As a carpenter of 10 years now I can say without hesitation that a lot of these things will not be directly taught. Most of the learning I've experienced has always been watching someone do something and then being expected to just figure it out. To have a channel like this that takes time to teach skilled trade practices and tips is really amazing.
This guy is giving away YEARS of hard won work tips for free. Amazing. I don't even want to call these "tips" because it makes them sound trivial. This stuff is solid gold for working men. I'm a millwright and I even picked up a ton of useful things. Best channel on youtube. Period.
I agree with you on that one. These are tricks of the trade that take a man 30 to 40 years to aquire. If you're in the field or just need to not look like an idiot holding a tool, I suggest you watch all the videos that this man offers. I'm a mechanic by trade but his videos are a must watch.
Great points. One problem with getting the advanced class up front is that the years it took you to learn handling the saw to begin with, is what gave you the experience to make the plunge cuts, polish planes, miter-less rips etc. So learn these pure gold saw techniques, however give yourself the time to learn the saw before attempting them.
Perfect for small projects. Not got a lot of power so if the wood starts to flex it stops the saw pretty easy. Use it for small tasks and you will be happy. Safety system Works great th-cam.com/users/postUgkxjpBI8OOeUXib_iT7UomCrQ-uauwZJ62c .lose your grip on the saw it shuts off and the sheath closes over exposed saw.
I am a trim carpenter who on occasionally needs to frame. My latest project was a 2 story cape. It took my 2 days to frame the ground floor deck. After I found this channel it took me 4 hours to frame the second floor deck. Thank you Essential Crafstman!!
"You can also rip like this..." No. No, sir, I cannot. YOU can rip like that. I learned a lot watching this that I will definitely use in the future. But, like my very smart brother once said "knowing how a thing is done is not the same as knowing how to do it. If it were we'd all be journeyman bricklayers." Thanks again for these great, direct and down to earth lessons.
I did some construction work 30 years ago and there were a few greats like this I knew. There are quite a lot less of these older professionals left. “This isn’t a hobby folks”. He is good. We should all endeavor to be this good in our own professions.
That’s when I walk away for a few days. I have these huge French doors I need to hang and tried twice. That was about a month ago. I don’t even want to look at them. Time to call a real carpenter.
Draw two lines for the width of the blade's carbide teeth. Either buy have a calipers to measure the teeth width or look up the blade manufacturer carbide teeth width. Add the width of the carbide teeth onto the end of the cut for the second line and cut inside the two lines. If you only have one line and are freehanding it it's easy to stray two millimeters either side of the line (thats a 1/4 in variable line.) A good way to know if you're straying is feeling the blade binding and wearing down the sides of your circular saw blade. The only way I figured this out was screwing up my own projects 😅
I’ve watched this a few times to refresh my understanding of some of these advanced skills and I am always amazed. My brother is a master carpenter, but it wasn’t until recently that I truly understood and appreciated the complexity and sheer guts it takes to do this job.
I've been a carpenter for 35 years and it is very obvious that this man knows what he is doing and is well practiced in his craft. Most of the cuts and techniques he used should not be attempted unless you are absolutely sure of what you are doing. He is definitely right about one thing...............a circular saw demands respect because if you don't respect it it will bite the hell out of you with no conscience whatsoever!! Awesome demonstration though!!!
Renegade Wa some of these tricks we learn it in Romania in the trade school,about 20 something years ago,when we were about 14 years old. The teacher was an old fella with a very old Bosch skill saw in his set. Nowdays,the idiots chop their fingers even with a rail plunge saw.. which,should be 100% safe with the hands above the work surface
You've got that right... I could spend a few hours on most power and machine tools - that's hours per tool / machine - going over the dangers. Basically, it comes down to knowing you tools, planning your work, then working your plan... And, knowing when to *not* try something, even when you think that it should work... the benefits just aren't worth taking unnecessary risks...
do you wish to manufacture my saw? I invented a "Parallel Guided Power Saw" which can be seen on you tube and can carry any saw on the market and can cut lumber and boards. 4 ft is for jobs away from home. 8 ft is a little heavier and 18 ft is just for shop. to transport you can disassembly into pieces. It has 3 parts: Saw unit, Guide unit, and table, I invented it in 2012 and all the USA companies and Bosch company declined to license from me my say. Bosch wrote that my saw is not good for the market. By contrary is the best because everybody would like to buy my saw, but those companies shall retire almost all of their tools such as sliding saw, table saw, drill press, router table. Bosch did a wonderful design for their sliding saw but kept an old feature of 12 inch cut length. How can they not to see that the length of cut is the most important. The precision of my saw is great and moves very easily on the guide and carry also the heavy dust collector. I need somebody to manufacture with me my saw.
Excellent instruction video Scott! Its apparent that you know how to use a skillsaw, but you also know how to put together the lesson in a logical progression. I appreciate that you dont make it about you, you're not on a soapbox, no big ego here having a good time telling everyone how your way is the best and putting down others in the process. These videos are refreshing in their simple straight forward style of showing and explaining a new subject to many, in a manner that teaches the viewer. Well done, i look forward to more. Thanks for sharing your knowledge with us. Andy
I watched my father who was a carpenter do just about all these techniques over the years. It's great to see this information passed on to others. Thank you sir!
Once upon a time the zen master of carpentry looked at his skillsaw and told it, "You're a planer" The skillsaw argued, NOOO I'm a saw. The zen master then took the saw, planed a surface with it, drilled a hole with it, demo'd with it, mitred with it, cut an 8x8, then a notch then a rabbet. Then he carved Michelangelo's David 23 times in the rafters freehand, each one exactly the same as the last. Finally he patted the saw affectionately and had it do a dance suspended in mid air on its cord. The saw smiled and knew it was the luckiest tool on earth.
These are great tips! I learned these by the 8th grade working in my families construction business. My dad is a home builder and architect and taught me everything I know from excavation, surveying, concrete, rough and finish carpentry you name it! Now in my 30s and still using them regularly!
I first watched this video 5 years ago, just to pick up some extra skills before a project. This was the first Essential Craftsman video I had ever seen, and I've never stopped watching since. The amount of things I've learned, both from watching these video, and from my own experience, in those 5 years is astounding. I can honestly say that I wouldn't be the person I am today, if I had never decided to watch this single video. Thank you for everything.
