I've been debaiting on these exact ones no one really showed the patterns like you did or showed them during the day. Its easy to look bright at night but thanks to your vid im pulling the trigger and getting them. How long have yours lasted?
I got these same lights, tried hooking them up to the cigarette adapter as well as directly to the battery and nothing happened. App "led hue" cannot find the lights so I am unable to connect to app via bluetooth. Any ideas what I could be doing wrong?
Damn it, I’m trying to convince myself not to buy them and your video is about to make me hit buy, I need this for my DSM 😂😂😂 Also that is a beautiful integra
Bro, you made this look so easy. I spent about 5 hours on install, and it was working perfectly for 5 minutes before all hell broke loose. 1- App “LED Hue” barely connects.. 2- mine keeps flickering.. 4- now I get a P2610 error code from scanner tool.. 3- It’ll work good sometimes then act up. Literally got it yesterday. FYI, I already have a sub/system installed and HID headlights this is 2016 Benz c300.. ok Here’s where my issue is: I first T-tapped the red wire to my Headlight, and grounded the black wire to a random bolt place. (Mind you I had to strip that wire down to separate the black and red wires, took forever) that bluetooth controller is just sitting at the bottom of engine bay FYI...Worked 5 min then started acting up (flickering, two strips in back would turn on & off by itself... seemed to turn on & off when sub bass hit heavy as if it was on music mode) To try and fix, I then took the ground wire and attached directly to negative terminal on battery. Now all lights are on & don’t flicker, but Bluetooth barely connects, lights don’t change when it does, and that’s when it gave me the P2610 error code. The battery voltage is way higher Than normal when I checked. Mind you, my car was PERFECT before this, no codes whatsoever nothing. So can you shed some “light” (no pun intended) on what the heck I’m doing wrong? Tell me you never had issues with this or connecting Bluetooth app and I’ll give them a shot. Already reached out to support. Only thing I can think of is to disconnect from headlight and connect to a fuse?? Any help is appreciated bro Cuz it seems like it’s working for you. It’s the Same product. Even if we can hop on a call anything, I love this thing and want to keep it, just not sure of the issue.
You should’ve just wired them directly to the battery or a simple quick connect to a fuse I have 4 of these sets on my car. 1 under the car, 1 kit in the grille, 1 in the engine bay and my hood scoop. Installed everything in 3hrs Lighting trendz headlights but I didn’t feel like spending $1000 on lights vs $230 On amazon for 4 separate kits
You just need to connect the 2 wires to a ground and a positive. Any switched source will work. You can even use the power and ground for your radio. That comes on with the key
Had the Korjo kit on my 18 Fusion and they looked great. On my 22 accord I went with Govee, and I’m not a fan of them. Too short on the sides and no really good movement. Buying the korjo kit to replace the Govee kit. Highly recommend the korjo kit.
Justo got mine today, I was wondering which one is the front pair and the rear ones? I don't know if you wired them like they are supposed to, or if I am wrong please tell me.
Cristian Roman so it’s called under glow but the one I got is Govee under glow, it was only 34 bucks but you have to hard wire it to a 12 volt constant.. it comes with 3m and brackets and zip ties and you have to control the light with a app
Hey how far in do you install the lights because I don’t want it to be in the way for when I or someone else have to jack the car up to change a flat tire or something like that
I have the exact same kit I do know that you can pick your favorites by clicking the heat icon. But as far as setting up the favorite I haven't tried that one yet. I love the rainbow effect
I'm with you. There are some basic light pattern functions that I would expect to be available on an app. Example, I'm trying to look for rock lights where I would be able to change each wheel well a different color.
@@choyoung7432 The app shuts off the lights but it does not power them off completely. The bluetooth module is still consuming power to emit the signal that your phone needs to shut the lights off. Leaving these lights hardwired to your battery with out a killswitch will possibly drain your battery even if the lights are "off" because of the bluetooth module.
I have radiator fans to turn on with my key. So I wired up to those. Your best bet is to use a switched source. Radio, cigarette lighter (if it turns on with key. Not familiar with s2k), etc. If I dont use the lights, I turn the brightness all the way down in the app to turn them off. It remembers this setting until I need it and turn the brightness up. Hope that makes sense.
