the fuel line, through the carb, and into the engine. The machine could be flooded before you even pick it up. If you replace a carburetor, only use the genuine OEM carb or buy an aftermarket carb made by Hipa.
Thank you so much for your prompt reply. That makes complete sense, since after trying to start it and continuing with the repair, removing the gas lines from the carb, gas would flow out of the tank, really bad, until I removed the gas cap. So a new carb is the works. Thanks again!
@@dsnako1 When you’re not using it, set it upright with the gas cap loose. Then right before you try to crank it, tighten the gas cap down. This will prevent it from just sitting there pushing gas into the carb when you’re not using it.
Really enjoyed your well executed tutorial. What are the symptons of a chainsaw with a faulty check valve? Thank you and all the best.
Warren, I appreciate your video which I wish I would have viewed a year ago. I made the mistake thinking that most of the check valves had a metal flap like a car PCV valve. I made the error of trying to clear a clog with a wire brush fiber. The thin wire punctured the rubber-like flap which ruined the valve. I took a fine pick and jewelers screwdriver to remove the Welch plug and see what was inside the valve. I was not sure if spray cleaners would destroy the flap. I would like to know if you or any viewers have had good or bad results running the carbs with check valves in an ultrasonic cleaner.
I'm not joking, I have literally rebuilt probably at least 1,000 carbs in the last 15 years. Sometimes they work, but other times, no matter what you do, can't get them right? It's the tiny check valves that are usually the issue. Hard to blow air through them, cause you can blow the valve right out of them if you use shop air, has to be regulated to like a few psi? Most mechanics think they can work on a simple little carb, until they can't even put the damn thing back together? It takes experience and a lot of patience, believe me?
What do you use to clean the internals of the carb out? I would use brake cleaner and blow them out with air. Carb cleaner is a no-no with rubber o-rings and gaskets? It will swell them up like twice their original size, and take like 24 hours to shrink back down. You'll learn that the hard way the first time you make that mistake?
Instead of the air pressure, can you check the valves in the primer bulb base by replacing the bulb with a little fluid in it?
With the carburetor fully assembled, you can just hold it in your hand, stuck a piece of fuel line onto the inlet of the carb then stick the other end of that fuel line into the gas tank or a jar of gas and pump it. If the check valves are good it will shoot gas out of the return
Great video. 🎉 Do ultrasound cleaners fix check valves?
If the check valve is stuck open or shut just because it’s dirty or gummed up, an ultrasonic cleaner could get it to work. If the check valve is damaged it wouldn’t help.
Can anyone tell me the typical symptoms of a stuck check valve on a brushcutter , thank you
Won’t prime. Boggs down when you try to throttle up. Flooding. A bad check valve can cause all kids of problems
I see alot of diy folks who destroy the check valves with welding tip cleaner
If it’s plastic peace I install new one but other than that I installed new carb
Do you have the primer base check valve (white plastic piece) that i can buy from you? Zama C1Q-S30C Carb. OR do you have a good Zama C1Q-S30C?
What’s the carburetor on?
@@wcjcnc Stihl BG75 blower.
Sir what's would make a bg56 idle great but when you rev it up it bogs out on the high side. It's not the muffler screen. It there a way to clean the high side circuit?
Could be a stiff metering gasket.
Sir...if you check valve passing, what are the symptoms?
A bad check valve can cause flooding, starting problems, and just running like crap.
Sir..I have a problem WT 1048 carb easy to starter and Idle is good but when I raise the throttle to full, the engine shuts off @@wcjcnc
@@zulkiflykadir8049 Have you done a compression test on it?
The compression test on the carburettor has been done but the result is that the compression decreases little by little within 30 minutes😇😇@@wcjcnc
@@zulkiflykadir8049 There’s no such thing as a compression test on the carburetor. Not sure what you’re talking about. I’m talking about the compression in the cylinder
Folks need to not pick around in carbs and destroy the check valves