I've done almost everything you can do with wood for the last 30 years. I sat through this and kept saying "wow that was cool". Never think you're old enough not to learn something new. I did. Well done straight to the point and kept it moving. Loved it.
Back in the early 1980’s, my buddy and I ran a crew of carpenters. The six of us framed over 200 houses in about a year and a half. Absolutely the best time of my life in my 20’s. This video brought back all those good memories and great feelings from that time. Thank you.
Love the Chain Stitch on the cord! My Dad was a builder all his life, he passed away last yr, I have been racking my brain trying to figure out how he did that! Thank You So Very Much! Love your videos! You are a truly an efficient craftsman. Thanks for sharing all your wisdom. He was all about his skilsaw, just like you. He didn't take time to change saws, he could frame and build most anything with his skilsaw, hammer and nails...
I have never heard of the term polish plane . I always called it dragging the saw . I was called into look at some lower cabinets built off site that were 1/4 " too big . Nobody knew what to do including myself. Taking the cabinet apart would be a HUGE loss . I came up with the idea to " polish plane " 1/4" off of one end entirely . Everyone started laughing at me and the boss didn't find it humorous . He asked if anyone had a better idea ? The answer was no . It took me about an hour and the cabinet was in . You would be so AWESOME to work with . I've been binge watching your videos . Thank You for sharing your passion and knowledge .
Can you imagine showing this video at an insurance company event? Or to a bunch of bureaucrats? There wouldn't be enough smelling salts to wake all of them after they passed out...lol. Great skills my friend. Nice shop too.
Nickolay Pelov How can these techniques "literally" kill unless you actually slice someone up with the saw. Please explain why Americans misuse the word 'literally'.
This video made my "workshop" possible. I acquired a circular saw on a whim and then watched this video to learn how to use it. Most of what the video contains does not apply to me, but the techniques on notching and the polish plane have become the single most used method in my shop. We've combined this with a circular saw crosscut jig and made hundreds of tables, stools, shelves, and several Giant Chess Sets using the notching and planing techniques learned here. Thank you Sir!
I finally figured out why I love your channel: I grew up with a grandfather and father who were tradesmen. My father and I fell out when I was younger, but as a kid I spent plenty of time helping them out with various tasks, learning from them. I didn’t get as much time as I’d have liked doing that with either of them, and my grandfather’s health was such that I didn’t get as many opportunities as I’d have liked, especially when, as a man, I realized the value of those lessons and the time spent with him. Now that my grandfather has passed on, I can continue my education and be able to put skills to practice and pass on these lessons to my children. Thanks again!
Fantastic video for skilled veterans like myself. I learned my trade from two old school Virginia carpenters and they were as fast and accurate as you say. You have to know when you can take a short cut whether it is over cutting birds mouths or stair carriages. The older I get the more perfect I want everything.I tend to frame like I am cutting trim. Good news my work is perfect, bad news not making much money because it takes too long. Love your videos Essential Craftsman, keep them coming.
@@davidschwartz5127 I think it's a common trait among "craftsmen" - so if you have that problem, congrats! you should probably consider calling yourself a "craftsman", because (in my opinion) there are way too many cowboys out there with no pride in their work giving the title "tradesman" a bad name. I like to think of myself as a craftsman (even though I'm only a hobbyist). I don't think I could ever make a decent living as a tradie: at least not without seriously re-wiring my brain to make productivity, rather than millimetre-perfection, the thing I aim for instinctively. Being fast/productive and precise enough for the intended purpose is definitely the sign of a true *professional* craftsman - instead of some weekend amateur like me who can turn out some very nice work given laughably large amounts of time.
Love this guy, he doesn't spend half the video telling us to wear eye protection and generally treats his viewers like adults who can make those decisions on our own.
I've been using a circular saw since I was a kid, an I've never had too much of an issue. Wind and working over your head. I might agree. If I do get something in my eye, its at the end of the day when I take my shirt off.. I'm always a lot more worries about not being able to see what I'm doing because my glasses are fogging up @James Mara
I started a trades apprenticeship after covid wiped my industry. At the ripe old age of 35. This channel along with my work crew has been a absolute boon of excellent information. I am incredibly grateful to all who make this channel happen.
Every single person new to construction should absolutely watch this guy's vids! He is among the best of the best of teachers for one thing. He is very highly skilled and very intelligent. Lastly,his ease of operation makes it fun to watch! I really hope people new to construction watch these vids!
When I first learnt to use a skill saw as a boy, my great grandfather had me build a shed with him using his personal saw. He was an old timer who didn’t believe in the guard & as I grew older I started buying tools & I to removed my guard just because that’s how I learnt. I was building a deck the other month & someone borrowed my saw & I warned them about the guard & I see them make the cut & everything is normal until I hear the noise which sends shivers down my spine, the sound of a skill saw skidding across the deck & ruining all the boards. I did it as a boy & never did it again & I don’t think that this man will ever do it again either. I’m always thankful for my grandfather for teaching me how to build things. He was a good man, you remind me a lot of him & I believe that is why I love your videos. Thank you
I appreciate that he addresses the "ugliness" and that some home owners wouldn't want some of the techniques doing. There's a lot of people who are worried / even frightened by tradesmen - I think having them watch this would put a lot of people at ease.
I have used a polish plane before, guiltily, thinking it's propably something that's terrible for the machine and the blade and should never be done. Tickled to know it's actually a pro tip (and I still propably shouldn't do it yet on my skill level...) I appreciate this channel so much for little details like this. Handtools get romanticized enough that theres all kinds of hobbyists documenting and sharing information, but not a lot of people are on this level of practical mastery with power tools and willing & able to share online.
in my experience, and mind you thats only with millwrights and industrial contractors, there are the groups that work as safely as possible, and there are groups that work reasonably safe. the outfits that stand around and worry about safety all day are still in their hourly safety meeting while the outfits that get it are packing up. and the ones that get it usually do a much nicer job, because they dont let some far fetched safety hazard scenario get in the way of getting a job done the right way.
@@ryann5247 read my mind the tradesman/ the individual is key .... some people are not meant x this specially self appointed-"entitled" beurocrats backpedaling
@onelove well, safety is up there, but no one treats it as 'first', no matter how far up the corporate chain you are. In the vast majority of cases, safety 'first' would mean not doing the job at all, even if it's shuffling papers.
Many thanks to a man seasoned enough to know how, and young enough to put it on youtube. Tips like these get lost if not recorded. He deserves all the best for passing on his knowledge to those willing to learn.