Rootbeer Integra is there a different with the connections? Cuss i have both connections on batteries. You know the difference? And i don’t even think my car has fog light bro.
Personally I like them directly. So when I am away from the car I can turn them on and watch them dance. (Edit) I had to install a switch because they were killing my battery
Video would’ve been even better had you took the time to show the functionality of the app being used on the phone and what settings your had yours under etc
@@CarloneLNGLD if you wire in with a switched power source (windows, radio, lights, etc.) They will turn off when you turn the key off. If you have on a constant power you could install a switch or just turn the brightness all the way down
I had this installed on my 2016 civic. It killed my battery but maybe it was because the people that installed it didn’t install the kill switch (cigarette adapter) . I gotta order a new kit so hopefully the kill switch will fix my problem.
@@LevelGrinders yeah they fs messed up something. Hopefully when I redo this kit it’ll actually stay on and not kill my battery. Also how is the underglow for you rn? Still on and everything?
@@paulpadilla3184 Then wire it to your battery, or an empty fuse that's inside the car. Let me know what you want to see, I just got mine in the mail today and will film the install.
So ur kit hasn’t killed ur battery yet that’s amazing my kit killed a brand new battery in like 3 months guess the guy did something wrong will hooking my lights up
@@LevelGrinders well as far as I can see it’s just the positive wire and the negative wire going to the battery I’ve seen some videos it might be the fuse that’s on one of the wires
Hey my wife bought some of these we tried them out before installing and they worked fine after install they won’t come using the 12v cigarette adapter that they provide and the car cigarette lighter works fine? What did I do wrong ? Do I need the app to make it work? Any information would help please and thank you ahead of time.
Check to see if they connect via bluetooth. The set comes with some instructions on connecting via phone. Maybe the brightness is turned all the way down which turns them off
thank u for posting this i got the same LEDs on amazon today now i have to install them to my hyundai genesis coupe and didnt have a clue where to start! but i wish u could have showed how u hooked them up to the power source! but i will figure it out!!
Theres many ways to connect them to a power source. You can use the adapter they give you and connect via cigarette lighter 12v source. OR you can connect to a constant or ignition switched 12v source via the fuse box. Right now I have mine connected to a constant 12v source in my engine bay. I run my fans constantly and utilized that power source. In the app I just turn the brightness down before parking(so they turn off). The lights only come on when I turn the brightness back up in the app. This elimimates the need for an inline switch
@@LevelGrinders where do you connect both pairs of the red/black wires? one pair is connected to the led strips and the other is connected to the cigarette lighter. Thank you in advance
I ended up moving them some to close up the gap. Looks good and the light is bright as fuck. It probably wouldnt be much of an issue with a stock height vehicle. The lower the car the more apparent the gap would be. Easily fixable though by just adjusting it.
Took me 2 to 2.5 hours. Only because I was filming haha. It would have taken about 1.5 hours without. I had to drill holes in the metal diffuser and on my front splitter. So that added to the time some.
You can just tap in to a 12v source. Easiest way to do it is run from a fuse in the fuse box. Radio fuse would be a good one for switched source. If you want to turn them on with car off, find a constant power like door locks and put a switch between if you like.
@@BmwMe-uh9sy had this car for 10 years. No clue how much I have in it. It's not a crazy amount tho. Less than 15k from 10 years ago. I am also sponsored by buddy club, truhart, etc. That helps on the parts. My wallet ain't bad tho 😂
My wife surprised me and ordered the same kit for my Mini Cooper, I’m installing mines today
Best video I’ve seen so far on this product, You did a good job on showcasing what we can expect! 👍
How was the wiring or how did you do it? I’m not really good at wiring stuff lol
How long did the lights last for you. I just ordered some and ive just noticed some bad reviews its not too late to cancls it
I just ordered too I few minutes ago lol
@@dvasquez2530they where actually pretty good but I ended up scrapping and took a chunk of it out
Amazing showcase and install of the korjo lights im ordering the same kit and getting an idea of the quality this looks amazing for the price
I've been debaiting on these exact ones no one really showed the patterns like you did or showed them during the day. Its easy to look bright at night but thanks to your vid im pulling the trigger and getting them. How long have yours lasted?
