HOW TO MAKE SOUND DELAY CIRCUIT | LIVE ECHO
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- HOW TO MAKE SOUND DELAY CIRCUIT
Hi friend in this video i have made a sound delay circuit which produces echos in the sound i hope you enjoy this video please like share and subscribe
Components:
1X PT2399 IC
1X BC547 TRANSISTOR
1X 100 OHM RESISTOR
2X 1K RESISTORS
4X 10K RESISTORS
1X 47K RESISTOR
1X 100K RESISTOR
2X 8.2nF CAPACITORS
6X 0.1nF CAPACITORS
2X 10uF CAPACITORS
1X 100uF CAPACITOR
1X AUDIO JACK
VERO BOARD
JUMPER WIRES
Circuit Diagram:
5V CIRCUIT
drive.google.c...
12V CIRCUIT
drive.google.c...
Previous videos:
• how to make mini cnc p...
• Let's Answer Your Ques...
• LET'S REPAIR IT | BENQ...
Very nice project.
Thanks for sharing your valuable experience.
The first video I find to explain it properly. Thank you very much (Obrigado! in Portuguese :-)
Hii sar aapki vedio mujhe bahut achchi lagi mera 1q h
Nice project 👍 very good
Exvellent Sir . Finally bna hi lya 😍
Bhai. Bohot mehant lagti hai. 2 hours ho gye abhi tak 😢 mujse sirf half components hi fill huye hai
इस सर्किट में कई गलतियां हैं। मुझे नहीं पता कि यह कैसे काम कर रहा है। वीडियो में दिखाए गए parts values भी गलत हैं। ट्रांजिस्टर BC547 कलेक्टर सर्किट में किसी भी चीज से जुड़ा नहीं है। कृपया इस वीडियो को ठीक करें और फिर से पोस्ट करें।
Hi, do you have any circuit diagrams that provide repeat sounds like 2 sec 5 sec 10 seconds? No delay or echo.
In Gujrat sound operators are used for Gujarati dayro.
'
coool nice home electronic project...
can use a 6 volts with a pack of four AA or AAA batterys
Does this really need a preamp or not? I just put this together on a dot board using a heckuva lot of circuit wires some good while ago (more than months!) and yesterday, I just hopped in to my desk to re-model it from scratch for a PCB. During the first phase, I tested this with a line input rather than a mic, although the output is bass-light, I was really impressed! I had a blast playing with the controls, the delay time knob was the funnest, also the output knob was also magnificent! At full blast, the echo out surpasses the input as a positive feedback as it should [I slapped in some pair of resistors to mix the dry signal (Actual source) with the wet (delayed) signal] and in its minimum position, it seemingly introduces a negative feedback that results in an endless (not earraping) tunnel-reverb-like effect too! However, with my homemade 3xC945 Dynamic preamp, I got a lot of noise. Hopefully, I've added a large heatsink onto the 7805 chip and with some sort of a highly-experimental grounding technique (either my body or some clothing iron tapped on the floor) the noise got reduced to some extent.
Yes it needs a pre-amp as the output signal is un-amplified and doesn't pass through an actual amplification stage. I think the whole Circuit here has no actual amplification but just alters the incoming signal on the effect and mix stage (dry or wet) but without any amplification. Try maybe 2 of these N5532 OpAmps both at the input stage and the output stage to get a louder signal.
@@KRAFTWERK2K6 yeah. That circuit he made just outputs the wet signal. So I'm starting with a delayed version of what I speak. I got around that using a resistor divider and connecting the dry signal again to the output leads eliminating the feedback. My mic preamp (uses 3 c945 transistors) is apparently too loud in addition.
Very good job u done,12volt DC par theek kaam krta hy Laikin mini circuit Jo ap ny use kiea hy Usk7 sound nai aya,mujhy 3.7v battery k sath operate honey wala bta dijiey,,aur 4440 ic k sath humming aur shor bhi krta hy
Very good job bhai🎉❤🎉
8.2nf capacitor ki jagah 33nf capacitor laga sakte hai kya
Nice zain bhai good job
thanks for your
Main ne ek Chinese speaker liya hai mic k saath (radio/USB/Bluetooth/mic). Masla ye hai k mic laganay par echo aatee hai jo band naheen ki ja saktee. Koi modification ho to bataen.
