2012 Acura TSX Bumper and Headlight Removal- Vlog #35

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 ธ.ค. 2024

ความคิดเห็น • 207

  • @danielbailey553
    @danielbailey553 3 ปีที่แล้ว +8

    A couple suggestions, if you also need to change your high beams and upgrade your fog lights to LEDs for example, now's the time to do it. All at once with easy access for everything.
    One additional hot tip, now is the time to polish your headlights while they are away from the paint. It's really easy and fast

    • @EPICJONTUAZON
      @EPICJONTUAZON  3 ปีที่แล้ว +1

      👍👍👍 Excellent points!

    • @cartere9981
      @cartere9981 2 วันที่ผ่านมา

      I changed the high beams to led and it was so worth it since they are also the day time running lights makes it look more modern imo

  • @berkanekc
    @berkanekc 15 วันที่ผ่านมา

    Quick question at 7:20 you are removing a cable that you are indicating that's holding the d2s bed for the bulb. Does it has any purpose other then holding it such as completing the circuit or anything like that. I couldn't be able to plug it back due to the fact that there has nearly not a space left after placing led projectile which is including a cooling fan behind it which covered nearly the entire space. I couldn't even place the d2s bed into the headlight sealing space and for that reason I also couldn't put the sealing back on and it's open. Trying to figure out how to hide d2s bed in there and seal it with the sealing cap we have firstly removed.

  • @smbmxdirt3427
    @smbmxdirt3427 6 ปีที่แล้ว +5

    Mine was flickering today. I can't wait to struggle to try to fix it.

  • @fgdghfhjgfjgfhjhgjgh
    @fgdghfhjgfjgfhjhgjgh 7 ปีที่แล้ว +10

    This was very helpful.. could you post the link for the Bulbs. so i can buy the exact one.. its the 6000K?

    • @EPICJONTUAZON
      @EPICJONTUAZON  7 ปีที่แล้ว +1

      Thank you yes the link is here: amzn.to/2p97eqz

  • @newunderthesun7353
    @newunderthesun7353 5 ปีที่แล้ว +3

    Old video but still useful. Gave you a thumbs up because your's is the only video that actually shows the in-between steps everyone leaves out.

    • @EPICJONTUAZON
      @EPICJONTUAZON  5 ปีที่แล้ว +1

      haha thanks! I like to be thorough :)

  • @tomdolgin5441
    @tomdolgin5441 4 ปีที่แล้ว +1

    Nice video. I did this, but without removing the bumper and headlight housings. Let me just tell you that I will never do that again! Took me 3 hours! The worst part is getting the igniter ground plugged back in.

    • @EPICJONTUAZON
      @EPICJONTUAZON  4 ปีที่แล้ว

      easier with the bumper off and headlight housing off 😁

  • @toddmarshall1582
    @toddmarshall1582 5 ปีที่แล้ว +1

    Thank you. Your video was very helpful. I had no luck getting in through wheel well to service the lamps, too. Used WD-40 on push locks. It really helps to not to break them when disassembling.

  • @junkimchi
    @junkimchi ปีที่แล้ว +1

    Thanks for the steps. Easy to follow video with good advice.

  • @HamBawlz
    @HamBawlz 7 ปีที่แล้ว

    I used to live a few houses down from you in that complex with the modded silver tsx; used to own a silver wrx bugeye wagon, too.
    my left hid ballast died this week. thanks for the vid.

    • @EPICJONTUAZON
      @EPICJONTUAZON  7 ปีที่แล้ว

      +D. Tran Awh man sucks! should've hooked up for a shoot! Dang sorry to hear about your ballast, glad this video will help!!!

  • @yoballs9060
    @yoballs9060 4 ปีที่แล้ว

    is there any way to adjust the bulbs you just did? I see the running adjustment nipple but not the one for the bulbs you just did. Does any one know how to adjust it?

  • @LoonToon24
    @LoonToon24 7 ปีที่แล้ว +2

    Dont hid bulbs have like a wire connected to them ?? These don't

    • @EPICJONTUAZON
      @EPICJONTUAZON  4 ปีที่แล้ว

      You attach the igniter once the bulb is seated

  • @tfirik
    @tfirik ปีที่แล้ว

    If we remove the bumper clips without breaking them, can we use the same clips or should we get new clips?

