You have no idea how much time you saved me by providing this video. I was stuck in a tutorial from my school and this explained it clearly and concisely. Thank you!!!
Something I learned back in the IT days that helps to speed up copying file names, is hold hold shift, right-click and select 'copy as path'. Then you can paste the entire path with the file name all in one step.
My Brother, you can't imagine how i was struggling with this to just start the ec2 via ssh, the error which i was getting was with port:22, The moment you 've said about vpc/igw, there i figured out, igw(internet gateway), thank again.
Thank you so much for this. I was missing the Internet Gateway on a default EC2 Instance configuration. I spent 2 days on this thank you man. I was not thinking about my IG at all
The 500th subscriber, so very much appreciates your playlist about the fundamentals of AWS. Please make more for everyone can access the simple knowledge from you JasCloudTech. Thanks advanced
Thanks, my man! You sorted out something I was finding really insoluble. Its the part in the video where you talk about how the VPC should have an Internet Gateway attached with a status of "Active". I was getting timeout errors and could'nt understand what was going on because my security group had port 22 open. So on watching your video, I checked the Route Table and found the Internet Gateway in the VPC Route Table had a status of "Blackhole". The Internet gateway itself had a State of detached. I must have detached it when cleaning up resources. Anyways, after reattaching, the IG became active and I could SSH into the EC2 instance. Cheers! I would have had a hard time finding this on my own. I've subscribed and am looking forward to your next videos.
Wow that's is the great video ....i was spending couple of hours to connect to AWS instance by putty it is not worked ..after going through your video putty is not required so we can directly connect from cmd
@JasCloudTech Thank you so much for this. I was missing the Internet Gateway on a default EC2 Instance configuration. I spent 2 days on this thank you man. I was not thinking about my IG at all
Nice job. The private ip address is unique ? Safe to share ? I have homework but I am wondering if is safe to send homework that contains my private ip address
@Greykoff kindly check the VPC route table and Internet gateway status.... if not resolved you can communicate me on my email for troubleshooting the issue. :D
Hello thanks a lot for this. I have a question, you know how can i connect to ec2 using a ssh key without enter the username "ec2-user"? Im using ansible, and i want do it in my "when" condition or something like that, for different linux distribitions like ubuntu and centos. Thanks. 😊
@J’aime thanks … I haven’t worked on ansible … you can go through www.middlewareinventory.com/blog/add-users-to-ec2-instances-with-ssh-access-ansible/ .. I hope it will give you some idea …
@@ankitachauhan5832 kindly check the the user have access permission for the location where the .pem key is saved.. if issue persists kindly share screenshot on my email jaspalsaini45@gmail.com
@sahil … first thing check inbound rules in the security group (port 22)and have you restarted Ec2 it might change your public dns..and check also routing table …route to internet gateway…
Hello.. I have created Ubuntu Ec2 instance in my windows system and I am trying to connect Aws Ec2 instance from command prompt but I am getting connection timed out error..Can anyone please help me on this!
@priyatalakola r u saying you installed Ubuntu on ur windows os by downloading Ami or you are launching in console… if igw, inbound is fine check ur subnet … if u need troubleshooting session you can schedule zoom or teams meeting and send on my email will resolve the issue
@dambrudhar check user type default is ec2-user -- the location where the key is make sure you have read access for the operating system that you are using … right click properties check … -- under action- ssh client check the user (ec2-user default ) - last use ssh -v -i……….. to debug the error
@@JasCloudTech i followed eevrything here and i still get this error "ssh: connect to host port 22: Connection timed out" . i checked/added necessary inbound rules as well.
You have no idea how much time you saved me by providing this video. I was stuck in a tutorial from my school and this explained it clearly and concisely. Thank you!!!
@Ryan glad to know …. 😊 🙏
@JasCloudTech Great video. Thanks. Have a question, trying to now connect my VPN to my ec2 and use it as a Hotspot. Is it possible?
@@DIZZLEBOI44 you can .. take care of security group inbound outbound , ip forwarding NAT and also DHCP in order to assign ip to devices 😀
Something I learned back in the IT days that helps to speed up copying file names, is hold hold shift, right-click and select 'copy as path'. Then you can paste the entire path with the file name all in one step.
Thanks for the suggestion 🎉 … I try to keep the video as basic as possible and all my videos are on the go without editing… 😊
thanks
My Brother, you can't imagine how i was struggling with this to just start the ec2 via ssh, the error which i was getting was with port:22, The moment you 've said about vpc/igw, there i figured out, igw(internet gateway), thank again.
