Bro. Love love love your Bronco. I have the base with sasquash package. Please tell me where you got that hood from? Ram air hood. Can I get it at the dealership?
Thank you. You can find them on Amazon search: Corner Guards Protector for Ford Bronco 2021 2022 - ANMOSVO Car Front Rear Corner Protector, Anti-Scratch Truck Corner Edge Guards Trims Cover for Ford Bronco 2/4 Doors Exterior Accessories - 4PCS
Looks great well done. Have you found that the hood deflector helps save the windshield from stone chips? Carbon fiber looks good, have only seen it in sports cars like the 911. Thanks 😎
@Executive Black Yeah. Wildtrack all the options. Should have a 23 by Mid February. At least I get the Fox 3.0 for the wait. If I have to add a system I will. It cost to be awesome
@@dznutz8967 I’m sure it will look great. I’m already replacing a windshield which is ridiculous how the shaped it(video coming soon). I’m going to re-lace it it with a bullet proof shield so I can avoid having to do it again.
Awesome looking vehicle man, so the corner trim is applied by 3M tape? What brand did you use from Amazon? Looks to be 3-4 different versions? Also is it the same quality the dealership is asking $500 dollars for???
@@executiveblack403 thanks a lot man, I see those corners on Amazon for less than 100 bucks, if you put it on your build @ ford it’s listed at $500. I sure hate that 10 speaker plus sub B&O system doesn’t sound well. I’m thinking about letting my CL63 and Jeep Wrangler go for a 2023 4 door Wildtrak and I was hoping that system matched the aftermarket I have in the Wrangler.
@@htowncl Had I know that I could have purchased those on Amazon I would have done that instead of paying the $500 plus labor. Oddly you do not see very many of these on Broncos as I see a ton of Broncos in Michigan but haven’t seen one Bronco with these guards on. None also with the Ram Air Hood. I’ll be adding an exhaust system , aftermarket alarm system, upgrading noise canceling in the interior. Did you get the powder coated doors? I picked up Bronco in October and still have not received my doors…they were just received by the dealership last week FINALLY!
Who made the hood? Is the ram air functional? Be careful raising much more w/out adjusting upper control arms & steering components. :) I couldn't tell you're not really an off road person LOL That's definitely not set up for off roading. Looks good for a pavement pounder. I bought the JBL sound bar and mounted that in place of the rear speakers on the C-pillar.
The hood was made by Advanced Fiberglass and it’s a functional hood which that and all of the customizations were completed at the Ford dealership before I picked up the Bronco. I could use a little more lift to add a bigger tire. I could off-road as is as the wheels are built for it and the tires definitely. I would take it for fast off-roading or some hills but definitely not Rock climbing. Too many damaged suspensions, control arms and I don’t want to spend my money that way. It has a B&O system already tried to upgrade cannot do it unless I get rid of the entire B&O system. Not sure I want to invest in that.
Would love to see / hear your dual exhaust addition!
I'll definitely post and have a before and after sound.
Nice that looks Great
Thank you!
Bro. Love love love your Bronco. I have the base with sasquash package. Please tell me where you got that hood from? Ram air hood. Can I get it at the dealership?
Thank you! You can get for a lot cheaper at Advanced Fiberglass. They have the hood and also the wide body kit
Looks awesome. Can you put a link to the corner and Hood guards?
Thank you. You can find them on Amazon search: Corner Guards Protector for Ford Bronco 2021 2022 - ANMOSVO Car Front Rear Corner Protector, Anti-Scratch Truck Corner Edge Guards Trims Cover for Ford Bronco 2/4 Doors Exterior Accessories - 4PCS
Looks great well done. Have you found that the hood deflector helps save the windshield from stone chips? Carbon fiber looks good, have only seen it in sports cars like the 911. Thanks 😎
It does but unfortunately I still have a crack in the windshield. Cannot stress the horrible mistake they made in these windshields.
@@executiveblack403 understand I have the same problem with my Jeep.
Thanks for the compliment on the Bronco. I think the Ram Air Hood also blocks a few things but obviously that’s not the purpose of that hood.
Nice ...Who manufactured the carbon fiber interior and exterior kit ?
Thanks…all of the pieces I purchased were on eBay and Amazon. You just want to make sure they all look the same.
Carbon fiber looks clean
Thank you!
Did you go into settings and change it to surround sound yet?
Yes…once I purchased. Still bad
@Executive Black bummer man. My wildtrack is being built right now finally. Guess I paid for nothing.
@@dznutz8967 You have the Bang Olufsen?
@Executive Black Yeah. Wildtrack all the options. Should have a 23 by Mid February. At least I get the Fox 3.0 for the wait. If I have to add a system I will. It cost to be awesome
@@dznutz8967 I’m sure it will look great. I’m already replacing a windshield which is ridiculous how the shaped it(video coming soon). I’m going to re-lace it it with a bullet proof shield so I can avoid having to do it again.
My wife and my neighbors wife really like theirs
Is this silver or carbon gray? Looks nice my man!
Thanks! This is silver but you cannot lose with either color.
Awesome looking vehicle man, so the corner trim is applied by 3M tape? What brand did you use from Amazon? Looks to be 3-4 different versions? Also is it the same quality the dealership is asking $500 dollars for???
@@htowncl Thanks. The corner trim was from Ford part of my build so I’m not sure.
@@executiveblack403 thanks a lot man, I see those corners on Amazon for less than 100 bucks, if you put it on your build @ ford it’s listed at $500. I sure hate that 10 speaker plus sub B&O system doesn’t sound well. I’m thinking about letting my CL63 and Jeep Wrangler go for a 2023 4 door Wildtrak and I was hoping that system matched the aftermarket I have in the Wrangler.
@@htowncl Had I know that I could have purchased those on Amazon I would have done that instead of paying the $500 plus labor. Oddly you do not see very many of these on Broncos as I see a ton of Broncos in Michigan but haven’t seen one Bronco with these guards on. None also with the Ram Air Hood. I’ll be adding an exhaust system , aftermarket alarm system, upgrading noise canceling in the interior. Did you get the powder coated doors? I picked up Bronco in October and still have not received my doors…they were just received by the dealership last week FINALLY!
Looks great!! Is the Carbon fiber just a wrap?
Thanks. They are individual pieces that you can purchase Amazon or eBay for the interior and the exterior.
Thank you. They are individual pieces that you can get from Amazon or eBay exterior and interior.
Amazing looking Bronco! Love the carbon fiber touches. Did you install it yourself?
@@michman1956 Thank you. All carbon fiber was installed by me.
@@executiveblack403 Awesome job! Would you mind sharing what company you bought the carbon fiber pieces from?
Who made the hood? Is the ram air functional? Be careful raising much more w/out adjusting upper control arms & steering components. :) I couldn't tell you're not really an off road person LOL That's definitely not set up for off roading. Looks good for a pavement pounder. I bought the JBL sound bar and mounted that in place of the rear speakers on the C-pillar.
The hood was made by Advanced Fiberglass and it’s a functional hood which that and all of the customizations were completed at the Ford dealership before I picked up the Bronco. I could use a little more lift to add a bigger tire. I could off-road as is as the wheels are built for it and the tires definitely. I would take it for fast off-roading or some hills but definitely not Rock climbing. Too many damaged suspensions, control arms and I don’t want to spend my money that way. It has a B&O system already tried to upgrade cannot do it unless I get rid of the entire B&O system. Not sure I want to invest in that.
love the car man enjoy , but please don't say Carbon fiber again please lol
I totally overused that in the video. 😁😁😁😁😁
Nice !