    • @EPICJONTUAZON
      @EPICJONTUAZON  ปีที่แล้ว

      Yeah you can reuse them.

    • @AhsanAli786
      @AhsanAli786 25 วันที่ผ่านมา

      @@EPICJONTUAZON is it easy to put back those clips under the headlight?

    • @EPICJONTUAZON
      @EPICJONTUAZON  24 วันที่ผ่านมา

      Yes ​@@AhsanAli786

  • @luixanderton
    @luixanderton 5 ปีที่แล้ว

    Thanks much, your video is awesome. I just changed the bulbs my on Acura TSX 2009. Dealer wanted to charge me $600.00 dollars here in south Florida

  • @joserubio8649
    @joserubio8649 3 ปีที่แล้ว

    This man is a genius, well made video

    • @EPICJONTUAZON
      @EPICJONTUAZON  3 ปีที่แล้ว

      🙏🙏🙏🙏 Please subscribe!!!

  • @web-hz3tz
    @web-hz3tz 8 ปีที่แล้ว

    Nice video, when you had the headlight unit out could you see where the left-right beam alignment is? The up-down is in plain sight but I can't find the other.

    • @EPICJONTUAZON
      @EPICJONTUAZON  8 ปีที่แล้ว

      +web 293769 not sure I understand your question. The projector beam is set, you can't raise or lower it.

    • @web-hz3tz
      @web-hz3tz 8 ปีที่แล้ว

      EpicJonTuazon , I had to have one of my headlights replaced on my 2014 tsx se and it looks like the projector beam is pointing toward the center of the car vs it being straight. I can easily find the adjustment screw for the up-down alignment of the light but can't find the left-right to make the beam straight. I was going off the symbols on the headlight housing "maybe there isn't on for left-right adjustment" Sorry if I wasn't clear before.

    • @EPICJONTUAZON
      @EPICJONTUAZON  8 ปีที่แล้ว

      web 293769 hmm not sure about that. Never encountered leveling of the light.

  • @Tigz09
    @Tigz09 6 ปีที่แล้ว

    Thank you very helpful i will be doing this in 2 weeks time but im getting my inner light plastic sprayed black and the indicator cover taken out my Euro is black and i can't stand the yellow indicator covers. Mine is a 2010 Accord Euro from Australia id assume to take off my bumper and light removal would be the same as this. Thanks again

    • @EPICJONTUAZON
      @EPICJONTUAZON  6 ปีที่แล้ว

      Tigz09 word! Glad I could help! Good luck 🤙🏼🤙🏼🤙🏼

    • @MRskyliner91
      @MRskyliner91 6 ปีที่แล้ว

      Hey mate, can confirm this is the same for Australian models, did mine and followed this video! Worked a charm!

  • @HellZell99
    @HellZell99 ปีที่แล้ว

    Can the 2012 bumper fit on a 2009?

  • @sulemavasquez8261
    @sulemavasquez8261 2 ปีที่แล้ว

    I have a 2012 Acura Tsk and not able to find a way to adjust my light bulbs.. any suggestions?

    • @EPICJONTUAZON
      @EPICJONTUAZON  2 ปีที่แล้ว

      Adjustments on the light bulbs are typically on the bulbs themselves there are some angulation screws. Depends on what bulbs you have.

    • @sulemavasquez8261
      @sulemavasquez8261 2 ปีที่แล้ว

      @@EPICJONTUAZON I bought D2s HID Headlights low beams 6,000 k and Sylvania 2 Halogen lamp bulbs 12.8v, 65 w, white lights , hope that makes sense, are these the wrongs ones lol

    • @EPICJONTUAZON
      @EPICJONTUAZON  2 ปีที่แล้ว

      @@sulemavasquez8261 no they sound like the right ones. You won't be able to adjust the high beams. The HID bulbs themselves you won't either. I got confused with LED bulbs for a sec. On the back of the headlight housing there should be screws to adjust the level of the beam you'll have to take the headlight out make an adjustment and put em back in to see where they line up.

    • @sulemavasquez8261
      @sulemavasquez8261 2 ปีที่แล้ว

      @@EPICJONTUAZON awesome ! We will try that, hopefully it works . Thank you so much for your help

  • @mihailmilanov456
    @mihailmilanov456 ปีที่แล้ว

    I've managed to reach it, through the hood when removing the battery. It was difficult but not soo much.