@khaderuddinwaseemmohammed … thanks 🙏
Thank you so much for this. I was missing the Internet Gateway on a default EC2 Instance configuration. I spent 2 days on this thank you man. I was not thinking about my IG at all
@theguru5768 welcome 🙏… great to know .. my video resolved your issue … please do like share my videos… thanks for watching 😊
The 500th subscriber, so very much appreciates your playlist about the fundamentals of AWS. Please make more for everyone can access the simple knowledge from you JasCloudTech. Thanks advanced
Thanks for the support… definitely more videos on the way 😊… keep supporting…
@@JasCloudTech for sure, keep as simple as possible, I like you a lot
@@tuhuynh2232 sure Thanks 😊
Thanks, my man! You sorted out something I was finding really insoluble. Its the part in the video where you talk about how the VPC should have an Internet Gateway attached with a status of "Active". I was getting timeout errors and could'nt understand what was going on because my security group had port 22 open. So on watching your video, I checked the Route Table and found the Internet Gateway in the VPC Route Table had a status of "Blackhole". The Internet gateway itself had a State of detached. I must have detached it when cleaning up resources. Anyways, after reattaching, the IG became active and I could SSH into the EC2 instance. Cheers! I would have had a hard time finding this on my own. I've subscribed and am looking forward to your next videos.
@Steve thanks for your support and kind words 🙏... more video’s coming soon 😊
Wow that's is the great video ....i was spending couple of hours to connect to AWS instance by putty it is not worked ..after going through your video putty is not required so we can directly connect from cmd
👍 you can also check ec2 access using putty th-cam.com/video/n19qIUEPqQw/w-d-xo.htmlfeature=shared
Hello, thanks for this video tutorial. Its helpful. But you didn't show how you created the route tables and internet gateways?
Hi Michael .. by default route table and internet gateway gets created . Thanks for watching.. please do like and share 🙏
Sir after create instance public ipv4 address showing blank
@ramyarajendran check route table having route to internet gateway..
You are the best of the best of the best of the best... ! :)
@Maria 😊 thanks 🙏…
@JasCloudTech Thank you so much for this. I was missing the Internet Gateway on a default EC2 Instance configuration. I spent 2 days on this thank you man. I was not thinking about my IG at all
@Richard … that’s great … thanks 🙏 for watching… 😊
Thank you for your clear explanation
@ushat welcome 🙏…😊
I checked the Igw and inbound rules…but still I am getting timed out error
hi thanks for the video , do you know where i can find the username for windows machine?
@acoruzzi .. for windows default is administrator | EC2 instance lost keys or Access? | or something else...
Nice job. The private ip address is unique ? Safe to share ? I have homework but I am wondering if is safe to send homework that contains my private ip address
It’s safer … traceable by other devices in your network… private Ip are not directly connected to internet… 😊
@@JasCloudTech thanks for the inputs. I appreciate it.
thx it finally works that sheeeeett
sry, I'm little drunk rn
🍻🥂
Thanks, really helpful video!
@Tine thanks for watching ☺️
HI what is next? How can I access the files using the command prompt?
Hi @pinotes you can use the linux commands --> ls , cat ……. Thanks 🙏 for watching…
I use Ubuntu there , it shows me permission denied publickey., same issue
@tanveerkaurbenipal6862 Make sure user have access permission to .pem file and username ubuntu
You said by default user should be ec2-user. My image was Ubuntu and it didn't work, changed to Ubuntu as user and it worked
Very helpful..
Glad it was helpful! 😊
Thanks with helping me. Take you care - if you have a some free time you can help me with English practice :) also
thank you very very much sir
Welcome… thanks for watching.. do like share my videos
Все делаю как по вашей инструкции но не могу соеденится по ssh.
What should i do ? Im already did instructions but cant get a result.
@Greykoff kindly check the VPC route table and Internet gateway status.... if not resolved you can communicate me on my email for troubleshooting the issue. :D
Hello thanks a lot for this.
I have a question, you know how can i connect to ec2 using a ssh key without enter the username "ec2-user"?
Im using ansible, and i want do it in my "when" condition or something like that, for different linux distribitions like ubuntu and centos.
Thanks. 😊
@J’aime thanks … I haven’t worked on ansible … you can go through www.middlewareinventory.com/blog/add-users-to-ec2-instances-with-ssh-access-ansible/ .. I hope it will give you some idea …
@@JasCloudTechThanks, i Found my hapiness 🎉
Thank you bro and subscribed you :)
Welcome … thanks for supporting 😊
The cmd shows "WARNING: UNPROTECTED PRIVATE KEY FILE!". What should I do in this case?
