Excellent video - concise and to the point. I wish other builders could post videos this way, instead of wasting our time with 'Part 8' and 'Part 9', with the model still not completed. Well done all around! Thanks for posting.
I doubt you're still watching comments on this video, but in case you do. I'm brush painting with acrylics, do you think I'll get away with not priming the small parts like you even though I'm not using airbrushed enamel/lacquer?
My next project is going to be a motorcycle. And I’m definitely leaning towards this one. Yours came out great. Can you easily take the plastic covering on and off to display the engine. Or is it covered for eternity?
Nice. I'm currently working on the same kit. I saw however you missed three things: decal Ducati logo front fender, decal on the red stand and the two footpegs ;-) But I guess you don't have these parts anymore, after two years
Hi Normally I paint in gloss color before clear coat. For matt color, I paint gloss clear on any color and then panel liner and finally matt clear coat again.
Hii how much did you spend in total to assemble this.model,including the paint and paint gun, basically all the required materials (and where u get them from). I am a newbie and would like to attempt building one of the motorcycle kits from tamiya!!
Hi, I think it would take a day to assemble and take more than twice times to paint including drying. You can easily find them at a any local hobby shop or internet like Andy's Hobby. Thanks.
@@plamodelstudio ohhh I see. Any tips for firdt time air brushing to paint the model? Like what are the other materials needed along with paints (eg. Paint thinner, primer etc)
Hi I'm starting to build this modal but I'm at a part where I don't know where is goes hope you an help me the part is C27 hope you can point me in the right direction many thanks Andy
![[Full build] Ducati 1199 Panigale S 1/12 (TAMIYA)](http://i.ytimg.com/vi/oMVq_z0A7fQ/mqdefault.jpg)
![ทัศนศึกษาโรงงานผลิตโค้ก [THAI/ENG SUB]](http://i.ytimg.com/vi/M9y-TJBNem0/mqdefault.jpg)
Отличная работа. Видео сборки супер. Я тоже собираюсь приобрести себе такую модель. Удачи в дальнейших проектах.
Excellent video - concise and to the point. I wish other builders could post videos this way, instead of wasting our time with 'Part 8' and 'Part 9', with the model still not completed. Well done all around! Thanks for posting.
I like both ways more detail for those who want to see how and all in one for those who prefer a single sitting overview.
An absolute joy to watch, I was captivated, even as an experienced modeller! Loved your use of wash to really makes those details pop!
Excellent video build. One of the best kits from Tamiya
I doubt you're still watching comments on this video, but in case you do. I'm brush painting with acrylics, do you think I'll get away with not priming the small parts like you even though I'm not using airbrushed enamel/lacquer?
I enjoyed watching from start up to last...i love tamiya😍😁
a tip: watch series at flixzone. Been using them for watching lots of of movies during the lockdown.
@Darren Idris Definitely, have been using Flixzone for months myself :)
Hi, what a great build. Just to check if u use the recommended paints or u have to reformulate ur own colors
My next project is going to be a motorcycle. And I’m definitely leaning towards this one. Yours came out great. Can you easily take the plastic covering on and off to display the engine. Or is it covered for eternity?
I have that kit, I think I´ll make it now because i didn't know hot to use Tamiya Polish Compund, nice job btw!
Super well built !!! I just ordered it and wanted to know if there were problems with the model or something I have to look out for?
She tuened out amazing great job 👍,, Keith
Thanks^^
Dam, looks freaking amazing.
So satisfying to watch.. attention to detail is impressive!
Thank you so much!
what a super crazy details.. cool.
Thanks.
Love it 😍😍😍
What a beautiful piece.
Thanks^^
beautiful vid, hope your channel grows.
Thank you very much!
Nice. I'm currently working on the same kit. I saw however you missed three things: decal Ducati logo front fender, decal on the red stand and the two footpegs ;-) But I guess you don't have these parts anymore, after two years
Nice work
I'm having the finger cot idea. That, is G E N I U S !
vERY GOOD!
Nice
It's a high level artwork
Superb build and quality photography. New sub from me 😊
Hi, nice work.. Did you clear coat parts before using panel liner or just straight over the paint?. Thanks
Hi
Normally I paint in gloss color before clear coat. For matt color, I paint gloss clear on any color and then panel liner and finally matt clear coat again.
Very clean and interesting video. I've noticed you don't use any primer coat before painting. Can you please confirm?
Hi, Normally I don't use a surfacer on any parts except body parts.
Don't you prime the small parts such as engine, exhaust pipes, etc?