    • @EPICJONTUAZON
      @EPICJONTUAZON  ปีที่แล้ว

      Nice! Glad to know you can go that route!

  • @iveriani
    @iveriani 7 ปีที่แล้ว +1

    Do you have a link where I can buy OEM speck high beam light bulbs and turning signal light bulbs...I plan on replacing all mine......for my Acura Tsx 2012...Great video....

    • @EPICJONTUAZON
      @EPICJONTUAZON  7 ปีที่แล้ว +1

      Yes here you go! High Beam: amzn.to/2fyr2jv
      Turn Signals: amzn.to/2vq4irg

    • @iveriani
      @iveriani 7 ปีที่แล้ว +1

      EpicJonTuazon Thank You!

  • @waseembux7537
    @waseembux7537 6 ปีที่แล้ว

    Hi . Is it possible to remove the orange amber reflectors in the head lights and .and then all clear ?

    • @EPICJONTUAZON
      @EPICJONTUAZON  6 ปีที่แล้ว

      anything is possible. you would have to heat the adhesive off the lens to remove the plastic covering and then either spray it chrome or black.

  • @JT-sk5nw
    @JT-sk5nw 4 ปีที่แล้ว

    Thanks for the video, this will help about when I replace my headlight assemblies in the spring!

  • @Dionesus
    @Dionesus 6 ปีที่แล้ว

    I have a 2011 tsx. When i turn on my car...the light turns but then slowly turns amber. After like 15 secs...it shuts off. Do you think that is a bulb prob or ballast?

    • @EPICJONTUAZON
      @EPICJONTUAZON  6 ปีที่แล้ว

      I would try replacing the bulbs first. That would be the cheap and easy fix. If it continues to happen with a new set of bulbs then you know its probably the ballast.

  • @elmuzaadventures2259
    @elmuzaadventures2259 4 ปีที่แล้ว

    Whats the connect for the white switch. I can’t find it:/

  • @MRskyliner91
    @MRskyliner91 6 ปีที่แล้ว +1

    Great stuff mate, really appreciate you taking the time to make a video of this

  • @ericknavarro8772
    @ericknavarro8772 4 ปีที่แล้ว +2

    Yo this video helped a lot! I’ve been nervous to do it myself for a while so I would pay a guy to do it. Figured it was about time I did it myself and it’s not so scary anymore. Turned into about 2 hours of frustration and fun!

    • @EPICJONTUAZON
      @EPICJONTUAZON  4 ปีที่แล้ว

      👏👏👏 Good job! Glad the video helped!

  • @berkanekc
    @berkanekc 15 วันที่ผ่านมา

    Trust me your way is way too make sense to change hid bulbs either with hids or leds. I have gone to the other way which took me slightly more than 2,5 hours. Had to remove the battery, and grounding wire on the right side and had to work with one hand and without seeing anything but just feeling the surfaces. It was genuinely frustrating. I certainly advise you guys to take the bumper off and then the headlights which will even save you time and effort I believe, cheers.

  • @agurod-k7p
    @agurod-k7p 5 ปีที่แล้ว

    my car is 2011 (acura tsx). is there a way to replace the low beam without removing the bumper?

    • @EPICJONTUAZON
      @EPICJONTUAZON  5 ปีที่แล้ว

      From my experience no, otherwise this video would not exist lol

  • @mgoonkilo6086
    @mgoonkilo6086 4 ปีที่แล้ว

    I need help putting the bumper back together. Please upload a video or anybody have a video on how you put the front bumper back. I did everything but couldn’t get it to line up or something hold it to push it in the clips

  • @ptftg
    @ptftg 3 ปีที่แล้ว

    great video! I'm going to need to do this as my left hid is turning pink. did you have to adjust the headlight aim after doing this?

    • @EPICJONTUAZON
      @EPICJONTUAZON  3 ปีที่แล้ว +1

      Would be a great time to check before putting the bumper back on!

    • @ptftg
      @ptftg 3 ปีที่แล้ว

      @@EPICJONTUAZON thanks!

  • @andyp1031
    @andyp1031 6 ปีที่แล้ว

    Hey would the sylvania zxe 9005 bulbs work good like the ones you used? My driver side headlight just burned out lastnight and I need to replace it. Great video by the way!