A wise old man once asked me; "what is profit", I of course responded with some technical financial response, but he quickly responded with what I found to be a pretty profound statement. He said: "Profit is your reward for taking risk". These techniques reminded me of this lesson I had learned so long ago, and while too much risk, can be dangerous, taking risks while carefully understanding what the risk is, can prove quite profitable. great video!
I have no immediate application for these skills but I felt if I didn’t watch this all the way through that I would no longer be able to call myself a man.
The amount of knowledge this guy forgets on a daily basis is more knowledge than 98% of the Carpenters I have worked with throughout my life have. Not only does he have the knowledge he is a tremendous Craftsman. You should extend further from TH-cam videos and if any network sees this video give you a show. Honestly everything from the production of the video to the content is 100% professional and probably the best TH-cam channel I've come across. I am a finish Carpenter by trade and I could watch these videos for the rest of my life. From one Craftsman to another great job and keep up the good work. This helps more people than you would ever know.
Was looking for comment on "Polish plane," and saw you added term "Irish screwdriver." "Politically correct" is not a term I embrace; however, I am sensitive to expressions that, though innocent, may be offensive to others in some way. I know we live in a different time and most of us have a chip on our shoulder, just waiting for someone to "diss" us. Maybe Stan Musial wouldn't have been offended by the term, and since I'm not Polish, I guess I shouldn't be disturbed. I know there was no intent to hurt anyone, no inside joke meant to get others snickering. I don't know - I guess I just don't like to see anyone disrespected even in a carefree ( vice careless) way. Just me.
@@Brennan009 - Yeah, I remember when our cadre sergeants used to bark at us while marching, "Sound off like you got a pair!" But I learned a long time ago that having testicles doesn't make you a man. A lot of so-called "men" don't have a problem hitting women and I don't have much respect for them. I hope you're not one of 'em.
Scott, your wielding of that Skil Saw is both terrifying and awe-inspiring. If it takes 10,000 hours of practice to become a master, I'm guessing you've used a Skil Saw for at least 20,000 hours!
This was the first of your videos I came across, some months ago now. I thought I was pretty good with a skill saw until I saw these demonstrations and realised I know nothing at all. I've enjoyed what you've shown immensely (and duly subscribed of course) Now I'm going through the spec house build series. It's been a lifelong ambition to build my own house with my own hands. I'm getting close. Maybe next year. I've got a lot to learn, and no doubt most of the lessons will come from applying myself to the task; but your channel is proving to be both a great inspiration and a great source not only of the skills that I need to gain and improve on, but of the things I never thought about. Thank you for the effort.
@@nayosilver1180 well considering a girl on my crew watches his videos I don't think it's for men only mate. Unless your saying women can't be in the trades or use tools
One of the BEST overall how to use videos ever! Thank you for the tips! I’ve used circular saws for almost 30 years. Now it seems I have clarification, and definitely more safety awareness of my tools and better understanding of my home and work projects. Thank you!
Good stuff. As a pro Framer I can wholeheartedly endorse all these tricks of the trade as I use them all. Additionally , the dialogue at the end is spot on. We make it look easy , but there is serious technique in what we do. thank you for making this.
I have watched most of your videos and find them very interesting and you make learning fun. I saw this video a long time ago but never use any of your trick until today. I was making a railing around a deck and had to cut many boards the same length. You video about measure once, cut many times. So I measured once and cut 5 boards. Checked them. Close enough. Finished the railing in no time. Great trick. Thanks Andy
My dad and his two brothers were carpenters from about the age of 13 until they died. My dad was the only one of the three NOT missing a finger joint. It was an important lesson for me.
You truly are the master craftsman to the highest level! Thanks for taking the time to show us the skills less than .02% of journey level carpenters might display. What an amazing gift you have, along with an amazing speaking ability!
I just want to express my gratitude and appreciation for the essential craftsman. I really respect your approach, not to mention your diction and general thoughtfulness in describing a task or tip. You’ve opened up a world for me which has otherwise been off limits. Thank you for helping me go from hobbyist to DIYer to carpenter to general contractor.
Plenty of guys out there with decades of experience - but not everyone can provide quality instruction. This gentleman is a top level teacher. Thank you sir for your willingness to pass on these skills.
I’ve never seen anyone move a circular saw like that I often have to use a guide to get a square straight line lol. They don’t teach us like these old boys anymore loved this video thanks for taking the time to make it and share your secrets. God bless
I wish every one of my framers watched your videos. I think I am actually going to use them for training. Your work and skill is amazing. You exemplify what framing carpentry and true grit in construction mean. Guys have lost what it means to be “professional”.
Thank you. Watched this more than 10 times since few years back. I bought a circular saw because of this video and started doing a lot of work for my own business. There are joy listening to you and watching the spec house coming along.
I'm a professional carpenter and use these tricks all the time in rough framing since 1975 when I first when in apprenticeship. Please beware these are for professionals only ... But the pros knowing saw kick back and how there saw reacts have no problems using them. I have never had a accident using them and I always respect the saw it will kick sooner or later be ready. One of my old metal handle (35yrs old) saws has a 16d nail holding the guard open that I put in there 30 yrs ago. If OSHA shows up on a track I was working I could remove and drop the guard in a sec. I feel the guard is more of a safety hazard requiring a carpenter to use one hand to make a plunge cut or polish plane. One of the best videos on proper saw usage that the pros use everyday. This 65 yr old retired stacker loves this video.
Larry Haun, much as I respect him, figured that cutting within a quarter inch was fine for framing. As a predominately finish carpenter, I wish to follow framers that hold a closer tolerance. Makes my life so much easier.
Been a Carpenter 51 years 69 years old. I love your videos. Just yesterday I used a Skillsaw with a sweet blade and cut a tabletop I had glued up with the underside up with a straight edge clamped. Makes a beautiful cut. In this case you go slow and start flat, not tilted with guard shimmed. Skillsaws do come in handy for finish work too.
Norwegian carpenter here, been working wood for 12 years but some of your techniques were new to me. It was also an amazing watch, you are pretty good with that tool.. some of your angled length cuts were rediculous. Stuff I would never even think about trying with a skillsaw. I would have to break out the desk saw(? unsure of the word for this tool). But amazing show of skill there. I am sad to say we very rarely use skill saws with a power cord anymore. Its all battery powered, makita or hitatchi. Not enough power in the battery for some of those tricks. I still enjoyed the video a lot though.
