Thank you very much for this update I can tell with a bit of experimenting this is going to be a extremely accurate rifle. Out the box the groups are very good my weirauch hw 100 .22 grouped like a shotgun at 25 metres. I now have a Brocock bantam sniper hr and at 25 metres it’s pellet on pellet I haven’t had time to shoot it at 50 metres yet but hopefully next week I will go to the range and give it a thorough testing. I found the build quality of the Brocock to be very good. Once again thanks for the video keep us updated on any changes. Oh yes I almost forgot I found the H&N hunter extremes to be the pellet my rifle likes give them a try.
Very nice video good info , i had 2 brocock compatto in .177 and i was not happy with the accuracy , the other 2 bantam hi lite one in .22 i am ok with and the .25 not happy with the accuracy , i am not sure about the barrels that they are using something is going on. the other daystate Regal are shooting great the FX love it same with the AA 510 even the 300$ BSA and Gamo , Gauntlet , something is not right with the brocock accuracy. thank you again.
A few things to try, they like polymag shorts, maybe try a smooth constant trigger swing " not a slow squeeze, and try airing the gun out then drop the regular down by turning it in 1/4 turn, slow the pellets down .. plus a good barrel scrubbing with a mild grit polish, you may be surprised and smooth rounded funnel shape the pellet chamber entry or the back of the barrel
My Bantam is sub 12 ftlb and is extremely accurate putting the whole mag under a 5 pence coin (less than 10mm) at 50 yards and its unregulated as at these power levels the Harper designed anti bounce hammer and valve assembly do an amazing job with consistency, from shot 12 from a 200 bar fill the shot string is flat with an average of plus or minus 3 fps with a few extreme shots being plus or minus 6 fps with Air Arms 8.44 fields with an average of 800 fps, and it will do this right out to shot 205 before a small drop off occurs, its almost like a reg is onboard, the Harper system is that good, I don't use the single shot tray but its always there if I wanted to do competition, HFT or FT in the UK. just thought I would let you know how they perform at 12 ftlb in case you wanted to drop the power for in barn use. atb Phil UK.
Funnel polish the back of the barrel and the pellet damage will stop and you won't need the tray, as well as polish the transfer port hole in the barrel that's scratching the pellet
Okay is been over a year since you made this video. And I seen the last comment you made saying that you was told to contact Arizona again about the setup of the regulator of this gun not performing correctly. What is the end game result? Did they fix it? Or you got your money back??
Ok. So they told me that they no longer made a 6 power adjuster. So no change on that. I took the barrel off and found that the inlet was milled off center. Inlet angle on one side to almost nothing on the other side. This was deforming the pellets as I cycled the magazine to load them. I machined it so that I had a good angle all the way around. That effectively took care of the issue.
@@midwestairgunner8500 yikes! Thanks so much for replying back... I was seriously looking at buying the brocock sniper xr. But with all the issues this company has... I think I will just get a Dreamline Tat instead. Thanks a Million Mathew.
No. Have not gotten any explanation as to why the gun does this. I contacted Huma directly and they stated their regulators are tuned to be within 3 psi of each shot, which this gun definitely does not do. Their caveat was that they did not know how the manufacturer sets up the rifle.
I got a response from Brocock this morning, here it is: "It does not make sense. Please contact your firearms dealer or Airguns of Arizona and ask them to take a look as it should be a straight line then drop off as you would expect." Terence.
Thank you very much for this update I can tell with a bit of experimenting this is going to be a extremely accurate rifle. Out the box the groups are very good my weirauch hw 100 .22 grouped like a shotgun at 25 metres. I now have a Brocock bantam sniper hr and at 25 metres it’s pellet on pellet I haven’t had time to shoot it at 50 metres yet but hopefully next week I will go to the range and give it a thorough testing. I found the build quality of the Brocock to be very good. Once again thanks for the video keep us updated on any changes. Oh yes I almost forgot I found the H&N hunter extremes to be the pellet my rifle likes give them a try.
Honestly that shot string chart looks outstanding.
Extreme spread of 21 over that many shots.
Very nice video good info , i had 2 brocock compatto in .177 and i was not happy with the accuracy , the other 2 bantam hi lite one in .22 i am ok with and the .25 not happy with the accuracy , i am not sure about the barrels that they are using something is going on. the other daystate Regal are shooting great the FX love it same with the AA 510 even the 300$ BSA and Gamo , Gauntlet , something is not right with the brocock accuracy. thank you again.
A few things to try, they like polymag shorts, maybe try a smooth constant trigger swing " not a slow squeeze, and try airing the gun out then drop the regular down by turning it in 1/4 turn, slow the pellets down .. plus a good barrel scrubbing with a mild grit polish, you may be surprised and smooth rounded funnel shape the pellet chamber entry or the back of the barrel
My Bantam is sub 12 ftlb and is extremely accurate putting the whole mag under a 5 pence coin (less than 10mm) at 50 yards and its unregulated as at these power levels the Harper designed anti bounce hammer and valve assembly do an amazing job with consistency, from shot 12 from a 200 bar fill the shot string is flat with an average of plus or minus 3 fps with a few extreme shots being plus or minus 6 fps with Air Arms 8.44 fields with an average of 800 fps, and it will do this right out to shot 205 before a small drop off occurs, its almost like a reg is onboard, the Harper system is that good, I don't use the single shot tray but its always there if I wanted to do competition, HFT or FT in the UK. just thought I would let you know how they perform at 12 ftlb in case you wanted to drop the power for in barn use. atb Phil UK.
hunter100t
I’m in the U.K. and I have the bantam hr but I completely agree with you about the harper valve
Funnel polish the back of the barrel and the pellet damage will stop and you won't need the tray, as well as polish the transfer port hole in the barrel that's scratching the pellet
Sir. Is bantam stock replaceable with commender ?....
I am sorry, but I have no idea....
Okay is been over a year since you made this video. And I seen the last comment you made saying that you was told to contact Arizona again about the setup of the regulator of this gun not performing correctly. What is the end game result? Did they fix it? Or you got your money back??
Ok. So they told me that they no longer made a 6 power adjuster. So no change on that. I took the barrel off and found that the inlet was milled off center. Inlet angle on one side to almost nothing on the other side. This was deforming the pellets as I cycled the magazine to load them. I machined it so that I had a good angle all the way around. That effectively took care of the issue.
@@midwestairgunner8500 yikes! Thanks so much for replying back... I was seriously looking at buying the brocock sniper xr. But with all the issues this company has... I think I will just get a Dreamline Tat instead. Thanks a Million Mathew.
Thank u....
How to buy? Im from the philipines
Do you get more shots on lower power?
Yes. About 180
@@midwestairgunner8500 thanks
Are you filling to 3400?
Yep
I seem to have the same problem with the regulator dropping on a Brocock Bantam Sniper HR .25 Did you get answers on this?
No. Have not gotten any explanation as to why the gun does this. I contacted Huma directly and they stated their regulators are tuned to be within 3 psi of each shot, which this gun definitely does not do. Their caveat was that they did not know how the manufacturer sets up the rifle.
I got a response from Brocock this morning, here it is: "It does not make sense. Please contact your firearms dealer or Airguns of Arizona and ask them to take a look as it should be a straight line then drop off as you would expect." Terence.
yeah, I thought that was strange, come on... put another gauge on it that's it's not in the red
Omg u talk to much
I agree!! :) Lol. Wanted to cover everything and got long winded.