In the last few days l have seen two other flat to semi gloss black vehicles with just the right amount of red trim. That combination looks really good. I have a 250 Yamaha that l would like to customize. The more l study it the more lve realized l don't want to make radical changes. The subtle touches on this custom look just about right. Thanks for sharing it with us.
Olá .que moto bonita .a virago na minha opinião ele continua sendo uma das custom mais bonita .que fabricaram até hoje . Meus parabéns sua moto é diferenciado . Nota mil . agora vou lhe fazer uma pergunta .como você conseguiu essa lente da lanterna traseira bem mais curta . também quero para pôr na minha . Aí sim minha moto também ficaria perfeito.abs
skatatzhs mono Τις stock εξατμίσεις τις άλλαξες; Ρωτάω γιατί έχω ένα 400άρι Virago και σκέφτομαι να αλλάξω εξατμίσεις, αλλά δεν μπορώ να βρω κάτι καλό (εργοστασιακό).
Sethuna Το δυομισαρι εχω και ξερω σιγουρα οτι παιρνει motorsport!Κανε μια ερωτηση σε dragon exhaust που μπορει να σου φτιαξει σιγουρα οτι θες!!Κανα 300αρι μου ειχε πει για το δικο μου
the tail light is the original, but i used 2 original lenses, cut them to fit together ( a lot of hours) , painted the back one black so it didn't look like i cut the light . I also had to modify the light inside so it could fit in deeper. a must do mod on this bike because the original is way too long.
the tail light is the original, but i used 2 original lenses, cut them to fit together ( a lot of hours) , painted the back one black so it didn't look like i cut the light . I also had to modify the light inside so it could fit in deeper. a must do mod on this bike because the original stick's out way too long.
I did so much research on so many designs for a V Star 250 bobber! I've been staring for an hour at yours... Jeez, I made my decision what I want now - you put together the best I've ever seen! I'm just wondering where you got that seat from :)... ?
Makes sense, I thought so. How about lowering the fender, is that done with a shorter suspension? Does it not touch the wheel if you ride over a pothole or a bump in the road? Nevertheless, I would buy your bike in a heartbeat if you're selling :)
I did change the rear shocks to lower it to get that look. I only weigh 72 kg so I never had a problem with the tire scraping the fender. I sold the bike years ago unfortunately :)
Originally I had a shorter fender ( if you check my channel you can see how I originally bobbed the bike in another video) but I got tired of all the mud on my back from over spray.
@@dimicustoms Thanks a lot for your responses! I noticed a different version of the bike. Is it ok if I pm you with a few more questions? I really want to bob mine very similar to yours and I need your help to confirm my thoughts on how you did everything. Thank you again!
the chrome bit looks standard, mabe get the metal bit above out of the way, and be able to get smaller red lens on,, have to investigate when have the time, poss tmoro
the tail light is the original, but i used '2' plastic covers, cut them to fit together ( a lot of hours) , painted the back one black so it didn't look like i cut the light . I also had to modify the light inside so it could fit in deeper. a must do mod on this bike because the original is way too long.
Tail light I made using 2 original tail lights, cutting and glueing together to shorten the oversized light...and the seat I custom made using sheet metal on the frame to fit the shape of the frame and added foam from a scooter and did the cover myself as well
tenho uma máquina dessas e queria saber o que posso e o que não posso modificar.. o que a lei permite. Se houver algum vídeo por favor me mandem um link.. Obrigado
The seat I made myself using sheet metal, cutting and forming it to the frame for a nice fit , shaped the foam from another bike and actually made the cover myself with imitation leather and the sowing it myself after watching allot of videos on sowing seats on TH-cam
@@dimicustoms do you sell these? I’d be willing to pay for one if you ship it. It looks awesome and I haven’t been able to find a seat for my virago that I like
i think they call em ''street glide'' .. MUST DO on this bike, changed the handling completely!! it became a different bike, for the better!!! the steering isn't so heavy as before.
Que motoca massa.
Estilosa demais.
A combinação de cores ficou espetacular.
👏🏼👏🏻👏🏽👏🏼👏🏻👏🏽👏🏼👏🏻👏🏽
Que moto linda!!!! Eu já sou apaixonado pela Viraguinho, e a customização ficou show!!
Já estava apaixonado pela virago. Agora, mais ainda. Parabéns. É a mais bonita que já vi.
A Virago mais linda que já vi. Mds, que moto linda!
By far the best I've seen. Great work!
In the last few days l have seen two other flat to semi gloss black vehicles with just the right amount of red trim. That combination looks really good. I have a 250 Yamaha that l would like to customize. The more l study it the more lve realized l don't want to make radical changes. The subtle touches on this custom look just about right. Thanks for sharing it with us.
suuuuuuuper cool what you did with the taillight and the handlebars clean bike
must say very nice custom bike have a 2015 v-star 100% stock lots fo nice ideas from looking at yours THANKS.