Close :) desk saw = Table saw for 45 rips. But that was impressive worked with a guy in Cape Cod I was a dumbass for not paying more attention that man was on comparable level as a framer and saw wielder I think his name was Manning. There are some really skilled craftsman in US.
my friend you have just saved me so much time on my jobs. even my boss was impressed, and he's been a carpenter for over 30 years. ive been doing contruction for about 7 years now. thank you
I have used a sidewinder for years. Its what I learned on. After watching this guy I went out and bought a skilsaw worm drive. My cuts have been quicker, cleaner and more accurate than ever before. I don't think I will ever go back.
So, yeah, I didn't realize that I didn't truly know how to use my freaking circ saw. This video sort of blew my mind. I feel like I just gained about a months worth of knowledge from being on a job site. Thank you so much for sharing this type of info!! I'm going to watch your entire series...subscribed.
I'm sure I speak for a lot of educated professionals out there when I say I have incredible admiration and more than a little jealousy at the professionalism, level of knowledge and satisfaction with the job. A gifted man in his career and his ability to demonstrate it. Thank you so much for the knowledge. Most firms charge by the hour!
Have you seen how quick and effortlessly he cuts and breaks certain things with his hands? He reminds me of an old builder mentor I had who all my friends believed was just beyond human with how strong he was
I could see Ivan Miranda do that... He has a knack of using Screwdrivers as Hammer substitutes... He does it so much he's started censoring his own footage when using an actual hammer because of necessity.
I have watched this video a handful of times and it is so much more than a skill saw tutorial. You are learning about lumber, speed square, framing square, jointing (mortise, birds mouth), marking for processing wood, how to use saw horses, using your body to secure wood for different cutting operations, storing your tools.... I could go on an on.
![[ TEASER ] เงาะป่า - วงL.กฮ. | TMG RECORD](http://i.ytimg.com/vi/M4ObdFfcPww/mqdefault.jpg)
As a carpenter of 10 years now I can say without hesitation that a lot of these things will not be directly taught. Most of the learning I've experienced has always been watching someone do something and then being expected to just figure it out. To have a channel like this that takes time to teach skilled trade practices and tips is really amazing.
That freehand skills alone take years and years of practice
I've seen guys carpenter before, this guy carpens at another level
This guy is giving away YEARS of hard won work tips for free. Amazing. I don't even want to call these "tips" because it makes them sound trivial. This stuff is solid gold for working men. I'm a millwright and I even picked up a ton of useful things. Best channel on youtube. Period.
I agree with you on that one. These are tricks of the trade that take a man 30 to 40 years to aquire. If you're in the field or just need to not look like an idiot holding a tool, I suggest you watch all the videos that this man offers. I'm a mechanic by trade but his videos are a must watch.
I agree, I also have 30yrs experience and wish I had access to these techniques at my beginning. Many today don’t share or pass them down.
Caution. Don't try at home.
Great points. One problem with getting the advanced class up front is that the years it took you to learn handling the saw to begin with, is what gave you the experience to make the plunge cuts, polish planes, miter-less rips etc. So learn these pure gold saw techniques, however give yourself the time to learn the saw before attempting them.
Amen
This guy looks like a rocket scientist but instead he's one of the best carpenters I've ever seen. Respect!!
Wow, a youtube video with actual information, delivered quickly with zero waffle! I think I could cry tears of joy.
Yeah....usually all pussies do.
I'm sure it will be removed.
This guy has a massive amount of knowledge and experience and he delivers it with such a great manner that makes you want to listen to him all day
Perfect for small projects. Not got a lot of power so if the wood starts to flex it stops the saw pretty easy. Use it for small tasks and you will be happy. Safety system Works great th-cam.com/users/postUgkxjpBI8OOeUXib_iT7UomCrQ-uauwZJ62c .lose your grip on the saw it shuts off and the sheath closes over exposed saw.
I am a trim carpenter who on occasionally needs to frame. My latest project was a 2 story cape. It took my 2 days to frame the ground floor deck. After I found this channel it took me 4 hours to frame the second floor deck. Thank you Essential Crafstman!!
"You can also rip like this..." No. No, sir, I cannot. YOU can rip like that. I learned a lot watching this that I will definitely use in the future. But, like my very smart brother once said "knowing how a thing is done is not the same as knowing how to do it. If it were we'd all be journeyman bricklayers." Thanks again for these great, direct and down to earth lessons.
I did some construction work 30 years ago and there were a few greats like this I knew. There are quite a lot less of these older professionals left. “This isn’t a hobby folks”. He is good. We should all endeavor to be this good in our own professions.
He probably shaves in the morning with "The polish plane"
Most definitely
Sure, make sure you are willing to be the rat of his lab.
He says with the Polish plan it'll be a better finish than you could ever do
Id just slam the residue with a hammer anyone else??
"the Polish plane...it's somewhat dangerous" POLSKA!!!
He may shave with it, but can he squat with it?
How i cut wood. Measure 3 times, mark my cutting lane, then measure 2 times more, then cut, realize i made a mistake and start all over again.
me too
Same
That’s when I walk away for a few days. I have these huge French doors I need to hang and tried twice. That was about a month ago. I don’t even want to look at them. Time to call a real carpenter.
Draw two lines for the width of the blade's carbide teeth. Either buy have a calipers to measure the teeth width or look up the blade manufacturer carbide teeth width. Add the width of the carbide teeth onto the end of the cut for the second line and cut inside the two lines. If you only have one line and are freehanding it it's easy to stray two millimeters either side of the line (thats a 1/4 in variable line.) A good way to know if you're straying is feeling the blade binding and wearing down the sides of your circular saw blade. The only way I figured this out was screwing up my own projects 😅
@@viewer-of-content but i already did my choice, this is my routine and im not changing it! :D
I’ve watched this a few times to refresh my understanding of some of these advanced skills and I am always amazed. My brother is a master carpenter, but it wasn’t until recently that I truly understood and appreciated the complexity and sheer guts it takes to do this job.
I've been a carpenter for 35 years and it is very obvious that this man knows what he is doing and is well practiced in his craft. Most of the cuts and techniques he used should not be attempted unless you are absolutely sure of what you are doing.
He is definitely right about one thing...............a circular saw demands respect because if you don't respect it it will bite the hell out of you with no conscience whatsoever!!
Awesome demonstration though!!!