@danish update the permission for private key file to only allow read access for current user
@@JasCloudTech where do I update this?
@@danishwais2701 kindly share the screenshot at jaspalsaini45@gmail.com ..
@@JasCloudTech iam. Not. Able. To. Do. It.. Sir.. It is showing permission denied (public key)
@@ankitachauhan5832 kindly check the the user have access permission for the location where the .pem key is saved.. if issue persists kindly share screenshot on my email jaspalsaini45@gmail.com
Thank you very much
@srikanth thanks 🙏 for watching…
I'm getting a warning: unprotected private file! when I try to ssh into my ec2.
Grant read only permission for pem file to current user …
Thank you for vídeo!
@marechalff 🙏 welcome…
Please do like share … thanks for watching 😊
very valuable thank you
,
Welcome Aly .. please do like share and subscribe to my channel.. thanks for watching
Am i suppose to download Ubuntu on my system before i can use my cmd
@josephokwudi no need to download Ubuntu or anything on your system ..🤗
'ssh' is not recognized as an internal or external command,
operable program or batch file. why ithis error come wen submit ssh key
May I know the OS version
Why im getting error saying connection timed out
@prasannajitlenka check the inbound rule port 22 is allowed ??
@@JasCloudTech I got the problem it was restricted in our college lan
Connection timed out error but why
@sahil … first thing check inbound rules in the security group (port 22)and have you restarted Ec2 it might change your public dns..and check also routing table …route to internet gateway…
it says permission denied (public key)
Please check the ec2 access role assigned.. if issue Persists let me know
how to use ec2 if i have pem key
@niluthonte can you elaborate … in the video I am using pem key to connect … ..using public dns …
Ok
thanks mate
@montagrus … welcome 🙏
Hello.. I have created Ubuntu Ec2 instance in my windows system and I am trying to connect Aws Ec2 instance from command prompt but I am getting connection timed out error..Can anyone please help me on this!
@priyatalakola r u saying you installed Ubuntu on ur windows os by downloading Ami or you are launching in console… if igw, inbound is fine check ur subnet … if u need troubleshooting session you can schedule zoom or teams meeting and send on my email will resolve the issue
Did any one get solution how to connect if u receive Permission denied
@dambrudhar check user type default is ec2-user
-- the location where the key is make sure you have read access for the operating system that you are using … right click properties check …
-- under action- ssh client check the user (ec2-user default )
- last use ssh -v -i……….. to debug the error
"Bad permissions. Try removing permissions for user: BUILTIN\\Users on file" getting this
icacls "C:\path\to\file_or_directory" /remove "BUILTIN\Users"
Else first remove inheritance
cd C:\path\to\your\pem\file
icacls your-key.pem /inheritance:r
Grant read access
icacls your-key.pem /grant:r "%username%":R
hahaa, thank so much
🫨. 😀 welcome 🤗
How to connect reverse from EC2 instance to Local Machine?
Can anyone tell.
@royalstars8229 you mean to say you want to set up hybrid network .. Aws ec2 & your on premises network
You can go ahead with Direct Connect and VPN..
How can I log out
Exit 😊
No... I mean I'd like to restart the process without it saying that I was logged on before
@@jadiel_jade I m sorry I am unable to understand your question… can you please elaborate 🙏 😊
COOL
@massyl thanks 🙏 for watching 😊
How to run PuTTY ssh
Download putty … download .pem file and then use the putty interface add auth.. use ec2-user for Amazon Linux
Make a video using putty also
@sreedevan sure …
@@JasCloudTech from existing instances
I keep getting an error said permission denied (publickey) somebody help 😢
@kritta does you user has ec2 access role assigned ..
@@JasCloudTech I’m quite not sure where I could check on that.
@@krittanails8965 select ec2 under details you can check .. if possible share the screenshot on jaspalsaini45@gmail.com
@@JasCloudTech I'm having the same issue, it says (publickey) after permission denied in the CMD prompt
@@Moment-Driven kindly check the user has ec2 access role assigned… if issue persists kindly let me know
did not work
@ayanikabera can you please let me know what’s the error … timeout .. access denied , check inbound rule port 22 , igw…
@@JasCloudTech i followed eevrything here and i still get this error "ssh: connect to host port 22: Connection timed out" . i checked/added necessary inbound rules as well.
@@ayanikabera7060route table and internet gateway ?? After creation did you restarted your instance ??
@@JasCloudTech yes route table and internet gateway were exactly what you showed in your video. i did not restart instance.. i did refresh it...
@@JasCloudTech okay i rebooted.. still getting the same error
Thank you😍
😊 🙏