Caralho mil vezes kkk ficou pft de mais man parabéns 👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
Muito foda a sua moto!! Me deu boas idéias pra customizar a minha Miraginha!! Parabéns!!!
Simplistically Beautiful...just wow.
Very cool motorcycle, like the oem exhaust 💪
Olá .que moto bonita .a virago na minha opinião ele continua sendo uma das custom mais bonita .que fabricaram até hoje . Meus parabéns sua moto é diferenciado . Nota mil . agora vou lhe fazer uma pergunta .como você conseguiu essa lente da lanterna traseira bem mais curta . também quero para pôr na minha . Aí sim minha moto também ficaria perfeito.abs
Θα συμφωνήσω με τους ξένους... Το ομορφότερο που έχω δει!!!
Εναν ελληνα δεν ειδα στα σχολια ρε φιλε και ανησυχω!Μολις πηρα το 250 και ξεκιναει το project!Συνχαρητηρια εισαι εμπνευση!
skatatzhs mono Επιτέλους ένας Έλληνας στα σχόλια 😛
Ξεκινάς και εσύ project για bobber;
Sethuna ναι αδερφέ και μέχρι στιγμής πάει ωραία!Ίσιο τιμόνι,κομμένα φτερά κλπ
skatatzhs mono Τις stock εξατμίσεις τις άλλαξες; Ρωτάω γιατί έχω ένα 400άρι Virago και σκέφτομαι να αλλάξω εξατμίσεις, αλλά δεν μπορώ να βρω κάτι καλό (εργοστασιακό).
Sethuna Το δυομισαρι εχω και ξερω σιγουρα οτι παιρνει motorsport!Κανε μια ερωτηση σε dragon exhaust που μπορει να σου φτιαξει σιγουρα οτι θες!!Κανα 300αρι μου ειχε πει για το δικο μου
σίγουρα περνει motosport εγω θα βάλω σωλήνες ισιες νικελ στα 170 ευρω
αλλα ο τύπος με την μίζα πως εκανε πατέτα θα ειναι?
I agree the best twofidy rago I have seen customised well done
that is gorgeous
É a mais top que já vi...queria saber desse escape
Chik, parabéns, ficou muito chou
Que coisa mais linda de Deus ahnnnnn......
Looks amazing!
Belissimo projeto !!!
Looks and sounds awesome! I'm also working on a series to turn a Virago 250 into a Bobber!!
PQP que Virago linda !!!! Estou pra levar a minha agora em fevereiro em alguma oficina de Sp Capital pra customizar e já sei como quero ela rsrs
Perfektní moto,super práce ahoj route czech republic
A virago 250 é bonita original, customizada ou bobber. Imbatível
She's a beauty
очень круто выглядит...бомба
A Virago mais bonita que eu já vi
Opa, poderia me informar qual modelo deste farol trazeiro?
the tail light is the original, but i used 2 original lenses, cut them to fit together ( a lot of hours) , painted the back one black so it didn't look like i cut the light . I also had to modify the light inside so it could fit in deeper. a must do mod on this bike because the original is way too long.
super,super,super,tohle se mi líbí............route 66 czech republic
ficou muito gira . Parabéns
Parece uma Drag Star 😮
Ficou espetacular ! Parabéns pelo projeto. O filtro de ar que está usando que filtro é? E que tipo de capa ele usa? Abraço parceiro
Your tail light looks awesome, Where can I buy it via online ?
the tail light is the original, but i used 2 original lenses, cut them to fit together ( a lot of hours) , painted the back one black so it didn't look like i cut the light . I also had to modify the light inside so it could fit in deeper. a must do mod on this bike because the original stick's out way too long.
@@dimicustomsAwesome!! Thank you so much for your sharing, did you make a video of that modification ?
@@mr.terrypotter8850 sorry my friend, did not think of recording the process , it did take many hours to complete
@@dimicustoms No worries, thanks again for your sharing
Que locura!!!!!!!!!!!!
a real beauty love that seat where did you get it
I made the seat using sheet metal in the shape on the frame, found foam from another bike and shaped it and made the leather myself.
Irmao me ajuda por favor tenho uma shineray 250 bolt qual alongamento de bengala serviria nela por favor.
Sabe me dizer o nome do modelo desse farol?
Muito linda e esse ronco achei sensacional, onde comprou o escape?
Abraço!
Nice start but how the hell you put the speedmeter down there like you have to look down there and possibly get in a wreck but looks cool
Usually never look at the speedo, and just a quick glance, mostly look at the km counter to know when I need gas ⛽ , 😜
Q linda moto Mano
Just wondering do you still have this same bike? I'm asking because I recently just bought one just like yours
O cilindro foi pintado?
Beautiful!
Muy bonita la moto.
Maravilha
Top muito linda
Δυνατό φιλε
Qual amortecedor traseiro você usou?
q da hora seu projeto .. parabens.. q manoplas sao essas q vc usou?
