Sir understood all the points but could you please make second part of the same video with topic constraints because this is not fully constrained, Thank you Sir
Can you tell me where tp click Construction/Standard Element? I can't find the icon. Edit 1: Nevermind, I found it. Edit 2: In the sketch analysis, it says that some circles are open and thus I can't turn it into 3D. I've been following the instructions for many times now yet the results are the same. When I tried to create a circle only one axis change color. Can you please tell me how to fix this? I only have 5 more days before I have to submit the draft... :(
Bro u can make it define Delete circular array path Then fix all circle with define circle Then make again deleted array circular path then make it centric from tool.
Sir, Tutorials are helpful me Sir you are creating circles by using rotate command but those are in under constrain mode. How to constrain that circles
Give dimension to one circle first then select circles to be constrained then by using auto constraint tool(present in Pin symbol ) u can constraint them
Sir, I Kindly request you to use some other drawings for tutorial purpose because we've already seen these drawings used by you in other CAD tutorials made by you. Thank you... 😊
This profile is not fully constraint .Is there any rule to complete our profile in green colour (it means in fully constraint only).......clear this doubt sir
Bro u can make it define Delete circular array path Then fix all circle with define circle Then make again deleted array circular path then make it centric from tool.
Bro u can make it define Delete circular array path Then fix all circle with define circle Then make again deleted array circular path then make it centric from tool.
when we put the bigger circle tangential to both small circle and when we erase the extra circle of bigger than after that it is tangential to only one circle and erase to another circle. ca somebody help me
I love all your tutorials. The English is simple. You are giving enough time for instructions.
You're welcome 😊
Very nice tutorials. Perfect for beginners
Thank you 😊
Sir understood all the points but could you please make second part of the same video with topic constraints because this is not fully constrained, Thank you Sir
thank you from my heart
Before we are going to make a 3d profile,it is compulsory to make our sketch with fully constrain
Fully constraint is recommended to avoid automatic change later on.
Can you tell me where tp click Construction/Standard Element? I can't find the icon.
Edit 1: Nevermind, I found it.
Edit 2: In the sketch analysis, it says that some circles are open and thus I can't turn it into 3D. I've been following the instructions for many times now yet the results are the same. When I tried to create a circle only one axis change color. Can you please tell me how to fix this? I only have 5 more days before I have to submit the draft... :(
Drawing is not fully defined so plz explain sir how can we do it fully constrain
you can also make arc at two circe from corner command
Incorrect, your drawing is not fully constrained, some of the portions are in white colour which show that they can move freely in the plane
The drawing will be in underconstrain if we extrude this that shows it contains opens sketch so it doesn't form as a part
Please show how to ISO constraint all the drawing parts. bcoz the small circles in the above drawing are still in white.
Draw axis and give angle. And give same diameter constraints to all small circles
One more constraint is remaining in this part
Give axis to end points of big circle from centre and give angle
Bro u can make it define
Delete circular array path
Then fix all circle with define circle
Then make again deleted array circular path then make it centric from tool.
Awesome sir
Thank you
Sir, Tutorials are helpful me
Sir you are creating circles by using rotate command but those are in under constrain mode. How to constrain that circles
yes, those 6 circles by rotate command were highlighted in white and unconstrained, how to constrain that?
Give dimension to one circle first then select circles to be constrained then by using auto constraint tool(present in Pin symbol ) u can constraint them
Sir how to change refence axis colour as default to white
I was good at engineering graphics, but was not lean towards CAD, CAM.
sir kindly pls complete the constraints
Great sir
Thank you
sir kindly give the names of the sketchers which was drawn in all the tutorials. plzz plzz
But this sketch is underconstraint right .dont we make it's a fully constraint? The rotated circles are in white color so it's not fully?
Sir. Why that pattern is not green. How to constrain that or how to use fix command for this
Sir, I Kindly request you to use some other drawings for tutorial purpose because we've already seen these drawings used by you in other CAD tutorials made by you. Thank you... 😊
Sir,
The bigger circle and the smaller circles are white in color
Thanks sir :)
This profile is not fully constraint .Is there any rule to complete our profile in green colour (it means in fully constraint only).......clear this doubt sir
Inside 6 circles are white in color they must be green please correct it sir other wise everyone will be miss guided
How to add missing tools?
Right click on existing tools and select
Hi
I can not unite the center of the circle with the horizontal line according to the instruction. What is wrong
Not getting intersecting point ( not denoting orange colour for both lines) help
Why small circles are in white color its not iso constraint sketch
Sir finally constraint nahi hua laga raha ??
Sir at 6:13 in constant definition i cant see coincidence option ,reason could be ?
sir i have doubt how can i contact you
worth varma worthuuu
The design have not been fully constrained then how would you say the design has been completed
This drawing is only for sketcher practice. Normally, during 3D creation, you will not have to create such a complicated 2D drawing.
Bro u can make it define
Delete circular array path
Then fix all circle with define circle
Then make again deleted array circular path then make it centric from tool.
@@CADCAMTutorials I've seen much more complicated sketches, believe me!
the two circles are not a tangency in my laptop plzz solve this problems
Do you have link of catia v5?
If you have then I can help you
Sir, the diagram is not fully defined
Bro u can make it define
Delete circular array path
Then fix all circle with define circle
Then make again deleted array circular path then make it centric from tool.
Bhai complete define kr diya kr
i think it is better to use corner instead of circles on 8:07 minute. The worst CAD software i have seen so far
much faster btw
when we put the bigger circle tangential to both small circle and when we erase the extra circle of bigger than after that it is tangential to only one circle and erase to another circle. ca somebody help me