Just bought an 08 Chevy Impala LS 3.5L two days ago. It was in a no start condition and a bunch of codes for low voltage, open circuit and also the P0641 code you have. Owner said he replaced the power steering pump, then after watching this video started to suspect the same issue on this car. Sure as hell once I removed the power steering pump the wiring harness going to my camshaft positioning sensor was eaten through and the sensor was broken too. Thanks for this video it saved my quite the fortune.
thanks im having the same issue on my 07 impala exact promblem 11 23 2022 ill be pulling my pump bk out i was also getting volt refrence 1 circuit status fault. all the same related issue.
Just bought an 08 Chevy Impala LS 3.5L two days ago. It was in a no start condition and a bunch of codes for low voltage, open circuit and also the P0641 code you have. Owner said he replaced the power steering pump, then after watching this video started to suspect the same issue on this car. Sure as hell once I removed the power steering pump the wiring harness going to my camshaft positioning sensor was eaten through and the sensor was broken too. Thanks for this video it saved my quite the fortune.
No idea why this video dodnt have more likes. I had broken wites there. Thank you,
Well thanks for the video sir I will give that a try. It very well might be the problem I am having with my impala
Did it work?
Just fixed one with the wires rub through in the exact same spot took the intake off and wrapped it up good
I have the same issue with my 08 gmc I had a leak of power steering fluid and my wires most likely are damaged just like yours. But how did u fix it?
thanks im having the same issue on my 07 impala exact promblem 11 23 2022 ill be pulling my pump bk out i was also getting volt refrence 1 circuit status fault. all the same related issue.
Hopefully this works for you
Fixed ...one of my.crankshaft wires were pulled apart giving me the reduce engine. Symbol and reference 1. Circuit fault .I'm all good now
How did you fix the wires if you don’t mind me asking?
Stripped the wire added a new one because they're so short or tape it up so it dnt rubb on the engine
Me pasaba lo mismo cambie cuerpo de aceleración y demas cosas pero el problema seguia ahí hasta que hice eso también
i just cleaned them up and covered the exposed wires with electrical tape
Pretty sure this is my issue as well
Hopefully this video helps
@Whats_A_TH-cam it definitely did. I redid the wire in that area and the problem is gone. Thanks for the video.