    • @EPICJONTUAZON
      @EPICJONTUAZON  6 ปีที่แล้ว

      9005 bulbs are the high beams. You'll need HID bulbs which are something like D2s Bulbs.

    • @andyp1031
      @andyp1031 6 ปีที่แล้ว

      @@EPICJONTUAZON oh ok good to know, my TSX is a 2009, what bulbs did you get? Where did you buy them? I'll just use those since they looked real good in yours. My high beams work fine. It's the regular headlights I need

    • @EPICJONTUAZON
      @EPICJONTUAZON  6 ปีที่แล้ว

      amzn.to/2NK087P

    • @andyp1031
      @andyp1031 6 ปีที่แล้ว

      @@EPICJONTUAZON thanks dude I appreciate it! , great vids too!

  • @c0mikal310
    @c0mikal310 3 ปีที่แล้ว

    Good comment on the clips under the headlight !

    • @AhsanAli786
      @AhsanAli786 25 วันที่ผ่านมา

      how do you put those clips back when putting the bumper back again?

  • @danteg223
    @danteg223 3 ปีที่แล้ว

    Im about to do this tomorrow morning bcs i tried the other way (going in blind) and it was awful and i dont wanna keep messing anything up since its really hard to connect the ground cable back (again going in blind) so anyone wjo tried this and worked, how long does this process take?

    • @chinchy111
      @chinchy111 3 ปีที่แล้ว

      yeah i got the bulb out through the engine bay but that damn ground cable i couldnt get back on so i gave up. did you take the whole bumper off

  • @rajsandhu8884
    @rajsandhu8884 6 ปีที่แล้ว

    Hi bro, just wondering how hard it is to change the cluster....?? And how to do it...?

    • @anthonymessihv
      @anthonymessihv 4 ปีที่แล้ว

      Why do you want to change the cluster?

  • @kingroll7026
    @kingroll7026 3 ปีที่แล้ว +1

    Does car burn oil?

    • @EPICJONTUAZON
      @EPICJONTUAZON  3 ปีที่แล้ว +1

      Negative

    • @kingroll7026
      @kingroll7026 3 ปีที่แล้ว +1

      @@EPICJONTUAZON thanks, I plan on buying one

    • @EPICJONTUAZON
      @EPICJONTUAZON  3 ปีที่แล้ว +1

      @@kingroll7026 makes for a great dd

  • @dresmith6706
    @dresmith6706 5 ปีที่แล้ว

    Can I put the led in the head light an if so what's the model I see ds2 but I can find in leds is there like a substitute like 9006?

    • @EPICJONTUAZON
      @EPICJONTUAZON  5 ปีที่แล้ว +1

      You can use leds for the high beams but not replacement for the low beam as they are HIDs

    • @dresmith6706
      @dresmith6706 5 ปีที่แล้ว

      @@EPICJONTUAZON so I only can change the fog lights too ?

    • @EPICJONTUAZON
      @EPICJONTUAZON  5 ปีที่แล้ว

      @@dresmith6706 I havn't tried the fog lights but I do know some of the LED bulbs wont fit the fog light housing so just be aware of that.

    • @dresmith6706
      @dresmith6706 5 ปีที่แล้ว

      @@EPICJONTUAZON oh okay thanks this thing is mad complicated

    • @EPICJONTUAZON
      @EPICJONTUAZON  5 ปีที่แล้ว

      @@dresmith6706 lol I feel you

  • @xd1771
    @xd1771 3 ปีที่แล้ว

    Have these lights had any problems over time?

    • @EPICJONTUAZON
      @EPICJONTUAZON  3 ปีที่แล้ว

      So far so good. No issues currently.

  • @TheFamedwarrior72
    @TheFamedwarrior72 7 ปีที่แล้ว +1

    Excellent video! About how long did the job take? I think I'll hit subscribe.

    • @EPICJONTUAZON
      @EPICJONTUAZON  7 ปีที่แล้ว +1

      Probably 1 hr end to end. Just take your time and be careful with those plastic clips. Thanks for the support man!

  • @kingShadow777
    @kingShadow777 7 ปีที่แล้ว

    it did help thank you I just bought a 09 Acura and I will like to know how to remove the logo in front of the bumper cause mines is all scratch can you Help me out?

