Window Regulator Fix Weld Mercedes W124 C124 E220 M111.960

แชร์
ฝัง
  • เผยแพร่เมื่อ 6 ก.ย. 2024
  • Window would not close, about 1cm gap from it being fully closed rattling like mad.Clearly missing teeth of the window regulator.

ความคิดเห็น • 30

  • @bennett4949
    @bennett4949 2 ปีที่แล้ว +1

    Great repair! And better then buying a new or a used one!

  • @robyd7581
    @robyd7581 5 หลายเดือนก่อน +1

    hi, incredible repair. But can you explain how to register the glass to close perfect like your?

    • @iamgeorge1146
      @iamgeorge1146  5 หลายเดือนก่อน

      Thank you Roby! To be honest, I do not remember. Trial and error for 1 hour. Put a battery charger on the car and a lot of moving the window up down. Also compared the possition to the other side door.

    • @domantir
      @domantir 5 หลายเดือนก่อน +1

      Thank you

  • @mercedeske
    @mercedeske 4 ปีที่แล้ว +1

    Great job. I have no power windows on my W124 but I'm thinking about the conversion. I would like to install them on my car. Cei mai buni gerarduri....👍🏻👍🏻👍🏻💪🏻💪🏻💪🏻😉😉😉🍺🍺🍺

    • @iamgeorge1146
      @iamgeorge1146  4 ปีที่แล้ว +1

      Multumesc domu 😍
      New uploads coming!!!

  • @faridfarid7517
    @faridfarid7517 2 ปีที่แล้ว +1

    The screw for that you have asked is one of 2 screws for adjusting the low stop (how deep will the window go down)

    • @iamgeorge1146
      @iamgeorge1146  2 ปีที่แล้ว +1

      Thank you so much for the answer 😁

  • @wajidrashid8517
    @wajidrashid8517 3 หลายเดือนก่อน

    Hi George what a amazing repair.
    Today my c124 mercedes front window went down but did not go back up.
    I swapped the switches around and it didn't work. Then I took door panal off and gave motor live and earth but it didn't go up or down.
    Do you think I need a new motor ? Or a regulator to?
    Thanks George your advice is appreciated 👍🏻

    • @iamgeorge1146
      @iamgeorge1146  3 หลายเดือนก่อน

      Thank you for the kind words! I would assume the motor is broken as I did gave mine live off the car and it worked.

    • @wajidrashid8517
      @wajidrashid8517 3 หลายเดือนก่อน +1

      @@iamgeorge1146 thanks for the reply George, did you give your motor live when it was in the car in the door?
      Or should I remove motor and regulator then check if motor is broken?
      Where can I buy the motor? Eurocarparts ?
      Thanks George
      Ps yours is the only video on whole of Internet for c124

    • @iamgeorge1146
      @iamgeorge1146  3 หลายเดือนก่อน

      @@wajidrashid8517 In my situation, before taking anything off, I could hear the motor working, and grind noise without the window moving. That meant that the motor was working just the teeth were used.

    • @wajidrashid8517
      @wajidrashid8517 3 หลายเดือนก่อน

      Thank you George, yes i tried live direct to motor but nothing, no noisr no sound no movement, tomorrow i will raje out regulator and buy new motor and fit back .​@@iamgeorge1146

  • @VioUk
    @VioUk 5 ปีที่แล้ว +1

    Good job 👏 👏👏👏

  • @wajidrashid8517
    @wajidrashid8517 3 หลายเดือนก่อน

    Was your motor ok ? As mine isn't moving up or down

  • @ysfgncy
    @ysfgncy ปีที่แล้ว +1

    Does anyone know that w124 coupe has window dropping?

    • @iamgeorge1146
      @iamgeorge1146  ปีที่แล้ว

      I have checked my W124 and the window dose not drop when opening the door. It must have a different design that I am not aware of, some say it os the way they designed the seal around the body where the door closes. The CLS windows do drop when opening the door and they have a sensor, switch for that.

  • @ZaherHedjazi
    @ZaherHedjazi 4 ปีที่แล้ว +1

    Could you help me out plz , I bought a rivet gun and rivet 4.8 mm but it was too small, could u plz provide me a link with the correct rivets and rivet gun ? Thank u

    • @iamgeorge1146
      @iamgeorge1146  4 ปีที่แล้ว +1

      Hi my friend :)
      The rivet gun I used www.amazon.co.uk/dp/B000O51WMQ
      And 6.4 rivets x 18mm
      www.amazon.co.uk/dp/B07JPCGMNB

    • @ZaherHedjazi
      @ZaherHedjazi 4 ปีที่แล้ว

      @@iamgeorge1146 thank u very much

  • @zibi1988pl
    @zibi1988pl 5 ปีที่แล้ว +1

    I just weld them back on and grind them a bit :) no template LOL

    • @iamgeorge1146
      @iamgeorge1146  5 ปีที่แล้ว +1

      Awesome! Yeah, you can do that too. I guess they dont need to be perfect. I was afraid they might break off or smth 😂

  • @Valdemar1
    @Valdemar1 2 ปีที่แล้ว

    Same problem here

  • @Beechams1042
    @Beechams1042 2 ปีที่แล้ว

    Hi there
    The passenger side window on my c124 has stopped working - so I will need to look at he regulator and the motor.
    Before I do, what do the rivets do? What do they hold in place? And are they essential?

    • @iamgeorge1146
      @iamgeorge1146  2 ปีที่แล้ว

      Hello and wellcome 😁 from what I remember they hold the window regulator assembly fixed to the door skin.

    • @Beechams1042
      @Beechams1042 2 ปีที่แล้ว +1

      @@iamgeorge1146 Would screws or bolts work to refit it? Or will it have to be rivetted back in?
      Thanks for the video btw!

    • @iamgeorge1146
      @iamgeorge1146  2 ปีที่แล้ว

      I am sure some people replaced the rivets with bolts but I found it easier to just get it riveted back.

    • @wajidrashid8517
      @wajidrashid8517 3 หลายเดือนก่อน

      Hi Beechams the exact thing happened to me today, I put my passenger window down and it didn't go back up. I then shaped switches around and no luck. I have took off door card and there is a black and green wire going to the motor and I have fed those wires with live and neutral direct. but window don't go up or down .
      I'm a bit stressed and it's made my anxiety go through the roof 🙈