Still going strong since the date of this video 🙌🙌
@@LevelGrinders that was a year ago ,trigger pulling aswell
I got these same lights, tried hooking them up to the cigarette adapter as well as directly to the battery and nothing happened. App "led hue" cannot find the lights so I am unable to connect to app via bluetooth. Any ideas what I could be doing wrong?
Just about to install these myself, just unsure how I want to wire them.
I'm leaning towards attaching to a toggle switch... I think.
Yours look good!
Love the integra bro def thinking about putting these in my r32, what did your son think of them?
He loves them. Still to this day they work and have not had any issues 🙌🙌. r32 is on my list of things to buy lol
Nice vid man. I just ordered these and was wondering how bright they really were. They look great and I'm exited to get mine installed.
They are super Bright
Can I disconnect the 2 long pieces and just use the 4 short ones ?
Absolutely
Dame theses things bright I need to get one for sure
interesting, the led inside strip on my kit is white not black, and the tape is not labeled 3m lol
Damn it, I’m trying to convince myself not to buy them and your video is about to make me hit buy, I need this for my DSM 😂😂😂
Also that is a beautiful integra
Appreciate it. Pull the trigger on it. They are still working like a champ. Love them
@@LevelGrinders I bought them. Just thought you would like to know, gonna install them on my day off lol
I want these for my dsm aswell but the wiring in not good at that aswell I want to hard wire it tho
im planning on some under glow for my 2g gsx too :D
How long did it last ? Is it still glowing or has it pooped out
Bro, you made this look so easy. I spent about 5 hours on install, and it was working perfectly for 5 minutes before all hell broke loose.
1- App “LED Hue” barely connects.. 2- mine keeps flickering.. 4- now I get a P2610 error code from scanner tool.. 3- It’ll work good sometimes then act up. Literally got it yesterday. FYI, I already have a sub/system installed and HID headlights this is 2016 Benz c300.. ok Here’s where my issue is:
I first T-tapped the red wire to my Headlight, and grounded the black wire to a random bolt place. (Mind you I had to strip that wire down to separate the black and red wires, took forever) that bluetooth controller is just sitting at the bottom of engine bay FYI...Worked 5 min then started acting up (flickering, two strips in back would turn on & off by itself... seemed to turn on & off when sub bass hit heavy as if it was on music mode)
To try and fix, I then took the ground wire and attached directly to negative terminal on battery. Now all lights are on & don’t flicker, but Bluetooth barely connects, lights don’t change when it does, and that’s when it gave me the P2610 error code. The battery voltage is way higher Than normal when I checked. Mind you, my car was PERFECT before this, no codes whatsoever nothing.
So can you shed some “light” (no pun intended) on what the heck I’m doing wrong? Tell me you never had issues with this or connecting Bluetooth app and I’ll give them a shot. Already reached out to support. Only thing I can think of is to disconnect from headlight and connect to a fuse?? Any help is appreciated bro Cuz it seems like it’s working for you. It’s the Same product. Even if we can hop on a call anything, I love this thing and want to keep it, just not sure of the issue.
Dude don't fuck with manufacturer engineered wiring cover and split it to get more exposed wire. Butt connectors and shrink tube work wonders
You should’ve just wired them directly to the battery or a simple quick connect to a fuse
I have 4 of these sets on my car. 1 under the car, 1 kit in the grille, 1 in the engine bay and my hood scoop. Installed everything in 3hrs
Lighting trendz headlights but I didn’t feel like spending $1000 on lights vs $230 On amazon for 4 separate kits
@@mrrumph4877 I forgot what I did but I remember it was an easy fix. Toggle switch and everything with it too. It’s flawless now.