Good day, does the 50k potentiometer on the left is input volume and the center is delay? While the 10k pot. on the right is echo?
yes very good
Sir .which type i will connect in MIC. with AUX. dual controll dellay kit please replay me.
Is video me last me aap ne amplifier ka kanektion nahi bataya please bata dijiye mujhe 🥺🥺🙏🙏🙏
Dd3 jesa bana he kosis achhi thi
Sir Mujhe 8. 2 nanofared capasitor nehi mil rahi hain to uske jaga keya or capacitor use kiya ja sakta hain??? Or sir mujhe 8. 2 nanofared capasitor mili hain but wo 1600 volt ki hain keya wo use kiya ja sakti hain???? Please sir ekbar repla de dijiye Mujhe bohot dikkat ho rahi hain... 🙏🙏🙏
Muje 8 inch ka spekar chalana h air is me jo PRI h wo kitne volt tk chale g ziyada se ziyada
Very nice mere guru
Sir es project me kuch microseconds ka gap ho jara hai sound ampli se hoke speaker tk phuchne me esi disadvantage ko door krne k liye sound mixer ka use kia hai mene ye delay kisi b tarh door nhi hotaa normally practicals me
Está chulo 👌buena
Very good and useful video, I'm a loyal fan waiting for the next video, always successful
Bro
Cool my friend... Cool.
Es circut ma jo lala kalar hai 822 okiya chij hai maine saksej nahi huya piliz batayega
Thank's for video
Thanks bro Nice video
Sir transformerless power supply mein pf cap aur resistence ek doosre ke parallel mei hote hai .yeh kaise kaam karte hai jab isme ac ya dc input karte hai .kaise yeh output deta hai.aapne kaha hai ki yeh sirf ac par kaam karta hai.par maine dekha hai ek music sys mei 104j pf ke parallel mei laga hai.sir aapse request hai ispar vdo bana dijiye ki ispar pf cap aur resistence kya kaam karte hai.animated vdo bana dijiye.
Nice bro
You are intelligent bro
Assalam o alikum Bhai apne jo cirkit bnaya is me 8 inch ka spekar chale ga agar n to plz batae kese bane ga carkit
Agar 8inch speaker chalana h to amplifier bada use karo
सर इस सर्किट में हेडफोन लग सकता है क्या
Bhai ye circuit nana Kar mejhe de sakte ho?
THANK YOU 😍😍😍
Smart working
Sir Audio board ke supply kaha dena and circuit ko power supply kitni aur kaha dena please sir bolea it's a very important for this circuit
8 to 12 volt tak hon gye q Kay her ka yehe hote hai
Bhai ismein teeno potentiometer kis kis cheez ke hain?? Aur ismein Reverb bhi hai ya nahin?
?What does the first potentiometer(50k) do
Aapne last main jo amplifier board lagaya hai use ham dukan main kya kehkar maange
Veri good
Sir speekar ke pahle koun sa kit lga hai plz btaye
pam8403 amplifier
Please tell me 10k is repeat or delay
Speak se pahle koun sa kit lga hai uska name kya hai Sir
Qya is circuit me 12 volt 3 ampeare use kr skten h bhai.... Plz btaye
Esme left right chenal nikal skte he kya
Please reply🙏
Frind this surcit i make but echo does not working but mic is working what is the problem
Thank you.
Bhai koi karaoke sistam me kon kon si chije lagti hai jise batri aur bijli se bhi chala sake in sab ki jankari chahiye 200 watts me mujhe sterio,blututh,1 mid,1 tutter ,12 ench 1bufar ke sath banana chahta hu bhai kirpya Puri jankari par ek vedio banao please🎉❤🎉❤
Shistam me 🙋 mat lagoa saar. New lelo saar
ic jo he wo choti he jo bord me sett ni hori
or ek 8.2 ka cpacitor ni mikra yo iski jagah kya use kare
हाय केनीश मुझे एक बात पुछनी है क्या अगर ईसमे जो दो टाईपके केपेसीटर दीखाये है अगर ईनमेसे हमारे यहा नही मीलते है तो ऊसके जगह पर कोई दुयरा केपेसीटर लगा सकते है प्लीज ईतना जरूर जरूर बताईयेगा
धन्यवाद
जय शंकर
@@KiyanisLabथॅंक्यु केनीस भाई सुप्रभात
Banjos player hai to ye .echo chalega kya
Sar baki sab bana liya lekin 8.2nf nahi mil raha to kya lagao
Bhai 8.2 ki jagah 471 pf laga sakte he.