    • @EPICJONTUAZON
      @EPICJONTUAZON  7 ปีที่แล้ว

      Alejandro Pagan Castro glad it helped. I believe there's some clips on the back of the bumper.

    • @kingShadow777
      @kingShadow777 7 ปีที่แล้ว

      ok Thanks also what about the headlights is there any recommendation to get black halo? a good place to buy them?

    • @EPICJONTUAZON
      @EPICJONTUAZON  7 ปีที่แล้ว

      Alejandro Pagan Castro you want halos in ur headlights? I'm not sure about black specifically but I'd recommend Lightwerkz in NJ they're a great company to start with!

  • @fernandosolano1623
    @fernandosolano1623 5 ปีที่แล้ว

    Thanks!!, saved me alot of money on my 2011 Acura TSX

    • @EPICJONTUAZON
      @EPICJONTUAZON  5 ปีที่แล้ว

      🤙🏼🤙🏼🤙🏼🤙🏼

  • @tomdolgin5441
    @tomdolgin5441 5 ปีที่แล้ว

    When changing my hid bulbs, I could t get the little top white connector back in. But the lights still work. What exactly does that wire do on top? Does it just hold the ballast in like you said? Thanks.

  • @christianmaibach1299
    @christianmaibach1299 7 ปีที่แล้ว +1

    thx. it worked for my Euro Accord as well thank you

    • @EPICJONTUAZON
      @EPICJONTUAZON  7 ปีที่แล้ว

      Christian Maibach you're welcome! Glad the video helped! Please consider subscribing! 🤘🤘🤘

  • @PandaLuv925
    @PandaLuv925 6 ปีที่แล้ว

    Hey, after two years, are the light bulbs still working OK?

    • @EPICJONTUAZON
      @EPICJONTUAZON  6 ปีที่แล้ว +4

      bulbs are still good and kicking.

  • @SmasheDITAman
    @SmasheDITAman 6 ปีที่แล้ว

    Hi, great video explaining this process! Subbed because of it! Just a quick question, as you got 6500k HID do you think this will closely match with 6000k LED DRL/high beams as currently, as stock, they look too much apart colour wise, and I want them to be as close as possible?

    • @EPICJONTUAZON
      @EPICJONTUAZON  6 ปีที่แล้ว +1

      Thank you!!! I think the OEM high beams are closer to 4000k. They're more yellowish than white IMO

    • @SmasheDITAman
      @SmasheDITAman 6 ปีที่แล้ว

      Yeah, I have replaced my High Beams to 6000K LED, so I was wondering what colour temp HID to get to match closely to the High Beams colour wise? I'm am debating whether to get 6000K HID or 6500K HID, if you could help? Thanks

  • @adamwarlock7158
    @adamwarlock7158 8 ปีที่แล้ว

    Ohh. hope you adjust those headlamps after the project

    • @EPICJONTUAZON
      @EPICJONTUAZON  8 ปีที่แล้ว +3

      +Adam Warlock why would I need to adjust the headlamps? just swapped out bulbs

  • @pauls8620
    @pauls8620 6 ปีที่แล้ว

    How long did those bulbs last you bro? Thinking abt getting those

  • @dablordofnibiru9857
    @dablordofnibiru9857 3 ปีที่แล้ว

    This was a very helpful video. Very thorough and easy. I swapped my headlights with new ones. Only thing he doesn’t mention is when you disconnect the battery you will need a code to reset it. Got to wait the weekend to call sewer for proper code

    • @EPICJONTUAZON
      @EPICJONTUAZON  3 ปีที่แล้ว +1

      The code is in your owners manual 😉

    • @dablordofnibiru9857
      @dablordofnibiru9857 3 ปีที่แล้ว

      @@EPICJONTUAZON dope man I’m about to rip through it right now thank you so much

    • @EPICJONTUAZON
      @EPICJONTUAZON  3 ปีที่แล้ว

      @@dablordofnibiru9857 👍👍👍 good luck!

