🆘 sir at starting in my catia v5 specification tree was not show but after some random settings it resolved but during these reference point (origin) is not showing in part design know iam not able to solve please help
sir for the first diagram i drew a reference axis but was not able to give the height for eg: in the given diagram if i was giving 15 it is coming over constraint what could be the reason .
Sir, when I am pointing at intersection point while drawing circle, both the lines are not highlighted. Either horizontal is highlighted or vertical. Due to which circle is not being fixed constraint. Please give me some suggestion about this problem.
@@akshayugalepatil6557it's nice to know you Ashkay, I'm in the UK. 🤔 I still can't get it to highlight both lines. It just leaves the circles 'white' unconstrained (just insersection midpoint). I am an absolute beginner. I really do appreciate your help
Hi Akshay, I'm still struggling. Everything is constrained, the intersections and rest of sketch but when I start circle it will only highlight one line or the other. Please help?
My question is, why when your dimensions one side or both sides of the rectangle are instantly defined? I put the measurements to everything you do and you have to right click and select fixed or vertical or horizontal depending on the line. I would like it to be defined as fast as yours, I have to configure something from catia v5 or why doesn't it define it automatically
@@CADCAMTutorials sir I have deleted the operation tool baar,and there is very difficult to select trim,break,chamfer etc ,how to reset it? please tell.
Not sure if what I did was ok, after clicking constraint, I click top of Axis and then right click and selected semiminor axis to get selection that I needed is that ok .
you should also attach the link of the exercise file
thank you so much sir . your voice and language is too clear to hear.. each and every word is clearly understood
I would like to thank you from my heart for all of this
The ellipse is not fully constrained in the last sketch. Should objects be fully constrained?
Which god you believe bless you. Thank you bro, I guess I am going to pass my CATIA exams.
Thank you 😊
Thank you for this video
M at noob level thanks a lot sir
You're welcome 😊
The main thing in your lecture is your voice techniques
Through we can easily understood..
Try to make video on electrical part of V5.
Wondeful explanation Sir , thank you so much 🙏
The ellipse is not fuly constrained. Should sketches always be fully constrained or is it alright to leave it under - constrained?
I have the same doubt
You've to do below
Constrain --> select elipse --> right click --> select semi minor axis
it's good and very easy learning
Glad to hear that
your videos are really good and informative. i can easily understand topics
🆘 sir at starting in my catia v5 specification tree was not show but after some random settings it resolved but during these reference point (origin) is not showing in part design know iam not able to solve please help
Do you have link of catia v5 for download for free students version?
sir for the first diagram i drew a reference axis but was not able to give the height for eg: in the given diagram if i was giving 15 it is coming over constraint what could be the reason .
Tq sir
This is very helpful for beginners like me 🙏
Hello sir mere catia me jo top left me product, part body raha tha hai ao hide ho gaya hai unhide ke she hoga
sir i do not have axis tool at the end of tool bar in 7:39 in my catia V5 . how can i get it . pz help me
If two or more dimensions of lines are same then can we give geometric constraints like other Softwares like nx9?
Nicely taught..
Thank you 😊
why elipses are not constrained sir
Sir, when I am pointing at intersection point while drawing circle, both the lines are not highlighted. Either horizontal is highlighted or vertical. Due to which circle is not being fixed constraint.
Please give me some suggestion about this problem.
Hi Akshay, I had the same thing, did you find a solution
@@3000monkey I found that, when we draw a circle on fixed constraint at some intersection point, it shows both the lines highlighted.
@@akshayugalepatil6557it's nice to know you Ashkay, I'm in the UK. 🤔 I still can't get it to highlight both lines. It just leaves the circles 'white' unconstrained (just insersection midpoint). I am an absolute beginner. I really do appreciate your help
@@3000monkey just share me ur Instagram Id
Hi Akshay, I'm still struggling. Everything is constrained, the intersections and rest of sketch but when I start circle it will only highlight one line or the other. Please help?
is there a command to make equal the circles ?
My question is, why when your dimensions one side or both sides of the rectangle are instantly defined?