@@Krypto_Goat good deal
What’s the name of the app I lost my manual and don’t know it 🤦♂️
Can you show how you wired them. Im literally sitting in my driveway trying to install them and im so confused
You just need to connect the 2 wires to a ground and a positive. Any switched source will work. You can even use the power and ground for your radio. That comes on with the key
Just did mines today, i wish they came in 4pc instead of 6, i feel like its easier with 1 long bar on the front and the back
skipped the whole process of wire thru car 🤦🏾♂️
Mines wired on my fans. Its literally 2 wires that go to a 12v source. You can use any 12v source in the car.
for real, waste of time
like the way these came out. how long can you run them with the car off?
Teggy is so cleaaan bro, bout to install these lights on my g35
Yo bro did you end up installing it on your g? I just got these lights and I’m trying to figure out the best way to install it and do the wiring
@@philipthompson5588 i’m trying to do the same you found out the best way to do it
I appreciate the video I just ordered some they'll be here today I'm excited
How are they working out for you so far?
Had the Korjo kit on my 18 Fusion and they looked great. On my 22 accord I went with Govee, and I’m not a fan of them. Too short on the sides and no really good movement. Buying the korjo kit to replace the Govee kit. Highly recommend the korjo kit.
Hello could you make a video to see some of the patterns it has
How the white color is? Is it pure white or bluish white?
any issues with water getting in them? saw some reviews saying they arent waterproof as they claim and rain ruined the lights
I'm curious too. I used some xsprite ones, and they only lasted half a month. I just ordered these korjo lights
Justo got mine today, I was wondering which one is the front pair and the rear ones? I don't know if you wired them like they are supposed to, or if I am wrong please tell me.
Did you hard wire or use the cigarette button ?
Hard wire. You can put on any 12v switched source.
Just ordered mine today! Gonna install on my Honda beat
Slide a pic
Where did you order them?
Cristian Roman I got some off Amazon
What is it called?
Cristian Roman so it’s called under glow but the one I got is Govee under glow, it was only 34 bucks but you have to hard wire it to a 12 volt constant.. it comes with 3m and brackets and zip ties and you have to control the light with a app
Hey how far in do you install the lights because I don’t want it to be in the way for when I or someone else have to jack the car up to change a flat tire or something like that
Just mount them so they dont hit the jack points. I was about 3inches from the outside of the car but made sure to route around the jack point areas
I bought this exact kit, just wondering how well they with stand water ? I know their waterproof I'm just wondering if any issues with them
I'm installing mine and then going on a 7k mile road-trip. That should be a great test.
@George Shallaby Currently on that roadtrip.Ill be back July 10th.
I’m thinking to order some today but since I got a mustang the exhaust is right on the back and idk if it’s gonna just make it harder for me
Definitely going to have to get this it looks great
I cant wait to play with it some more tomorrow.
Can u set up a light pattern with the app like pick what colors you want to go in order
I have the exact same kit I do know that you can pick your favorites by clicking the heat icon. But as far as setting up the favorite I haven't tried that one yet. I love the rainbow effect
I'm with you. There are some basic light pattern functions that I would expect to be available on an app.
Example, I'm trying to look for rock lights where I would be able to change each wheel well a different color.
Where do the wires run ?? Like to the battery and the inside ?
I just ordered these now
Where did u get and what’s the link for the rear diffuser
My buddy on Instagram @imakecarparts
@@LevelGrinders I’ll check em out :) thank you boss
How do you wire it to the battery??
Finally a video with a guy that knows about cars and not some clapped v6 Camaro/mustang lmao u can never trust those guys haha
🤣🤣🤣🤣
where do you install the little control box?
Does it come with the brackets
It does
What’s the Bluetooth app name
Do they strobe?
How much this cost
can you hook up from inside of the car?
Yeah. It came with a cigarette lighter adapter. I just opted to cut it and splice into what worked for me.
How you turn them off if you don’t used the cigarette lighter?
Hard wire a switch.
@@HondaFit4Adventure what... just turn them off with the app 🤷🏾♂️
@@choyoung7432 The app shuts off the lights but it does not power them off completely. The bluetooth module is still consuming power to emit the signal that your phone needs to shut the lights off. Leaving these lights hardwired to your battery with out a killswitch will possibly drain your battery even if the lights are "off" because of the bluetooth module.