Renegade Wa some of these tricks we learn it in Romania in the trade school,about 20 something years ago,when we were about 14 years old. The teacher was an old fella with a very old Bosch skill saw in his set. Nowdays,the idiots chop their fingers even with a rail plunge saw.. which,should be 100% safe with the hands above the work surface
You've got that right...
I could spend a few hours on most power and machine tools - that's hours per tool / machine - going over the dangers.
Basically, it comes down to knowing you tools, planning your work, then working your plan...
And, knowing when to *not* try something, even when you think that it should work... the benefits just aren't worth taking unnecessary risks...
know your tools, plan your work, work your plan.
I like that.
Renegade Wa n
d.i.y people stay away from doing this work you will end up in A and E THIS MAN MAKES IT LOOK EASY he is a pro.... good advice stick to painting etc
"Good fast professional work is beautiful and people can afford it." Great wisdom.
do you wish to manufacture my saw? I invented a "Parallel Guided Power Saw" which can be seen on you tube and can carry any saw on the market and can cut lumber and boards. 4 ft is for jobs away from home. 8 ft is a little heavier and 18 ft is just for shop. to transport you can disassembly into pieces. It has 3 parts: Saw unit, Guide unit, and table, I invented it in 2012 and all the USA companies and Bosch company declined to license from me my say. Bosch wrote that my saw is not good for the market. By contrary is the best because everybody would like to buy my saw, but those companies shall retire almost all of their tools such as sliding saw, table saw, drill press, router table. Bosch did a wonderful design for their sliding saw but kept an old feature of 12 inch cut length. How can they not to see that the length of cut is the most important. The precision of my saw is great and moves very easily on the guide and carry also the heavy dust collector. I need somebody to manufacture with me my saw.
charge just as much as you think they can afford, then add 10%
Excellent instruction video Scott!
Its apparent that you know how to use a skillsaw, but you also know how to put together the lesson in a logical progression. I appreciate that you dont make it about you, you're not on a soapbox, no big ego here having a good time telling everyone how your way is the best and putting down others in the process.
These videos are refreshing in their simple straight forward style of showing and explaining a new subject to many, in a manner that teaches the viewer. Well done, i look forward to more. Thanks for sharing your knowledge with us.
Andy
Jep, not everyone with skills is a good teacher. One of the reasons i enjoy those videos so much.
I watched my father who was a carpenter do just about all these techniques over the years. It's great to see this information passed on to others. Thank you sir!
Once upon a time the zen master of carpentry looked at his skillsaw and told it, "You're a planer" The skillsaw argued, NOOO I'm a saw. The zen master then took the saw, planed a surface with it, drilled a hole with it, demo'd with it, mitred with it, cut an 8x8, then a notch then a rabbet. Then he carved Michelangelo's David 23 times in the rafters freehand, each one exactly the same as the last. Finally he patted the saw affectionately and had it do a dance suspended in mid air on its cord. The saw smiled and knew it was the luckiest tool on earth.
haha thats fucking hilarious man !!!
Love it, You're text gave me a giggle. Yes he is a master of carpentry, definitely will try some of his skills.
. . . then the foreman fired him for screwing around on the job!
You are zen master of writing. Wonderful.
That was beautiful
These are great tips! I learned these by the 8th grade working in my families construction business. My dad is a home builder and architect and taught me everything I know from excavation, surveying, concrete, rough and finish carpentry you name it! Now in my 30s and still using them regularly!
I first watched this video 5 years ago, just to pick up some extra skills before a project. This was the first Essential Craftsman video I had ever seen, and I've never stopped watching since. The amount of things I've learned, both from watching these video, and from my own experience, in those 5 years is astounding. I can honestly say that I wouldn't be the person I am today, if I had never decided to watch this single video. Thank you for everything.
I've done almost everything you can do with wood for the last 30 years. I sat through this and kept saying "wow that was cool". Never think you're old enough not to learn something new. I did. Well done straight to the point and kept it moving. Loved it.
Irony: He's wearing a soft cast on his foot. No injuries from wild saw maneuvers, but did step on grandson's LEGOs
Probably lost his foot then
*Cuts through nails*
"See, didn't hurt the saw at all. Tough on the nails though." Lol as a carpenter myself I have nothing but respect for this guy.
Even a special nail-cutting carbide tipped blade will be quickly ruined going against cut nails. Old flooring has them.
This guys so great. He doesn’t just say or only mention tips or techniques. He shows each and every bit of it. Wish more guys were like him.
This is how maestros and teachers grandmasters should teach not get mad you don't know.
Back in the early 1980’s, my buddy and I ran a crew of carpenters. The six of us framed over 200 houses in about a year and a half.
Absolutely the best time of my life in my 20’s.
This video brought back all those good memories and great feelings from that time.
Thank you.
While listening to Michael Jackson? Hee hee
Me too, and we used every one of these methods, I don't want to call them tricks, it was just the way you did them, fast and good!
Ya,, them days are over for me,,,20... was 40 years ago... can we find anybody to work half as fast and good ...............
Love the Chain Stitch on the cord! My Dad was a builder all his life, he passed away last yr, I have been racking my brain trying to figure out how he did that! Thank You So Very Much! Love your videos! You are a truly an efficient craftsman. Thanks for sharing all your wisdom. He was all about his skilsaw, just like you. He didn't take time to change saws, he could frame and build most anything with his skilsaw, hammer and nails...
Yes, me too. About 12.50
@@Daviddickson,
"... I have been racking my brain trying to figure out how he did that!"
It never occurred to you to ask?
It’ll be in sewing book same method
I'd love to work with this guy. Imagine the knowledge and experience he has.
I have never heard of the term polish plane .
I always called it dragging the saw .
I was called into look at some lower cabinets built off site that were 1/4 " too big .
Nobody knew what to do including myself.
Taking the cabinet apart would be a HUGE loss . I came up with the idea to " polish plane " 1/4" off of one end entirely . Everyone started laughing at me and the boss didn't find it humorous .
He asked if anyone had a better idea ?
The answer was no .
It took me about an hour and the cabinet was in .
You would be so AWESOME to work with .
I've been binge watching your videos .
Thank You for sharing your passion and knowledge .
Wow!!! 25 Videos in 1... I am exhausted 😴!
Incredible amount of information & Decades of Experience found here! Thank You for the Education!!