Great stuff, by the way!
Nop
I just painted primer on bodies and metal parts.
@@plamodelstudio Nice! And apparently the paint sticks quite well, right?
Nice.
Thanks^^
Can i have all of your paint specific to completed this 1199s?
This is my first time to built this
Hi I'm going to be building the bike you have built on the video is it ok to ask questions and get tips if it's ok many thanks Andy
Good👍👍👍👍👍
so good
What do you use to clean the panel line accient off with?? Always been worried about using this but that looks nice
Enamel thinners
Che. Bello
Wow just direct spray on kit without primer
Do I need to buy spray paint? Or it’s optional?
Does the item comes with stock color? Thanks
Hi you need to buy tools and paints seperately.
23:50 Hi ! What types and brands of laquer super clear gloss do you use?
Thankyou!
music sounds like an AM radio
Can you please tell me all necessary tools you used?
😃😃😃😃😃
That looks great. What brand of paint did you use?
Hi, I use Tamiya lacquer paint.
@@plamodelstudio ...oh ok. Great, thanks very much.
Dulux paint, definitely!
@@liruizhu2146 :)
nice work. why didnt you drill the rotor holes?
Hi, I was not that skillful at this time. This was my fisrt bike model actually.
Does somebody know which paint set should I buy to paint my model? All I can find are general paint sets
I wish I could afford this kit
Can you get it built
Would you ever sell this model?
can you please give the buying link
Hii how much did you spend in total to assemble this.model,including the paint and paint gun, basically all the required materials (and where u get them from). I am a newbie and would like to attempt building one of the motorcycle kits from tamiya!!
Hi, I think it would take a day to assemble and take more than twice times to paint including drying. You can easily find them at a any local hobby shop or internet like Andy's Hobby. Thanks.
Need to try my hand building a motorcycle. never built one before.
I hope you make it someday soon.
Do I have to paimt them?
LANCE D. Yes you need to paint every single part.
@@plamodelstudio I thought it was like a gunpla
Purchase khaa se krna hai ye
Hi! Would you sell your finished model? Thanks in advance!
It's a shame all your beautiful attention to detail has to be covered up.
Donyou sell it?
It so good can I have it
Is the suspension working?
Nop
Which paint can change color on exhaust pipe？
Alumium color based then clear blue, clear yellow and clear red. Thanks^^
I tought tamiya come with color..just plug n play...this is ridiculous..so many color need to buy..with air spray..brush..hmm
Do you sell it?
Hi did you use acrylic or enamel paint
Hi, I used lacquer paint
@@plamodelstudio ohhh I see. Any tips for firdt time air brushing to paint the model? Like what are the other materials needed along with paints (eg. Paint thinner, primer etc)
First #600-800 sand paper work on a plastic part then #1000-1200 surfacer and painting.
Is the surfacer a primer or sandpaper?
I want one kit how can i buy it I'm from India
can u list all the colour that need to buy..
and tools also
Nice work. Why don't you sand the lacquer with sandpaper? polishing is not enough to see a fine semolina structure...
Hi, when I made this bike, I was just beginner and not so skillful^^
does it provide you with the necessary tools?
Only a screw driver included. You need to buy hobby tools.
Il. Panigale
Salam kena ya bang alex. Mau nanya nih beli nya di mana ya tuh motor2an nya bantu jawab ya bang makasih
Minat rakit motor juga Bang? 😁
T est trop fort ’mais ou sont les pistons ’moi j ai acheté un lego ,ducati et il sont la lalalalala!,,,!,,,,,,,,,
I want one of this bike but already build, can u help me with that please
yes , 150$
Where to buy?
You can buy any internet hobby shop. It's Tamiya product.
Can the wheel rotate?
Nop
@@plamodelstudio It should
Suspension can work or not ?
Jin Hao Lee
It doesn’t work.
@@plamodelstudio is all the model also can’t work？
Nop
@@plamodelstudio then what model can work it？
@@leejinhao5157 if you are looking for working suspension, check TSM brand for this particular model
一塌糊涂
Hi I'm starting to build this modal but I'm at a part where I don't know where is goes hope you an help me the part is C27 hope you can point me in the right direction many thanks Andy
Hi, C27 should be on before C43 and C29 are assembled. Please try it to be on one side first.
@@plamodelstudio thank you much appreciated
When you painted the forks for the bike did you go by the coulor in the book or you're own choice ?
9:09 NG. Wrong assembly
If that wasn't such a cheap display turntable, the bike would look real!