I put the measurements to everything you do and you have to right click and select fixed or vertical or horizontal depending on the line.
I would like it to be defined as fast as yours, I have to configure something from catia v5 or why doesn't it define it automatically
Sir I give the dimension but it is not showing the value.
Please tell me Sir what will I do
Check The settings
At the bottom of catia window
Icon will be there (👁️) enable that
can we change constraint style
good
0:54 0:56 0:56 0:57 0:58 0:58 0:58 0:58 0:58 0:59 0:59 0:59 0:59 0:59 0:59 0:59 1:00 1:01 1:01 1:01 1:01 1:01 1:01 1:02 1:02 1:02 1:02 1:02 1:02 1:03 1:03 1:03 1:03 1:03 1:03 1:03 1:04 1:04 1:04 1:04 1:04 1:04 1:05 1:05 1:05 1:05 1:05 1:05 1:05 1:06 1:06 1:06 1:06 1:07 1:07 ❤❤❤ 1:08 ❤ 1:08 ❤ 1:09 ❤ 1:09 1:09 1:09 ❤ 1:10 ❤ 1:10 ❤ 1:10 ❤ 1:10 ❤ 1:10 ❤ 1:11 ❤ 1:11 ❤ 1:11 ❤ 1:11 ❤ 1:11 ❤ 1:11 1:11 ❤ 1:12 ❤❤❤ 1:13 ❤ 1:13 1:13 1:13 ❤ 1:13 ❤ 1:14 ❤ 1:14 ❤ 1:14 ❤ 1:14 ❤ 1:14 ❤ 1:14 1:14 ❤ 1:15 😂 1:15 1:15 😂 1:15 😂 1:15 😂 1:15 😂 1:16 1:16 1:16 ok 1:16 😢 1:16 😢 1:17 😢 1:17 😢 1:17 1:17 😢 1:17 😢 1:17 g 1:18 1:18 f 1:18 r 1:18 ee 1:18 1:19 😂 1:19 🎉 1:19 1:19 1:20 😢 1:20 😢 1:20
1:28 ❤❤❤ 1:29 ❤ 1:30 ❤ 1:30 ❤ 1:30 ❤ 1:30 ❤ 1:30 1:30 😂 1:31 😂 1:31 😂 1:31 😂 1:31 1:31 😂 1:31 😂 1:31 😂 1:32 🎉 1:32 🎉 1:32 🎉 1:32 🎉 1:32 🎉 1:33 🎉 1:33 🎉 1:33 1:33 😢😢 1:34 1:34 😢 1:34 😢 1:34 😢 1:35 😮 1:36 😮 1:36 😮 1:36 😮 1:36 😮 1:36 1:37 😮 1:37 😮 1:37 😅 1:38 😅 1:43 😅 1:43 😅😅 1:43 😅 1:43 😅 1:44 😅 1:44 😅 1:44 😅😅 1:44 😅😅
What is the difference between sketcher and part design?
Sketcher is 2D and part design is 3D.
@@CADCAMTutorials sir I have deleted the operation tool baar,and there is very difficult to select trim,break,chamfer etc ,how to reset it? please tell.
Right click on any toolbar and select operations toolbar.
Very nice explanation sir👌
Not able to measure top and bottom of axis at 13:40 goes to middle not sure what you are doing at that point to get selection .
I click when quadrant point is highlighted.
Never mind figured out thanks .
Not sure if what I did was ok, after clicking constraint, I click top of Axis and then right click and selected semiminor axis to get selection that I needed is that ok .
How can I do in my phone, means which app is gd
Perfect
Thank you 😊
Thank you
You're welcome 😊
Very nice Explanation siiiiir
good explanation
Which cad should be downloaded to my laptop, please send me the link
could you share me those exercise pdf for practice
Plz.. attached also the exercise file sir
Can anybody tell me what is the version of this catia.
V5R21
Please increase speed by 1.25X
please provide drawings pdf
thanks!
спосибо все понятно
Oh penne penne 🎶
aloooo nije ti sve zeleno!!!!
ogranicen si ti
Thank you