Can you imagine showing this video at an insurance company event? Or to a bunch of bureaucrats? There wouldn't be enough smelling salts to wake all of them after they passed out...lol. Great skills my friend. Nice shop too.
I don't know about the insurance company but it'll literally kill the competition :)
jim lauhon the United states has 320 million, add Canada and Mexico population to that number.
Nickolay Pelov How can these techniques "literally" kill unless you actually slice someone up with the saw. Please explain why Americans misuse the word 'literally'.
Mark Daniel gluing
some literally iliterates?
This video made my "workshop" possible. I acquired a circular saw on a whim and then watched this video to learn how to use it. Most of what the video contains does not apply to me, but the techniques on notching and the polish plane have become the single most used method in my shop. We've combined this with a circular saw crosscut jig and made hundreds of tables, stools, shelves, and several Giant Chess Sets using the notching and planing techniques learned here. Thank you Sir!
I finally figured out why I love your channel: I grew up with a grandfather and father who were tradesmen. My father and I fell out when I was younger, but as a kid I spent plenty of time helping them out with various tasks, learning from them. I didn’t get as much time as I’d have liked doing that with either of them, and my grandfather’s health was such that I didn’t get as many opportunities as I’d have liked, especially when, as a man, I realized the value of those lessons and the time spent with him. Now that my grandfather has passed on, I can continue my education and be able to put skills to practice and pass on these lessons to my children. Thanks again!
I'm a 3rd generation Detroit Carpenter. You sir are an absolute BEAST with a circular saw, thanks for the tips.
There are no carpenters in Detroit man.
Fantastic video for skilled veterans like myself. I learned my trade from two old school Virginia carpenters and they were as fast and accurate as you say. You have to know when you can take a short cut whether it is over cutting birds mouths or stair carriages. The older I get the more perfect I want everything.I tend to frame like I am cutting trim. Good news my work is perfect, bad news not making much money because it takes too long. Love your videos Essential Craftsman, keep them coming.
It must be a common trait among tradesmen, I have the very same problem.
@@davidschwartz5127 I think it's a common trait among "craftsmen" - so if you have that problem, congrats! you should probably consider calling yourself a "craftsman", because (in my opinion) there are way too many cowboys out there with no pride in their work giving the title "tradesman" a bad name.
I like to think of myself as a craftsman (even though I'm only a hobbyist). I don't think I could ever make a decent living as a tradie: at least not without seriously re-wiring my brain to make productivity, rather than millimetre-perfection, the thing I aim for instinctively.
Being fast/productive and precise enough for the intended purpose is definitely the sign of a true *professional* craftsman - instead of some weekend amateur like me who can turn out some very nice work given laughably large amounts of time.
I really enjoy your teaching style, word choice and use of language.
Props to all the fellow tradesmen out here trying to learn as much as possible to be the best you can be in your trade!
Love this guy, he doesn't spend half the video telling us to wear eye protection and generally treats his viewers like adults who can make those decisions on our own.
AwaitingTheMeteorOfDoom I know right
@James Mara no need to be coarse
I've been using a circular saw since I was a kid, an I've never had too much of an issue. Wind and working over your head. I might agree. If I do get something in my eye, its at the end of the day when I take my shirt off.. I'm always a lot more worries about not being able to see what I'm doing because my glasses are fogging up @James Mara
@James Mara What your problem?
If no one has said so, your cameraman is getting the necessary shots. Mad props cameraman Joe!
Indeed
Hi I'm 78 years old and thought I knew most of the tricks and short cuts but you just showed me a few and woke up my memory on some . Thanks George
Jamman Where the hell you been all your life old man ??? Under a rock ???
I started a trades apprenticeship after covid wiped my industry. At the ripe old age of 35. This channel along with my work crew has been a absolute boon of excellent information. I am incredibly grateful to all who make this channel happen.
I'm done... 45° rip free-hand??? Jeez. I'm still happy when my lines are straight
shit who you telling
dude is a monster
A great example of a "DO NOT TRY THIS AT HOME" moment. I was very impressed by that one and wouldn't try even with enough experience.
@@KnightsWithoutATable no x ams
See, it's that easy. Wtf
I've watched this video so many times. It makes me grin from ear to ear every time. I'm blown away by Scott Wadsworth's skills.
Every single person new to construction should absolutely watch this guy's vids! He is among the best of the best of teachers for one thing. He is very highly skilled and very intelligent. Lastly,his ease of operation makes it fun to watch! I really hope people new to construction watch these vids!
"Now, that's ugly, but there are a lot of applications."
Story of my life.
Funny. :)
hoilst &
now thats funny
hoilst life or wife? lol
hoilst h
When I first learnt to use a skill saw as a boy, my great grandfather had me build a shed with him using his personal saw. He was an old timer who didn’t believe in the guard & as I grew older I started buying tools & I to removed my guard just because that’s how I learnt.
I was building a deck the other month & someone borrowed my saw & I warned them about the guard & I see them make the cut & everything is normal until I hear the noise which sends shivers down my spine, the sound of a skill saw skidding across the deck & ruining all the boards. I did it as a boy & never did it again & I don’t think that this man will ever do it again either.
I’m always thankful for my grandfather for teaching me how to build things. He was a good man, you remind me a lot of him & I believe that is why I love your videos. Thank you
I appreciate that he addresses the "ugliness" and that some home owners wouldn't want some of the techniques doing. There's a lot of people who are worried / even frightened by tradesmen - I think having them watch this would put a lot of people at ease.
I have used a polish plane before, guiltily, thinking it's propably something that's terrible for the machine and the blade and should never be done. Tickled to know it's actually a pro tip (and I still propably shouldn't do it yet on my skill level...)
I appreciate this channel so much for little details like this. Handtools get romanticized enough that theres all kinds of hobbyists documenting and sharing information, but not a lot of people are on this level of practical mastery with power tools and willing & able to share online.
Grab your cordledd multitool. Cleaner. Quicker. Safer.
I would hire this man with 100% confidence that he’s doing a true professional job!
Scott you are a real educator! Your teaching skills are equal to your carpentry, blacksmithing and welding skills!! Keep posting, i'll keep watching.
1.This dudes a beast!
2.This dudes an osha nightmare.!!
3.This dudes how middle AMERICA was built!!!
in my experience, and mind you thats only with millwrights and industrial contractors, there are the groups that work as safely as possible, and there are groups that work reasonably safe. the outfits that stand around and worry about safety all day are still in their hourly safety meeting while the outfits that get it are packing up. and the ones that get it usually do a much nicer job, because they dont let some far fetched safety hazard scenario get in the way of getting a job done the right way.
