My Simplified Patina Process for Custom RC Hard Bodies
ฝัง
- เผยแพร่เมื่อ 30 ส.ค. 2023
- This body is available from nightcrawlers3d.com check him out on facebook;
profile.php?...
I have slowly been teaching myself how to patina over the years, finally took a step back and streamlined my process, makes things a bit easier!
If you like shopping with Amain, please help support the channel and use the link below!
www.avantlink.com/click.php?t...
Check out my Amazon influencer store page for some of these products and help support the channel!
amzn.to/2NMKTtX - ยานยนต์และพาหนะ
I love the tiny black spots all over. Looks like you would expect on a car that's been painted several times and then sat in a junkyard for 50 years!
3 coats Light Metal Grey, 2 light Coats Off White, then 2 coats there on of the Paint job History of Your Choice. Vary the Grit usage spiratically once it loiks knackered use an M3 buff Pad to blend the Grit varient and then use a Spray Bottle to apply dirty Water colour. Once dried keep Layering till the weathering is where Your at. Quick Buff pad again and then Matte Clear coat. Optional when the Clear coat is Tacky throw some Mixed Yellow, Red, and Multi Brown Pastel dust at it to give Live Dirt effect. Looks EPIC when done. Clear coat between Dusting Layers so if Ya like a Previous part and think youve wrecked it You can buff it out
Great video. Love the result. ❤️💯
Very helpful thank you.
Great technique. You can also add bubbling rust by sprinkling fine stone powder where rust would be bad like door corners and dabbing it with rust coloured paint.
Heck yeah, I’d buy the kit for the five window coupe 👍👍😎 well I’ll catch you on the next one until then peace and chicken grease 😁👍👍😎
Yeah turned out beautiful dude as always, I really like the Coop body just don’t know what kind of chassis would work with Yep I’m here watching
That IS Bob Ross ! Did you say that was printed? I used this technique years ago, but since the invention of the interweb, literally 5000 ways to weathering, so confusing thank you for reminding me of how this should be done, and just about the same in real life, From Ocala Florida
Have you ever tried using Hairspray or Chipping Fluid? It would make the weathering a lot easier by requiring less sanding to break through the layers.
You just black base it as usual then spray it with Chipping Fluid or Hairspray, then paint it as usual and when it's time to weather it lightly wet sand it, the water will help loosen the Chipping medium and reveal the layers.
I really like this resin cast body, it's the trunk/rear quarter panels that make it. 👍👍
Ive got some chipping stuff, just havent tried it yet. Honestly I keep forgetting lol
Forgot to mention that after you've sanded it to where you like it to seal it with a matte varnish/sealer before doing your final weathering or else you could expose more of the chipping medium to moisture and it will expose more of the layers than you may want. 👌
All I want to know is that Bob Ross in the corner, and when will he start painting happy trees and happy mountains?? Nice work!
Looks great 🎉
It looks super good. 1 of the best yet
That came out pretty good!.
I actually mean "Off" white. Years ago Pure White was concidered a Premium Color for finish so it was More of a Creamy White Primer.
Looks good..
would those weathering/rust wash colors work over a matte black finish? i have an Element Enduro with the scratch n wear finish (matte black w brick red underneath), but i would like to put more effort into it instead of just sanding off the black. thanks for any help!
You could. It would be more subtle over that finish.
That looks incredible, as always! Will your kits eventually be cast as well?
I doubt I’ll do my kits in resin casting. Hope to eventually have them injection molded like Rc4wd bodies though.
@@RCeveryday That'd be awesome!
Would you recommend this same process on a factory Marlin Crawler body? I’m bored with the red body.
Yes it would work well on that. Since that body is smoother it would take less sanding too.
Will this body fit on your shorty kit thanks
It doesn’t work in the kit chassis without modification. The rear step of the frame is too big to fit under the trunk.
Great video man!! I’ve been wanting to try my hand at a patina body and this technique seems like a great place to start! 🦾🦾🦾