  • @roronoa3327
    @roronoa3327 7 หลายเดือนก่อน

    What tools needed

    • @EPICJONTUAZON
      @EPICJONTUAZON  7 หลายเดือนก่อน

      Flat head screw driver and some socket wrenches

  • @xtcnrice
    @xtcnrice 8 ปีที่แล้ว

    Great video! I thought about using a flathead to free the bumper from the annoying clips, but I was really worried about the flathead scratching the paint on my bumper. Was it difficult to maneuver the small flathead without rubbing against the bumper?
    Again, great video! I'll probably use this going forward :)

    • @EPICJONTUAZON
      @EPICJONTUAZON  8 ปีที่แล้ว +1

      +Gary Phung Thank you! Please consider subscribing! they make a special tool for it! but no if you wrap it with a cloth you should be fine!

  • @iveriani
    @iveriani 7 ปีที่แล้ว +1

    Quick question: Where did you buy your HID headlight bulbs? I saw the link you gave in your comments and I order but when the light bulbs came they were not in the official box like you had in your video...could you post the link again and confirm if the ones I got from Amazon is good? The box is just plain white...

    • @EPICJONTUAZON
      @EPICJONTUAZON  7 ปีที่แล้ว

      Are you referring to the HID bulb?

    • @iveriani
      @iveriani 7 ปีที่แล้ว

      EpicJonTuazon yes

    • @EPICJONTUAZON
      @EPICJONTUAZON  7 ปีที่แล้ว

      as long as they are D2s Bulbs they should be fine. Is the temperature the same? 6.5k?

    • @MrHowiezhu
      @MrHowiezhu 6 ปีที่แล้ว

      @@EPICJONTUAZON is 6.5k the OEM color? i read OEM uses 4.3k.

  • @ben5yt
    @ben5yt 5 หลายเดือนก่อน

    Thank you very helpful once you found the 4th screw. My self at least I hear what I need to and then I stop watching. Would be nice to edit the initial screw could as I was confused and had to watch further for you to realize you meant to say 4 screws.

  • @henrytaylor5047
    @henrytaylor5047 4 ปีที่แล้ว

    Really want to try this , would you guys consider this beginner level ?? I’m tryna save 100 bucks !

    • @EPICJONTUAZON
      @EPICJONTUAZON  4 ปีที่แล้ว

      100% I've never taken this bumper off before this video.

    • @henrytaylor5047
      @henrytaylor5047 4 ปีที่แล้ว

      EpicJonTuazon , Great news, definitely subscribing man. Just got this car and your videos are on point. Thanks again

    • @EPICJONTUAZON
      @EPICJONTUAZON  4 ปีที่แล้ว

      @@henrytaylor5047 🙏🙏🙏 good luck thanks for the support

    • @henrytaylor5047
      @henrytaylor5047 4 ปีที่แล้ว

      Hey at 7:45 ..What is the aluminum piece that detaches from the bulb called , it has the braided cable attached ( found out mine was burned completely). Thanks for the help , was able to get my bumper off easy !

    • @EPICJONTUAZON
      @EPICJONTUAZON  4 ปีที่แล้ว

      @@henrytaylor5047 I think it's a ground cable but I'm not certain.

  • @wongelfski4681
    @wongelfski4681 6 ปีที่แล้ว +1

    Well I hope you put in LEDs so you don’t ever have to do that again

    • @EPICJONTUAZON
      @EPICJONTUAZON  6 ปีที่แล้ว

      Wong Elfski LOL did HID bulb swap. May end up doing it again down the road. Maybe do quick release buttons in the next video! 🤘🏼🤘🏼🤘🏼

  • @TowProVlogs
    @TowProVlogs 4 หลายเดือนก่อน

    Super helpful bro

  • @1GTASANANDREASCJ
    @1GTASANANDREASCJ 8 ปีที่แล้ว

    On the passanger side it's fairly easy to replace the blub but on the drivers side...no chance. Even my car dealer remove the bumper, because it's much easier

    • @EPICJONTUAZON
      @EPICJONTUAZON  8 ปีที่แล้ว

      +1GTASANANDRESCJ yeah It was more worth it for me to just to remove the bumper bc I was changing both bulbs. Good to know tho! Thanks for the tip!

    • @1GTASANANDREASCJ
      @1GTASANANDREASCJ 8 ปีที่แล้ว

      +EpicJonTuazon one thing is different to mine Honda Accord (live in Europe, they sold these as Hondas): the wheel arch do only have one screw on each side. Do you have a sport package? Maybe that's why you have three screws.