@@ryann5247 read my mind
the tradesman/ the individual is key .... some people are not meant x this
specially self appointed-"entitled" beurocrats backpedaling
@onelove well, safety is up there, but no one treats it as 'first', no matter how far up the corporate chain you are. In the vast majority of cases, safety 'first' would mean not doing the job at all, even if it's shuffling papers.
If anyone see this. click my name to watch son of perdition. this is thousands of years in the making and most were deceived. I wasnt
osha nightmare lol
thanks still after 26 years i have learned some new tricks.great work thanks for posting
Thank you I’ve been a carpenter for 2 years now going on 20 and there’s a few tricks I was really impressed by gonna save me time on Monday
Many thanks to a man seasoned enough to know how, and young enough to put it on youtube. Tips like these get lost if not recorded. He deserves all the best for passing on his knowledge to those willing to learn.
A wise old man once asked me; "what is profit", I of course responded with some technical financial response, but he quickly responded with what I found to be a pretty profound statement. He said: "Profit is your reward for taking risk". These techniques reminded me of this lesson I had learned so long ago, and while too much risk, can be dangerous, taking risks while carefully understanding what the risk is, can prove quite profitable. great video!
I have no immediate application for these skills but I felt if I didn’t watch this all the way through that I would no longer be able to call myself a man.
@J Hemphill man you're killing me with kindness.
Lol
Love the honesty i came here to call out the bullshit if i see it.
😂😂😂 Good one
lol
HEY! .. I'm Polish ................. and I APPROVE of that planer !!!
The amount of knowledge this guy forgets on a daily basis is more knowledge than 98% of the Carpenters I have worked with throughout my life have. Not only does he have the knowledge he is a tremendous Craftsman. You should extend further from TH-cam videos and if any network sees this video give you a show. Honestly everything from the production of the video to the content is 100% professional and probably the best TH-cam channel I've come across. I am a finish Carpenter by trade and I could watch these videos for the rest of my life. From one Craftsman to another great job and keep up the good work. This helps more people than you would ever know.
The "polish plane" 😂😂
My workmate calls his hammer the "irish screwdriver"
Was looking for comment on "Polish plane," and saw you added term "Irish screwdriver." "Politically correct" is not a term I embrace; however, I am sensitive to expressions that, though innocent, may be offensive to others in some way.
I know we live in a different time and most of us have a chip on our shoulder, just waiting for someone to "diss" us. Maybe Stan Musial wouldn't have been offended by the term, and since I'm not Polish, I guess I shouldn't be disturbed. I know there was no intent to hurt anyone, no inside joke meant to get others snickering. I don't know - I guess I just don't like to see anyone disrespected even in a carefree ( vice careless) way. Just me.
scarfing is the term bra
@@cedricgist7614 lol man grow a pair.
@@Brennan009 - Yeah, I remember when our cadre sergeants used to bark at us while marching, "Sound off like you got a pair!" But I learned a long time ago that having testicles doesn't make you a man. A lot of so-called "men" don't have a problem hitting women and I don't have much respect for them. I hope you're not one of 'em.
My foreman calls his hammer's claw his "scaffold saw"
I've seen a lot of pro tips on internet that aren't pro. As a carpenter for 20 years, this is real pro - I wouldn't do half this stuff. Guy is amazing
Scott, your wielding of that Skil Saw is both terrifying and awe-inspiring. If it takes 10,000 hours of practice to become a master, I'm guessing you've used a Skil Saw for at least 20,000 hours!
This was the first of your videos I came across, some months ago now. I thought I was pretty good with a skill saw until I saw these demonstrations and realised I know nothing at all. I've enjoyed what you've shown immensely (and duly subscribed of course) Now I'm going through the spec house build series. It's been a lifelong ambition to build my own house with my own hands. I'm getting close. Maybe next year. I've got a lot to learn, and no doubt most of the lessons will come from applying myself to the task; but your channel is proving to be both a great inspiration and a great source not only of the skills that I need to gain and improve on, but of the things I never thought about. Thank you for the effort.
I love how you admit the chain stitch is actually a crochet stitch! You are an awesome sawman.
Chill out lady!!....this is not Tinder ok.
This is a man's video!!
Do you think you could belittle a little better?
@@nayosilver1180 well considering a girl on my crew watches his videos I don't think it's for men only mate. Unless your saying women can't be in the trades or use tools
That's why it's called a "Skill Saw." Great video. Well done.
FACTS!!
One of the BEST overall how to use videos ever! Thank you for the tips! I’ve used circular saws for almost 30 years. Now it seems I have clarification, and definitely more safety awareness of my tools and better understanding of my home and work projects. Thank you!
Good stuff. As a pro Framer I can wholeheartedly endorse all these tricks of the trade as I use them all. Additionally , the dialogue at the end is spot on. We make it look easy , but there is serious technique in what we do. thank you for making this.
6:33 Holy cow, only thing left is to see how he uses the saw to shave
He calls that one the Samoan Knife.
haha- I saw this comment because I paused at exactly 6:33 to see what people had to say.
Efficiently, that's how. Now get back to work!
I have watched most of your videos and find them very interesting and you make learning fun. I saw this video a long time ago but never use any of your trick until today. I was making a railing around a deck and had to cut many boards the same length. You video about measure once, cut many times. So I measured once and cut 5 boards. Checked them. Close enough. Finished the railing in no time. Great trick. Thanks
Andy
My dad and his two brothers were carpenters from about the age of 13 until they died. My dad was the only one of the three NOT missing a finger joint. It was an important lesson for me.
My God I can listen to and watch this man all day! Thank you for being such a professional expert. Truly fascinating.
This guy is very quick and very knowledgeable, years of experience, thank you for sharing your knowledge.
You truly are the master craftsman to the highest level! Thanks for taking the time to show us the skills less than .02% of journey level carpenters might display. What an amazing gift you have, along with an amazing speaking ability!
I just want to express my gratitude and appreciation for the essential craftsman. I really respect your approach, not to mention your diction and general thoughtfulness in describing a task or tip. You’ve opened up a world for me which has otherwise been off limits. Thank you for helping me go from hobbyist to DIYer to carpenter to general contractor.