Awesome vid!!! Did you power it to the car battery or fuse box?
Ordered mines today 🔥🔥
Did you connect it to your battery? Im trying to figure out how to hook it up to my s2000
I have radiator fans to turn on with my key. So I wired up to those. Your best bet is to use a switched source. Radio, cigarette lighter (if it turns on with key. Not familiar with s2k), etc.
If I dont use the lights, I turn the brightness all the way down in the app to turn them off. It remembers this setting until I need it and turn the brightness up.
Hope that makes sense.
@@LevelGrinders thanks man dope integra btw I used to have a dc2 itr 🥲🥲
mine have NOOO stick and doesn’t say 3m but bought same one
Im all about it, they look sick! Ordered a set for my rx7 fd, frothin🤙
What app did you dowoad
How do they look today? Any issues?
Still going strong. Bluetooth still works as well
Ayy bro i literally just got mine like 2 hrs ago. How did you connect it?? To the battery both positive and negative? or fuse and negative?
Right now I have mine connected in with my fog light wires. Tomorrow I will install a switch for it.
Rootbeer Integra is there a different with the connections? Cuss i have both connections on batteries. You know the difference? And i don’t even think my car has fog light bro.
You could connect to any accessory fuse. This would trigger with the key. If you put a switch inline you can control on that
Personally I like them directly. So when I am away from the car I can turn them on and watch them dance. (Edit) I had to install a switch because they were killing my battery
Where did you hard wire the positive and negative?
wondering the same thing
How did you connect the wires?
Connected them to a switched source. That way when the car turns on, they have power
@@LevelGrinders where exactly? I also have a honda integra dc1
Video would’ve been even better had you took the time to show the functionality of the app being used on the phone and what settings your had yours under etc
The app is literally pretty straight forward. Pick color, pick preset , speed and brightness.
How do you turn it off?
@@CarloneLNGLD if you wire in with a switched power source (windows, radio, lights, etc.) They will turn off when you turn the key off. If you have on a constant power you could install a switch or just turn the brightness all the way down
How did u do the wiring ?
I'm put some on my girls car for her bday jus got them in same ones u got bro
Are yours still working to this day ? I got mine 2 days ago and installed them yesterday and they’re already flickering on the rainbow mode
I had this installed on my 2016 civic. It killed my battery but maybe it was because the people that installed it didn’t install the kill switch (cigarette adapter) . I gotta order a new kit so hopefully the kill switch will fix my problem.
Whoever wired it up didnt put it on a fuse that gets 12v when the car is on. They must of wired it to constant power and it drained it over time.
@@LevelGrinders yeah they fs messed up something. Hopefully when I redo this kit it’ll actually stay on and not kill my battery. Also how is the underglow for you rn? Still on and everything?
App controler name
Bought to install these on a 2019 STi
Will it stay on with just the tape?
Im sure it would hold for some time but the bottom of the car is exposed to alot of debris and water. I would secure with a secondary source.
@@LevelGrinders okay I just didn’t want to drill into my car, also does it require re wiring, like how do you connect it to the 12v adapter
where does the power come from?
You can hard wire it directly or you can use your 12v plug.
@@HondaFit4Adventure i’m not trying to use the 12 volt plug
@@paulpadilla3184 Then wire it to your battery, or an empty fuse that's inside the car.
Let me know what you want to see, I just got mine in the mail today and will film the install.
@@HondaFit4Adventure PLEASE IVE HAD MINE FOR 2 MONTHS AND DONT KNOW HOW
@@HondaFit4Adventure it’s easy where you want them just don’t know how to give them power 😩
So ur kit hasn’t killed ur battery yet that’s amazing my kit killed a brand new battery in like 3 months guess the guy did something wrong will hooking my lights up
Most likely that person connected it to a constant power location or something.
