these are very in depth and at the prefect speed for someone on the workbench to reassemble their broken, dirty we/tm hi capa. this helped me a lot, thanks man!
I can't thank you enough arts airsoft. I've had a problem with my hi capa 4.3 for a good while and this video has proven to be a life saver for me keep up the good work.
these videos are great. had an issue with my hammer mech not working, and took it apart without knowing how these go together. found this series immediately and somehow fixed my issue without replacing a single part. amazing video, 10/10
Dude not a big fan of the non-explain vid, but I don’t care because your video saved my hi capa, totally thought I had busted it and had to take it somewhere but with your skills of airsoft I finally have it in one piece! Keep up the good work
don't worry get one and try it i got secondhand with bad condition, and i just try to diagnose it by diassemble it and manage to repair it but kjw ones is having terrible material.... and found out knocker disconnector that interface with slide broke too, and when i disassemble inner chassis, it broke too
Did the center leaf spring go under or over the sear (grip install portion of video) for this semi-auto TM Hi Capa series (seen at 9:59)? I only ask because I have a TM Xtreme .45 full auto and placing the leaf spring under the sear is not working out properly... thumb safety no longer engages and the hammer won't stay cocked/locked back along with the trigger not felling the hammer when depressed. I'm at a loss because I was informed the middle leaf spring arm should be placed under the sear when installing. This is not correct apparently and placing the middle leaf spring arm over the sear leaves me without full auto. I'm at a loss.
Hey just got done fiddling with my leaf spring configuration and I finally figured it out. Let me know if you still are having issues because it took me 2 hours of tedious and frustrating work lol
The hammer assembly stopped working for me. When I try to prime it, it just shoots back. When I pull the slide back and then release it the hammer releases with it, I have no idea what the issue is, please help
I was able to fix my problem, what happened, incase this happened to you was, on the sear spring (the silver piece with the 3 prongs on the grip) what happen is both of the long prongs should on top of the silver piece on the hammer and this black plastic piece next to the silver piece. Sorry if you don't understand what I'm saying its a little hard to describe it while typing
these are very in depth and at the prefect speed for someone on the workbench to reassemble their broken, dirty we/tm hi capa. this helped me a lot, thanks man!
Thank you very much for your support, it's what keeps us going!
here's a summary for yall
0:20 - valve knocker
2:40 - disconnector, hammer
4:40 - grip
5:57 - grip to the frame
7:20 safety
thanks for guide
I can't thank you enough arts airsoft. I've had a problem with my hi capa 4.3 for a good while and this video has proven to be a life saver for me keep up the good work.
I just want to say Thank You so much for your videos that helped me A LOT in building my first Hi-Capa (TTI/STI 2011 Combat Master)
BEST , REASSEMBLY, VIDEO, EVER!!!!!!
these videos are great. had an issue with my hammer mech not working, and took it apart without knowing how these go together. found this series immediately and somehow fixed my issue without replacing a single part. amazing video, 10/10
Dude not a big fan of the non-explain vid, but I don’t care because your video saved my hi capa, totally thought I had busted it and had to take it somewhere but with your skills of airsoft I finally have it in one piece! Keep up the good work
You realy save my life xD! Thank you bro, we need more people like you!
THANK YOU VERY Much, you helped me a lot with this video. I didnt know how to assembly it and tried it for multiple Hours.
this video save me so much cursing an frustration cheer mate
Still having trouble putting together even watching this, wish I never started 😂😂
don't worry get one and try it
i got secondhand with bad condition, and i just try to diagnose it by diassemble it and manage to repair it
but kjw ones is having terrible material.... and found out knocker disconnector that interface with slide broke too, and when i disassemble inner chassis, it broke too
Thanks for this vid...saves me a lot paying for what so called gunsmiths fee
you make this looks so easy!
thanks for these videos!!
Great video! helped me build 2 capas off spare parts! much love
Did the center leaf spring go under or over the sear (grip install portion of video) for this semi-auto TM Hi Capa series (seen at 9:59)? I only ask because I have a TM Xtreme .45 full auto and placing the leaf spring under the sear is not working out properly... thumb safety no longer engages and the hammer won't stay cocked/locked back along with the trigger not felling the hammer when depressed. I'm at a loss because I was informed the middle leaf spring arm should be placed under the sear when installing. This is not correct apparently and placing the middle leaf spring arm over the sear leaves me without full auto. I'm at a loss.
Hey just got done fiddling with my leaf spring configuration and I finally figured it out. Let me know if you still are having issues because it took me 2 hours of tedious and frustrating work lol
Great video, very helpful, took all the guesswork out
My god you are a life saver
Someone please help, what is the spring at 7:50 called???
прекрасное видео. очень мне помогло при ремонте моего пистолета. спасибо!
How did you get the back grip off
Does this video have sound because if so my phone will not play it
thanks alot sir. it is easier as expected, but still gratefull for the video ;)
The hammer assembly stopped working for me. When I try to prime it, it just shoots back. When I pull the slide back and then release it the hammer releases with it, I have no idea what the issue is, please help
I'm having trouble with the hammer locking back, every time I pull the hammer back it just flips forward automatically please help
I was able to fix my problem, what happened, incase this happened to you was, on the sear spring (the silver piece with the 3 prongs on the grip) what happen is both of the long prongs should on top of the silver piece on the hammer and this black plastic piece next to the silver piece. Sorry if you don't understand what I'm saying its a little hard to describe it while typing
Please check 3:06 parts hammer sear
Still can’t figure it out..
感谢你的教程
Any ideas of where I can get the plate that holds the valve knocker on?
I’m guessing la capa?
@@natemaskow4378 lol this comment was from before they were big. i ended up buying a for parts only 5.1 frame and took the plate from it.
thank you very much you help me a lot i have a question where i can i ask you
for more indepth questions you can email us on cs@artsairsoft.com, Thank you very much for your support, it's what keeps us going!
Nice vid, TY
I lost the spring in safety part, can anyone say what dimension that spring is or the name so I can buy the new one?
7:52 Spring ?
@@artsairsoft1585 yes but I just bought a longer one and adjusted it a little
Thank you
Hammer won't stay locked back...
No sound
Lost Thank you!!! 👍👍👍👏👏👏
Thank you!
best
where can i talk maybe in histogram or in twitter all in snap chat
for more indepth questions you can email us on cs@artsairsoft.com, Thank you very much for your support, it's what keeps us going!
for more indepth questions you can email us on cs@artsairsoft.com, Thank you very much for your support, it's what keeps us going!
your a god beat video
Love how the video is like "oh were going to do the leaf spring part" **does the rest of the internals skipping over the leaf spring**
@10:00 dude. He didn't skip it.
Merci
Get sound
Sabe with KJW