It’s so nice having a video of tips being call tips and not hacks. Also this guy is a stud
This Video is one of the BEST EVER, in the history of Earth, and everybody should WATCH THIS VIDEO!!!
probably the best 19 minutes and 1 second on you tube.
Plenty of guys out there with decades of experience - but not everyone can provide quality instruction. This gentleman is a top level teacher. Thank you sir for your willingness to pass on these skills.
I’ve never seen anyone move a circular saw like that I often have to use a guide to get a square straight line lol. They don’t teach us like these old boys anymore loved this video thanks for taking the time to make it and share your secrets. God bless
This is brilliant. Straight to the point, quick demonstrations. Well done.
I wish every one of my framers watched your videos. I think I am actually going to use them for training.
Your work and skill is amazing. You exemplify what framing carpentry and true grit in construction mean. Guys have lost what it means to be “professional”.
Thank you. Watched this more than 10 times since few years back. I bought a circular saw because of this video and started doing a lot of work for my own business. There are joy listening to you and watching the spec house coming along.
I'm a professional carpenter and use these tricks all the time in rough framing since 1975 when I first when in apprenticeship. Please beware these are for professionals only ... But the pros knowing saw kick back and how there saw reacts have no problems using them. I have never had a accident using them and I always respect the saw it will kick sooner or later be ready. One of my old metal handle (35yrs old) saws has a 16d nail holding the guard open that I put in there 30 yrs ago. If OSHA shows up on a track I was working I could remove and drop the guard in a sec. I feel the guard is more of a safety hazard requiring a carpenter to use one hand to make a plunge cut or polish plane. One of the best videos on proper saw usage that the pros use everyday. This 65 yr old retired stacker loves this video.
This guy's a skill saw Ninja! 👏🏼
u should ck out larry haun!!! hes sick!
Larry Haun, much as I respect him, figured that cutting within a quarter inch was fine for framing. As a predominately finish carpenter, I wish to follow framers that hold a closer tolerance. Makes my life so much easier.
I can't wait to teach the Polish Plane at my next community workshop!
Been a Carpenter 51 years 69 years old. I love your videos. Just yesterday I used a Skillsaw with a sweet blade and cut a tabletop I had glued up with the underside up with a straight edge clamped. Makes a beautiful cut. In this case you go slow and start flat, not tilted with guard shimmed. Skillsaws do come in handy for finish work too.
Not a carpenter, just a homeowner hack but it's fun work and it's fun getting better, faster and more adept. It comes to you after a bit I feel like.
I wish I could learn under his hand as an apprentice .
You are.
Estabien
Yeah... but you must not do any mistake... or else.... nobody know what he could do to you with his saw 😂 Maybe a new haircut
Looks like somebody has a crush on this old dude!!!
Hahahsa
You'd probably leave all 10 fingers behind at the shop!
Norwegian carpenter here, been working wood for 12 years but some of your techniques were new to me. It was also an amazing watch, you are pretty good with that tool.. some of your angled length cuts were rediculous. Stuff I would never even think about trying with a skillsaw. I would have to break out the desk saw(? unsure of the word for this tool). But amazing show of skill there.
I am sad to say we very rarely use skill saws with a power cord anymore. Its all battery powered, makita or hitatchi. Not enough power in the battery for some of those tricks. I still enjoyed the video a lot though.
hei lars.. In the US its a table saw. Desk saw is close enough lol. Ha en fin dag
He may be talking about a miter saw.
I'm gonna start calling it a desk saw from now on.
No.
Close :) desk saw = Table saw for 45 rips. But that was impressive worked with a guy in Cape Cod I was a
dumbass for not paying more attention that man was on comparable level as a framer and saw wielder I think his name was Manning. There are some really skilled craftsman in US.
I measure with a micrometer, mark it with a crayon, and cut it with a chainsaw :)
🤣🙃😂😁😀
From perfect to shit in three steps😂
Cut the dang thing twice and it's still too short
Thats how the carpenters here do it . Lots of DIY has popped up out of necessity .
That's the stereotypical definition of an engineer 🤣
my friend you have just saved me so much time on my jobs. even my boss was impressed, and he's been a carpenter for over 30 years. ive been doing contruction for about 7 years now. thank you
He has completely mastered that skill saw.
beautiful channel you have here- also no bullshitting, which is rare these days
so true
Hell yeah! the skilsaw being used as the lawyers intended it!
That was definitely a lol comment !!
I have used a sidewinder for years. Its what I learned on. After watching this guy I went out and bought a skilsaw worm drive. My cuts have been quicker, cleaner and more accurate than ever before. I don't think I will ever go back.
@Hello Derek how are you doing
Square, plumb, and true, with appropriate fit up and fastening.
Words effortlessly spoken.
Notice he didnt mention even. Ah, we can assume, right?
So, yeah, I didn't realize that I didn't truly know how to use my freaking circ saw. This video sort of blew my mind. I feel like I just gained about a months worth of knowledge from being on a job site. Thank you so much for sharing this type of info!! I'm going to watch your entire series...subscribed.
Have to say... That free hand bevel rip was mighty impressive
As is your username. Well done.
I'm sure I speak for a lot of educated professionals out there when I say I have incredible admiration and more than a little jealousy at the professionalism, level of knowledge and satisfaction with the job. A gifted man in his career and his ability to demonstrate it. Thank you so much for the knowledge. Most firms charge by the hour!
As a carpenter you feel like you have skills this guy has skills you didnt know you wanted to have. I have some practicing to do. Well done!!
I'm surprised this guy needs a hammer, I would not have been surprised if he showed us how to drive a nail with the saw.
Mewtal8 every tool has a hammer end
Have you seen how quick and effortlessly he cuts and breaks certain things with his hands? He reminds me of an old builder mentor I had who all my friends believed was just beyond human with how strong he was
I could see Ivan Miranda do that... He has a knack of using Screwdrivers as Hammer substitutes... He does it so much he's started censoring his own footage when using an actual hammer because of necessity.
"now this is dangerous, but you gotta hold the guard back and tap the head with the teeth real slow"
Good one, he probably can, just doesn't want a viewer to get hurt.
You Sir are the Obi One of Carpentry.
Great Instruction.
May the force be with you!!!
I have watched this video a handful of times and it is so much more than a skill saw tutorial. You are learning about lumber, speed square, framing square, jointing (mortise, birds mouth), marking for processing wood, how to use saw horses, using your body to secure wood for different cutting operations, storing your tools.... I could go on an on.