@@LevelGrinders well as far as I can see it’s just the positive wire and the negative wire going to the battery I’ve seen some videos it might be the fuse that’s on one of the wires
@@youngbeats4135 if its directly on battery its constant. It needs to be on a switched source or have an inline switch
Aye bro what app did you use cause I don’t what it is and if it’s dreams color how to connec tit
Everything is in their instructions. Has the name of the app and the settings to use
Hey my wife bought some of these we tried them out before installing and they worked fine after install they won’t come using the 12v cigarette adapter that they provide and the car cigarette lighter works fine? What did I do wrong ? Do I need the app to make it work? Any information would help please and thank you ahead of time.
Check to see if they connect via bluetooth. The set comes with some instructions on connecting via phone. Maybe the brightness is turned all the way down which turns them off
Run cables to your battery instead of that Cigarette adapter. It's probably defective.
Got mine about to install on my protoge
What’s the app name?
Its in the instructions they give you. Its called "LED hue"
Excellent! Looks for bro.
thank u for posting this i got the same LEDs on amazon today now i have to install them to my hyundai genesis coupe and didnt have a clue where to start! but i wish u could have showed how u hooked them up to the power source! but i will figure it out!!
Theres many ways to connect them to a power source. You can use the adapter they give you and connect via cigarette lighter 12v source. OR you can connect to a constant or ignition switched 12v source via the fuse box.
Right now I have mine connected to a constant 12v source in my engine bay. I run my fans constantly and utilized that power source. In the app I just turn the brightness down before parking(so they turn off). The lights only come on when I turn the brightness back up in the app. This elimimates the need for an inline switch
@@LevelGrinders where do you connect both pairs of the red/black wires? one pair is connected to the led strips and the other is connected to the cigarette lighter. Thank you in advance
Did the front look okay with that gap?
I ended up moving them some to close up the gap. Looks good and the light is bright as fuck. It probably wouldnt be much of an issue with a stock height vehicle. The lower the car the more apparent the gap would be. Easily fixable though by just adjusting it.
just to let yall know the LED kit is nice but the white is not so white on it. its more like purple bluish not WHITE at all
Mine is white. Sounds like maybe you chose the wrong rgd settings or maybe just a bad set of lights. I would contact them
@@LevelGrinders might have to cause I have the correct settings cause al the other colors match to the app but not white
These look awesome! How long did it take to get them completely installed?
Took me 2 to 2.5 hours. Only because I was filming haha. It would have taken about 1.5 hours without. I had to drill holes in the metal diffuser and on my front splitter. So that added to the time some.
thank you,
very helpful
Didnt even show the front
Got mine yesterday. You wanna install them ? 🤣 To damn hot outside
Clean af
I have a 350z, and, I was wondering how to do the wiring, I bought them recently and don't want to install them until I'm sure of what I'm doing.
You can just tap in to a 12v source. Easiest way to do it is run from a fuse in the fuse box. Radio fuse would be a good one for switched source. If you want to turn them on with car off, find a constant power like door locks and put a switch between if you like.
Same one I've got on my car.
Is there a cheat sheet that tells you what all the light patterns are?
Not that I have seen. I utilize the favorite mode to keep track of the ones I like.
@@LevelGrinders thanks for the quick reply. How do you save your favorites
@@codykline5879no problem. in the app while choosing patterns, there is a heart you can select at the top to mark that setting as a favorite
Nice !!!!
Police 7:20 😄
it's not actually 3M quality tape lol. idk why these Chinese companys always put 3Ms logo on everything
App
Pretty expensive dc4, 2k wheels 1k bc coils, whole brand new paint job holy fuk that’s a lot of money on an old Honda
It's on bags. Don't forget the engine build, seats, trans work, etc,etc lol.
It's cheap when you do all the work yourself.
@@LevelGrinders how much r you like into it, is your wallet like loaded
@@BmwMe-uh9sy had this car for 10 years. No clue how much I have in it. It's not a crazy amount tho. Less than 15k from 10 years ago. I am also sponsored by buddy club, truhart, etc. That helps on the parts. My wallet ain't bad tho 😂
@@LevelGrinders holy shit anything more then 10k is a bit too much especially a non type r. you do you i guess
um ok
Download
How have they held up over time?
Still working like a champ. 🙌🙌
Did it come with a remote too?
What’s the name off the app?
I use "LED Hue"