Hey everyone)) These presets is just mindblowing... The exact firm Mushrooms sound. Just imagine guys how long we was awaiting for this moment! Billion thanks and great hug Erez!!! Up the Mushrooms! 🍄🍄🍄🍄🍄
Very very nice. Thanks for the inspiration and the presets :) To set up Filterverse as oscillator do the following: - Add an Oscillator as modulator - Open it's Audio output - Insert an Envelope - Right click on the top right of the Oscillator modulator and increase X-Mod from the Envelope to the max - Enjoy :) How to get midi data to the plugin depends on your DAW but shouldn't be hard to find out. The Google knows ;)
But since you can't opem Filterverse as an instrument and only as an effect - how do you set it up to begin with? If you open it as an effect on a source plugin what do you do with that plugin's sound?
@@bateimidrashnetwork Sorry maybe I misunderstood. But as I mentioned before you have to figure it out by yourself. I don't even know what kind of software you are using, and even if I would have to google it as well if it's not Bitwig you're using. Good luck :)
Haven’t been able up till now to properly set it up as a synth in cubase. Is there a tutorial somewhere? Ps i see the earlier comment now. I’ll just sit and wait
Thamks! Joining the request for a tutorial how to set this up in cubase. Since you can't load Filterverse as an Instrument but only as an effect you add to another plugin i'm not sure what happens to the source sound, how you only hear filterverse and of course how to do all the rest of the routing to make it work properly. Thanks!
Hello Erez and Polyverse team. Would you be so kind as to share how to Set up Filterverse in Cubase correctly for using as a synth, you guys responded in comments under previous stream video`s that will highlight this. So, please… )))) Specifically, I am unable to play notes with proper sound termination, which significantly impacts Filterverse usability. When I using Filterverse with a single oscillator, the sound continues indefinitely after pressing a key on my MIDI keyboard. The tone changes only when another note is pressed, but sound again does not stop. Maybe it is somehow relates to some Midi settings in Cubase or any other. I followed the standard setup in Cubase: Created an audio track with Filterverse loaded as an insert. Added a MIDI track with its output routed to Filterverse. Despite this configuration, the oscillator’s sound persists continuously without proper note termination. Thank you a lot! ❤❤❤
Hi brother, what I feel by your comment is that you are pressing the key long enough so the plug-in is working on that note, I would suggest to record whatever you are playing through a Synth first and then apply the filterverse plugin on it as its velocity sensitive
In this video you will see that this is not the case You have many ways to control volume in filterverse Adsr to control the audio volume of the Osc is one of them.
Erez should do a jam session of his amazing skills. just play for as long as he can, one of the most amazing talented people i know
this is insane
Hey everyone)) These presets is just mindblowing... The exact firm Mushrooms sound. Just imagine guys how long we was awaiting for this moment! Billion thanks and great hug Erez!!! Up the Mushrooms! 🍄🍄🍄🍄🍄
Waiting for 4 hours now, excited for this one
Top performer and plugin by Erez and the Polyverse team ❤ great one
Agree with the rest, simply amazing as always! 🎉
Awesome video! More like this going forward.
Was braucht man mehr? Epic!
Very very nice. Thanks for the inspiration and the presets :)
To set up Filterverse as oscillator do the following:
- Add an Oscillator as modulator
- Open it's Audio output
- Insert an Envelope
- Right click on the top right of the Oscillator modulator and increase X-Mod from the Envelope to the max
- Enjoy :)
How to get midi data to the plugin depends on your DAW but shouldn't be hard to find out. The Google knows ;)
Thx, i was scratching my head trying to figure out how this was happening without any input audio
But since you can't opem Filterverse as an instrument and only as an effect - how do you set it up to begin with? If you open it as an effect on a source plugin what do you do with that plugin's sound?
@@bateimidrashnetwork In Bitwig it works out of the box but most DAWs should be able to do it. As I mentioned above, you might have to research a bit
@@theRumbleChannelWhich part of what i wrote are you refering to? Midi routing isn't supposed to be a problem. But the audio is
@@bateimidrashnetwork Sorry maybe I misunderstood. But as I mentioned before you have to figure it out by yourself. I don't even know what kind of software you are using, and even if I would have to google it as well if it's not Bitwig you're using. Good luck :)
This is insane!!!!🤯❤️
Great combo....Filterverse and Unify
Haven’t been able up till now to properly set it up as a synth in cubase. Is there a tutorial somewhere?
Ps i see the earlier comment now. I’ll just sit and wait
Shout out to Unify! Could you share the presets? Edit: Couldn't find the news story related to this video.
אייזן שחרר איזה קטע חדש עם הפילטר
✌🏾
Thamks! Joining the request for a tutorial how to set this up in cubase. Since you can't load Filterverse as an Instrument but only as an effect you add to another plugin i'm not sure what happens to the source sound, how you only hear filterverse and of course how to do all the rest of the routing to make it work properly. Thanks!
We’re planning a video on this topic, stay tuned!
@PolyverseMusic great! Thanks!
Hello Erez and Polyverse team.
Would you be so kind as to share how to Set up Filterverse in Cubase correctly for using as a synth, you guys responded in comments under previous stream video`s that will highlight this. So, please… ))))
Specifically, I am unable to play notes with proper sound termination, which significantly impacts Filterverse usability. When I using Filterverse with a single oscillator, the sound continues indefinitely after pressing a key on my MIDI keyboard. The tone changes only when another note is pressed, but sound again does not stop.
Maybe it is somehow relates to some Midi settings in Cubase or any other. I followed the standard setup in Cubase:
Created an audio track with Filterverse loaded as an insert.
Added a MIDI track with its output routed to Filterverse.
Despite this configuration, the oscillator’s sound persists continuously without proper note termination.
Thank you a lot! ❤❤❤
Hi brother, what I feel by your comment is that you are pressing the key long enough so the plug-in is working on that note, I would suggest to record whatever you are playing through a Synth first and then apply the filterverse plugin on it as its velocity sensitive
@buzzpsy Hey man, no no, it just single touch, even shorter than second for sure, and it sound unstoppable until next touch...
@Sergei_Uvarov it's the Synth you are using, or check the sustain, if sustain is full, it never stops specially with analog synths
@Sergei_Uvarov sustain should be at 40% and release on 50% for better results
In this video you will see that this is not the case
You have many ways to control volume in filterverse
Adsr to control the audio volume of the Osc is one of them.
🍄🍄🍄🍄🍄🍄
peter-and-the-wolf
@@leonardgossler4701 ❣️❣️❣️
🇮🇱🇮🇱🇮🇱🇮🇱🇮🇱🇮🇱🇮🇱🇮🇱🇮🇱🇮🇱🇮🇱🇮🇱🇮🇱🇮🇱🇮🇱💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚🤍🤍🤍🤍🤍🤍🦁🤍☀️🤍🤍🤍🤍🤍🤍❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️