Mene lagaya he.
Nice video.
Karaoke board bana sakte ho kya
Nice app ka vdo
خواہ مخواہ ویڈیو کو اتنی لمبی لےگئےہو ایک ایک پُرزہ لگاتے ہو پھر اسکی پنیں کاٹتے ہو ایسے تو بہت وقت چاہیئے دیکھنےوالےکو اور سب کےپاس اتنا وقت نہیں ہوتا مختصربنایاکروتو سبسکرائب مزید زیادہ ہوں گے
Bro per aap ne bataya hi nai amplifier circuit kaha joint karna hai
Sir today I Subscribe your channel & I love your all projects . Sir I request you for make a mic amplifier circuit. On TH-cam many circuits are available and I make it but it's not work properly and humming sound comes so it's my request for make mic 🎤 amplifier circuit 🙏
8.2nf or 0.1uf k capacitors kitny volt k use krain gy?
Yaar Bhai ye to mono Hy is me stereo k Liye 2 ic lagani parain gi kia
yes
Sarje muze aisa amp batao jeska output may bass aur mid sound bhe aana chaiye ...bass aur mid sath hona
super video bro
Did u attached cond. Mic or dynamic mic
Sir ap si phone pa baat ho sacti ha kia
822 की जगह कौन सा pf लगा सकते है
Sir a circuit 3055 amplifier Ko connect karshakthe
yes kar sakte ha
Suuuper....
good job
8.2nF capacitor ki jaga pe 10nF capacitor use Kar sakte he??
Super ❤️
हाय केनीश गुड मॉरनीगं मेरा नाम दिलीप मोरे है मैने ये सरकीट बनाया और बनभी गया लेकीन ऊसमे सीटीकी अवाज बहोत आती है तो ऊसके लीये क्या करे प्लीज ईतना बताइये आपसे रीक्वेस्ट है
धन्यवाद
जय शंकर
Nice sir
Can i use capasitor 8.2nf green color?
Sir is ka delay or barhaya nh ja sakta or is me delay or max ya min karo to ajeeb awaz ati he
What is the replacement for the 822 capacitor?
Yes
103
103 pf or 10nf 0.010uf
Sir ye sound me echo dega ke mic me muje sound me Matlab ke song me echo chahiye ye iske liye hai curcuite?
Sir Rimot control 4 chenel 1 fen dimmer switch kayise banate he wo bataiye please
Nice video
Super
Capasitor kitna kitna volt
Can we use dynamic mic in this circuit?
yes you can use it
8.2nf mujhe kahi nahi mil raha to uski jagah kya lagao
Ahmedabad me redio market me miljayega Rs. 50 ke karib
Very nice
thanx bro
@@KiyanisLab 12v can work with 9v too?
Your this circuit diagram is wrong!!,,
BC547 first pin is collector
2nd pin is base.
3rd pin is emmitter., Emmitter is ground.ok
Base connection is also ok.
But out put signal of 547 is collector to connect 104pf(100NF) to gain control.
But you connected input base pin to connect to out put!!!! Fully wrong!!
Check it
Sahil connection bhi Bata dijiye. Maine ye PCB banaya par vo kaam nhi kar raha hai PLZZ.
Bhayi AP ne end per out pot or power ki tar kaha lgani he ye to btaya nhi
Audio out ,canection ta plz ki kore korbo bolben
Hello sir i make this circuit but not sound caming please output to wearing
Mana app ki video dhak kar carkit to bana liya par out put ki dosari wair kaha lagani ha ya pata nahi chal Raha hlp me plz
Sir ise 12 volt circuit me use kar sakte hai
Thanku sar
Is video me bahotsi koment he 8.2 pf nahi mil raha to uski jagah konsa lagaye.
Jab javab dena nahi to asi video kyo banate ho.
10p laga Len.
8.2nf (822) ki jagah 10nf (103) chalega
Nice
Is cerkit bord mujhe lena h please reply
output khase liya he
Negative or positive btao
100uf 16v pe lagasakte hai kya
Bhai 100 R aur 100 ohm resistor same hota hai?
Yes