Hi thanks for your videos but for making puffy when I use smooth command ,it doesn't make my surface puffy.I followed everything exactly same as you but my surface is still flat.how can I fix it?
Great video, really helpful. Is there a way to to this technique, but instead of smoothing/filleting the edges, you get more of a chamfered look? I'm trying to achieve this but with a more angular result. Thanks!
Very helpful video thank you. I was trying to do this with fillet edge, but there were odd jagged lines appearing at the edges as I was trying to fillet, and long spears were shooting out in unexpected places. When I tried to render my drawing using this method, I have kind of remnants from the smoothing I think, like the areas that would be highest on the surface of the disc have grey shadow / outlines around them. Any idea what could be causing this? Thank you!
Hi Riona, Fillet edges is hard on complicate shape with angles like this demo. this is try to mimic the T-Spline effect. When you do the rendering, make sure your model doesn't' have any hidden objects or layers, and you also want to delete all the curves.
@@PJChenJewelryDesign thank you!. I'll remove any extra items and try again. Your help is very much appreciated. I've learned a lot from your channel.
Hi chan Great video i am trying to do this this by following the same steps but it wont get smooth finish the way you do edges are rough and wavy is it because i use rhino 5?? also the smooth menu is different than yours i dont have the options to drag the numbers right or left i am putting manually please advice
If only apply to the pattern. then do the pattern only. or your ring may not be the exact size. if you are using Rhino 7, you can also try the QuadRemesh command
@@PJChenJewelryDesign My Intention Is Not To Hurt You Mam But To Get The Solution. Only For That Video I Am Facing The Problem Rest The Member Video As Well As The Weekly Videos I Am Able To View That, If In The Near Course The Same Problem Arises What Next? How To Address This.
Hello sir I am cad designer but no job any find job me please help me create any jewelry design online work please sir please me I request you my family very depression 😔
![[ENGSUB] UNPRODUCTIVE DAY ใช้ชีวิต (เปื่อยๆ) ด้วยกัน 1 วัน! | OUROAD CLOSEFRiEND SS2 EP.9](http://i.ytimg.com/vi/pyYKZ3kra9w/mqdefault.jpg)
Thanks PJ. Just what I was looking for.
Great!
I have spent a very long time trying to figure out a similar method but I will try this one today!
great. let me know how it goes
thank you my friend..!!! you are a very helpful person.
Happy to help
THANK'S SO LOT
You are welcome!
THANK YOU!)
You're welcome!
This is so helpful! Thank u
Glad it is helpful!
This is a new technique to me thanks PJ awesome vid
Glad you like it!
Thanks!
Super!! Thank you for your support!
New logo!! Lovely !! Congrat!!
Thanks!!
Good tutorial! Going to be using this in some of my future designs!
Great!
Thank you very very happy
You are most welcome
Thank you very much mam
Thank you too
really good way to do it. I will try this now. Thank you
great. let me know how it goes
Рахмат катта! Спасибо большое!
You are very welcome!
really good!
great!
Thanks.
You're welcome
Você é o melhor cara !!!!
Thank you!!
Woow super
Super!!
Hi thanks for your videos but for making puffy when I use smooth command ,it doesn't make my surface puffy.I followed everything exactly same as you but my surface is still flat.how can I fix it?
I thought smooth works only for curves xD. Thank you for this tips!
You're welcome!
Who knew? I kept skipping this tutorial because I thoughtI I knew how to do that. Smooth...
^_^
Great video, really helpful. Is there a way to to this technique, but instead of smoothing/filleting the edges, you get more of a chamfered look? I'm trying to achieve this but with a more angular result. Thanks!
if you use SubD in Rhino 7. You can add the crease to the edge
@@PJChenJewelryDesign unfortunately I only have Rhino 5. Is there anything within that version that would work?
@@KeystoneProdsPA You can try to find T-Spline. It is similar plugin for Rhino 5
Very helpful video thank you. I was trying to do this with fillet edge, but there were odd jagged lines appearing at the edges as I was trying to fillet, and long spears were shooting out in unexpected places.
When I tried to render my drawing using this method, I have kind of remnants from the smoothing I think, like the areas that would be highest on the surface of the disc have grey shadow / outlines around them. Any idea what could be causing this? Thank you!
Hi Riona, Fillet edges is hard on complicate shape with angles like this demo. this is try to mimic the T-Spline effect. When you do the rendering, make sure your model doesn't' have any hidden objects or layers, and you also want to delete all the curves.
@@PJChenJewelryDesign thank you!. I'll remove any extra items and try again. Your help is very much appreciated. I've learned a lot from your channel.
Hi chan Great video i am trying to do this this by following the same steps but it wont get smooth finish the way you do edges are rough and wavy is it because i use rhino 5?? also the smooth menu is different than yours i dont have the options to drag the numbers right or left i am putting manually please advice
You may want to bump up your mesh count. make it finer before you do the smooth.
Great. How do you turn the mesh back into a poly surface? Can you the fillet the poly surface? Thanks
You can use MeshToNURBS command but there will be way too many polygon.
Is there a way to reduce the polygon count or does this mean that you cannot change back to work in nurbs?@@PJChenJewelryDesign
@@mjy596 You can use the command "reducemesh"
@@oleksander5839 Thanks. I'll try the command
Nice channel and great tutorials! Keep it up!
Thanks, will do!
You Tube Member- Was Waiting For Your Reply
?
請問smooth 完表面都有點不平整原因出在哪呢？
depends on the original resolution you have
hi PJ , I d like to know how to go one step back while trimming without deleting the whole process
You can use split instead of trim
If I want to do this on on signet ring, should I select the all parts when I do smooth ??
If only apply to the pattern. then do the pattern only. or your ring may not be the exact size. if you are using Rhino 7, you can also try the QuadRemesh command
im working on a mesh model from the beginning. but smooth function didnt work. i did mesh boolen difference with text/ then smooth
You can also try Quadmesh with Rhino 7
@@PJChenJewelryDesign will try. is it only exist in rhino 7? (im using 6 at the moment. )what shud i put on the number?? just make it higher number?
hi sir why you move this video from members only to evryone ( anyway thank for doing that)
Member get to watch some videos before it get published to public. My members have watch this video one month ago. ^_^
Can't we just do the same with filet edge? Cuz after Boolean Diff we have sharp solid edges and i think we can easily do it with filet edge.
Fillet edge is one of the option but you will have flat top surface.
@@PJChenJewelryDesign Isn't it fat already ?
u did Boolean difference to the cylinder leaving u with the cavity, right?
correct me if im wrong.
@@gopeshsethi2790 that is right
@@PJChenJewelryDesign Ohkay, tysm.
Hi
hi
Whats up number please
Can you change the mesh back to a polysurface?
Oh my.. where were you 2 years ago...
I am here!! Glad you finally find me ^_^
You Tube Member :Unable To View The Star Signet Ring Uploaded in Membership Channel 21 hours ago
I have many views on that video. and it seems working fine.
@@PJChenJewelryDesign I Tried A Lot I Am Facing The Same Problem
No Mam Still The Problem Persist I Am Checking Other Member Videos There Is No issue On this Except For This.
@@manishdas35 that is weird. I keep having new view on that video means it is working for other members. You may want to email youtube.
@@PJChenJewelryDesign My Intention Is Not To Hurt You Mam But To Get The Solution. Only For That Video I Am Facing The Problem Rest The Member Video As Well As The Weekly Videos I Am Able To View That, If In The Near Course The Same Problem Arises What Next? How To Address This.
Hello sir I am cad designer but no job any find job me please help me create any jewelry design online work please sir please me I request you my family very depression 😔