Please tell me where you got your tail light and your seat
Fantastic! Excellent customization. Are you with her now?
Bom dia. Muito massa a moto quem fez pra vc. Tem endereço
Ou watts zap. ..valeu 👍
I did so much research on so many designs for a V Star 250 bobber! I've been staring for an hour at yours... Jeez, I made my decision what I want now - you put together the best I've ever seen! I'm just wondering where you got that seat from :)... ?
Actually I made the seat myself from sheet metal to hug the Fender and then I covered with foam and leather
Makes sense, I thought so. How about lowering the fender, is that done with a shorter suspension? Does it not touch the wheel if you ride over a pothole or a bump in the road? Nevertheless, I would buy your bike in a heartbeat if you're selling :)
I did change the rear shocks to lower it to get that look. I only weigh 72 kg so I never had a problem with the tire scraping the fender. I sold the bike years ago unfortunately :)
Originally I had a shorter fender ( if you check my channel you can see how I originally bobbed the bike in another video) but I got tired of all the mud on my back from over spray.
@@dimicustoms Thanks a lot for your responses! I noticed a different version of the bike. Is it ok if I pm you with a few more questions? I really want to bob mine very similar to yours and I need your help to confirm my thoughts on how you did everything. Thank you again!
Amigo onde.comprou estw guidon
hello the black part is paint or wrapping?
linda demais!
Well Done!
カワイイなあ！
Que coisa linda. Vc tem ela ainda ?
O que os choques estão por trás?
Ja teve algum problema com essa placa na lateral?
Fala amigao..qual o modelo dwste guidom?
Linda top demais
Dear Lord please let him change my 250 this way I think I love this bike
What is the seat called? And where did you get it ?
Que Guidon é este?
Onde escondeu os cabos
Keren
what is the size of the handle
εργαλείο απ'τα λίγα
I'd like to know how you got the tail light plastic so close to the base.
Me 2, i really dont like the standard back lite set up, got a nice round "" smaller 1 "" coming in the post any day now
But this looks like oem based tail light with a smaller plastic cover.
the chrome bit looks standard, mabe get the metal bit above out of the way, and be able to get smaller red lens on,, have to investigate when have the time, poss tmoro
the tail light is the original, but i used '2' plastic covers, cut them to fit together ( a lot of hours) , painted the back one black so it didn't look like i cut the light . I also had to modify the light inside so it could fit in deeper. a must do mod on this bike because the original is way too long.
I would love to know where you got your tail light and your seat?
Tail light I made using 2 original tail lights, cutting and glueing together to shorten the oversized light...and the seat I custom made using sheet metal on the frame to fit the shape of the frame and added foam from a scooter and did the cover myself as well
@@dimicustoms wow you do good work
Wow Nice!!!!!!
Já vendeu?
O Sr customiza motos para terceiros? Estou vendo nesse vídeo exatamente a moto dos meus sonhos, se tiver como deixar o contato
tenho uma máquina dessas e queria saber o que posso e o que não posso modificar.. o que a lei permite. Se houver algum vídeo por favor me mandem um link.. Obrigado
Canal motorama, tem um vídeo falando só sobre o que pode na lei ;)
Linda to pensando en comprar uma dessa
Can you upload more video of this bike, please.
Подскажите где такой руль взять
Be nice if the exhaust was black wrapped
What mufflers are those
τι εφτιαξες ρε ψηλε.πολυ δυνατο
Enter the red color code?
Chik, chik d mais
Linda❤
τι είναι αυτό που μοιάζει με τραπουλόχαρτο στο τιμόνι;
Έλα φίλε.. ήταν Zippo αναπτήρας από μια ζώνη που τυχαία βρήκα σε ένα παζάρι
Where did you get the seat
The seat I made myself using sheet metal, cutting and forming it to the frame for a nice fit , shaped the foam from another bike and actually made the cover myself with imitation leather and the sowing it myself after watching allot of videos on sowing seats on TH-cam
@@dimicustoms do you sell these? I’d be willing to pay for one if you ship it. It looks awesome and I haven’t been able to find a seat for my virago that I like
👍👍👍👍
Would like to buy this bike
massa a motoca,mas não é nacional...é da
gringa.
What set of bars are those
i think they call em ''street glide'' .. MUST DO on this bike, changed the handling completely!! it became a different bike, for the better!!! the steering isn't so heavy as before.
Que guidom é esse?
CANAL Na TRiLhA descobriu?
Vanessa Farias e da bros
oi qual o nome do banco
Que guidao é esse?
Vanessa Farias da bros
que guidão e esse
#semogaluanchdiIndonesia
i need that handlebar
I found the bars at a aftermarket shop with custom parts, day with night compared to the factory bars with how the bike handles! A must do !
Boa tarde!
Endereço de vcs.
Greece, Greco