    • @EPICJONTUAZON
      @EPICJONTUAZON  8 ปีที่แล้ว

      +1GTASANANDREASCJ its a special edition. Not sure if that really makes a difference.

    • @thepatel5004
      @thepatel5004 7 ปีที่แล้ว

      my Honda Accord in the UK has the three screws though, so it may be the case, because the special edition one has a lip on the bottom of the bumper in the UK

  • @s_nt_i8961
    @s_nt_i8961 7 ปีที่แล้ว

    Thanks mate this video it's very helpful. You hit save my time.

    • @EPICJONTUAZON
      @EPICJONTUAZON  7 ปีที่แล้ว +1

      Thank you! I'm glad it helped! No point in wasting time! Please consider subscribing!!

  • @luisvazquez9057
    @luisvazquez9057 6 ปีที่แล้ว +1

    I need help getting those lights please😁 and the name of them,cause my acura needs it too

    • @EPICJONTUAZON
      @EPICJONTUAZON  6 ปีที่แล้ว +1

      The bulbs? they're direct HID replacements. Link should be in the description!

    • @luisvazquez9057
      @luisvazquez9057 6 ปีที่แล้ว +1

      EpicJonTuazon ok i will see i like the video bro

    • @luisvazquez9057
      @luisvazquez9057 6 ปีที่แล้ว

      EpicJonTuazon can't find them

    • @EPICJONTUAZON
      @EPICJONTUAZON  6 ปีที่แล้ว +1

      Here you go! D2S bulbs! amzn.to/2td6Xm1

    • @luisvazquez9057
      @luisvazquez9057 6 ปีที่แล้ว

      EpicJonTuazon thnx bro is it just for 1 bulb or does it have both

  • @rezh.6193
    @rezh.6193 4 ปีที่แล้ว

    Nice video man.

  • @Elheino
    @Elheino 2 ปีที่แล้ว

    Thanx great video.

  • @alobando9690
    @alobando9690 5 ปีที่แล้ว

    Thank you, one of the best!!! Way to go

    • @EPICJONTUAZON
      @EPICJONTUAZON  5 ปีที่แล้ว

      thank you!!! please subscribe!

  • @llineedsadragstrip4089
    @llineedsadragstrip4089 5 ปีที่แล้ว

    good video well spoken not too much camera shake thumbs up bro

  • @tubeman62
    @tubeman62 4 ปีที่แล้ว

    Thanks! Nice job on the video!

  • @black5corpion76
    @black5corpion76 8 ปีที่แล้ว +1

    nice.. I have 2013 model ..i guess is the same way..

    • @EPICJONTUAZON
      @EPICJONTUAZON  8 ปีที่แล้ว

      +black5corpion76 should be very similar. do check though if you can fit it through the engine bay before you go removing the bumper!

  • @briantano1248
    @briantano1248 8 ปีที่แล้ว +2

    thank you!

    • @EPICJONTUAZON
      @EPICJONTUAZON  8 ปีที่แล้ว +1

      +Brian Tano you're welcome brother!

  • @hauberty
    @hauberty 4 ปีที่แล้ว

    This is gold, thanks!

    • @EPICJONTUAZON
      @EPICJONTUAZON  4 ปีที่แล้ว

      👏👏👏 You're welcome! Please consider subscribing!

  • @Namudi2
    @Namudi2 3 ปีที่แล้ว

    Thanks man helped me alot

  • @Okuninushi-p1e
    @Okuninushi-p1e 3 ปีที่แล้ว

    Great job.

  • @Exphia
    @Exphia 5 ปีที่แล้ว

    i changed mine without taking off the bumper im just here to see how to take the bumper i gotta change ac condenser

    • @EPICJONTUAZON
      @EPICJONTUAZON  5 ปีที่แล้ว

      That's very impressive 👏🏼👏🏼👏🏼

  • @reeses2011cup
    @reeses2011cup 6 ปีที่แล้ว

    Awesome video very informative

    • @EPICJONTUAZON
      @EPICJONTUAZON  6 ปีที่แล้ว

      Teresa Fairley thank you! If you need any info let me know 🤘🏼😎

  • @luisperezrodriguez4007
    @luisperezrodriguez4007 4 ปีที่แล้ว

    Good one but next time show your work leds on

  • @jeffryjimenez07
    @jeffryjimenez07 7 ปีที่แล้ว

    Thanks man for this!

