Guys. This is a very cool way. But a very long and complicated process. Measure top x2+2 measure bottom x2+2 go to the corner of your detail and radius both measurements with a pencil. Wrap done
You can also measure the circumference then cut your length apply glue to the stack and set flashing once you wrap it pull it off and you have a layout for your cut , you just cut the clean flashing off and keep your 1.5 for weld no math very little measuring and it's very quick
Please reach out to our experts for assistance. You can call them at -877-423-7663 or email them at designservices@gaf.com, and they will be happy to assist.
Thanks for sharing this. It really is a lost art
Guys. This is a very cool way. But a very long and complicated process. Measure top x2+2 measure bottom x2+2 go to the corner of your detail and radius both measurements with a pencil. Wrap done
Ima try it! I know another way too. Thanks
Post a video showing your method. Kinda confusing the way you got it written down but I'm interested in seeing what you do!
Feel free to reach out to our experts at 1-800-766-3411 with any questions you have!
You can also measure the circumference then cut your length apply glue to the stack and set flashing once you wrap it pull it off and you have a layout for your cut , you just cut the clean flashing off and keep your 1.5 for weld no math very little measuring and it's very quick
target 1/2 inch up the penetration and wrap is 1" on the deck
How do you find your pivot point
Please reach out to our experts for assistance. You can call them at -877-423-7663 or email them at designservices@gaf.com, and they will be happy to assist.
You carry the line off of your 2 points up to the center line
Lost art because company looses money takes too long to measure and map out and the belt loops forget about it ...