    • @EPICJONTUAZON
      @EPICJONTUAZON  7 ปีที่แล้ว

      Jeff Jaquez Jimenez you're welcome!

  • @junelsvtecturbo777
    @junelsvtecturbo777 5 ปีที่แล้ว

    thank you for the video

    • @EPICJONTUAZON
      @EPICJONTUAZON  5 ปีที่แล้ว

      You're welcome 🤙🏼🤙🏼🤙🏼

  • @josephhermans145
    @josephhermans145 7 ปีที่แล้ว

    Thanx was very helpfull!!!

    • @EPICJONTUAZON
      @EPICJONTUAZON  7 ปีที่แล้ว

      Marta Krawczyk 🤘🤘🤘🤘

  • @jmartinez5463
    @jmartinez5463 5 ปีที่แล้ว

    I wang to change my HID without having to take off the whole bumper

    • @EPICJONTUAZON
      @EPICJONTUAZON  5 ปีที่แล้ว

      I hope you have very small hands

    • @jmartinez5463
      @jmartinez5463 5 ปีที่แล้ว

      Why you say that ?

    • @EPICJONTUAZON
      @EPICJONTUAZON  5 ปีที่แล้ว

      @@jmartinez5463 try and change it without taking off the bumper

    • @jmartinez5463
      @jmartinez5463 5 ปีที่แล้ว

      EpicJonTuazon i did it, it takes patience more than anything all I did was jack up the car take off the plastic and did what you did

    • @EPICJONTUAZON
      @EPICJONTUAZON  5 ปีที่แล้ว +1

      @@jmartinez5463 ah I thought you were trying to replace the bulbs without taking the bumper off.

  • @drkshark
    @drkshark 5 ปีที่แล้ว +1

    Doing mine today thanks bro, give my videos on my tsx a look. I’ve got plenty 🎥

  • @bobratu9029
    @bobratu9029 3 ปีที่แล้ว

    you really don t have to remove the bumper.

    • @EPICJONTUAZON
      @EPICJONTUAZON  3 ปีที่แล้ว

      I'd like to see that! Please make a video!

  • @SpiritualChills
    @SpiritualChills ปีที่แล้ว

    Red tsxx? NCOICEEEEE

  • @Backtothehat
    @Backtothehat 6 ปีที่แล้ว

    Why not take it to a dealership... they won't do it??

    • @EPICJONTUAZON
      @EPICJONTUAZON  6 ปีที่แล้ว

      you'll probably have to pay an arm and a leg but im sure they would do it.

    • @moman007
      @moman007 6 ปีที่แล้ว

      it'll cost around 75$ for install at the dealership, and they charge you 225$ for one bulb...

  • @berberadventures
    @berberadventures 5 ปีที่แล้ว

    Great car . Shit design for what should have taken me maybe 10 minutes took me almost 2 hours on my ride. Anyway great vid it helped me out a lot

    • @EPICJONTUAZON
      @EPICJONTUAZON  5 ปีที่แล้ว

      Glad it helped. Def. sucks I agree, but a great car!

  • @nathanhale7444
    @nathanhale7444 8 หลายเดือนก่อน

    What a piece of crap! You shouldn't have to pull half the car apart just to replace a headlight bulb. It's a friend's car I'm reaserching installing new headlight housings but if it were my car it would be going up for sale as soon as the job was done.

    • @EPICJONTUAZON
      @EPICJONTUAZON  8 หลายเดือนก่อน

      I'm sure there's another way to do it, I just know it will be a half measure with a higher risk of something else going wrong.

    • @nathanhale7444
      @nathanhale7444 8 หลายเดือนก่อน

      @@EPICJONTUAZON I've watched a couple other videos and they show the same thing. It's a great video. Very informative so please don't think I'm dissing your video. Just the car itself and acura for building such a pos. 👍

    • @EPICJONTUAZON
      @EPICJONTUAZON  8 หลายเดือนก่อน

      It's all good I totally get it lol it's a PIA​@@nathanhale7444

  • @benq7617
    @benq7617 5 ปีที่แล้ว

    Fucking stupidest design ever. "Let's make it so you have to remove the bumper to change a headlight" almost as bad as Chrysler sebring battery

  • @bigkev26
    @bigkev26 2 ปีที่แล้ว

    Thanks bro.