Josh you need a half gate and some tube doors for your Grand Cherokee. That poor Grand Cherokee it was beautiful when you first got it done. Keep up the great work guys. 😊👍
@@yjsaabman honk from one end to the other, and everyone has to say TUNNNELLLLLLLLLLL. This is impossible in the Eisenhower tunnel - 2 miles at altitude
Try filling your tires with water, it works on tractors.... The truck i had done that on felt more stable and did not debead tires without beadlocks at 5 psi
Most folks forgetting the larger the vehicle, the heavier it weights. Now put some off-road bumpers, cab and chassis reinforcements, beef up axle housing, heavier unsprung tire and wheel, and you wondering where the hell my gas mileage goes?
You should never plug a generator into a regular plug unless you turn off breaker as you can get power back feed into power line and shock a lineman working on the system. Here in Alberta it is required to have a power shut off with a special breaker for generator that can not be turned on if main power switch to breaker box is turned on.
I got the same vision wheels on my ford ranger but with 40x13.50x17 super swamper sx2’s only 2 complaints it where the valve stems are you half to have rubber ones cause there’s not enough room to get a or chuck on it which metal ones and to get different beadlock rings they got to be custom made cause nobody makes any design ones
I noticed that with the valve stems, I like rubber valve stems anyway but I am guessing they put them so far back in there to keep them from getting smacked by rocks.
I'm going to Winrock this coming up weekend for the first time I have a XJ on 33s it is locked front and back and has a full cage I don't care about body damage what are some good trails to hit one down there
@@bleepinjeep you have to get blades that match the speed of your saw. No problems with my saw so far but I don’t do a lot of cutting metal. I don’t think I would try 1/2” with it.
I’ll add it to a video at some point but the answer is that they do make them but they are heavy and not really needed as the bead usually pops off the outside first
I dont know why everyone “recommends” a seller for stuff like tires i can literaly go to my local gas station and can get the same tire for the same price. Maybe 10$ difference in each tire
What? Tires at a gas station? Go ask the guy if you can buy a 43” SX sticky…. I’ll bet you $100 he has no clue what you are talking about and if he does that the answer is a resounding no I can’t get those.
Good Sunday morning to everyone ✝️ thanks for the video and the wrenching 🔧🪛🏁 and a shared thought Please everyone seek Jesus Christ in your life and heart . Pray and ask for forgiveness and mercy and guidance. Jesus Christ is the answer through it all ✝️🙏👍
Matt don't remove the tire stickers. Do Not Remove. Bad juju very bad things will happen. Johnny Rutherford Siad in 1980 one of the three years he won the 500. That's why he won stickers left on . No bad juju.
@@hendersonlandworks6158 We did the ultimate adventure last year. Even made a video on it. But its gone now, but a few of them are keeping it going under a different name, the unlimited adventure or something similar.
What transmission are you running on the scorpion I’m fixing to buy a xj to build and wanting to have atlas 2 speed t case with stock motor what the best set up
i just have a simple question, arent you missing one tire? arent u suppose to have four tires to balance the truck while driving? is my eyes playing trix as i see only three? please settle this
Josh you need a half gate and some tube doors for your Grand Cherokee. That poor Grand Cherokee it was beautiful when you first got it done. Keep up the great work guys. 😊👍
What do you do in a tunnel? You roll the windows down and drop a gear or two and listen to it sing!
maybe but the rules said we couldnt add back to the budget this year by selling stuff.
@@yjsaabman honk from one end to the other, and everyone has to say TUNNNELLLLLLLLLLL. This is impossible in the Eisenhower tunnel - 2 miles at altitude
@@bleepinjeeplol wait i think this reply was for me from another video about the flatbed. I still found it! 😆💕👍
Outstanding and awesome as always.Thanks for sharing and taking us along
You are the Mr. Rodgers of the offroad community. I could listen to you for hours. You're just so calming.
Wow, thanks. Google mr bleepin rogers is you haven’t already
Maybe cut the doors in half - little bit of protection. Cut the hatch in half and turn it into a tailgate so your tools stay put.
Looks like a great time to be had 👍👍
Something about super swampers makes them just the coolest off-road tire ever ❤
they got the tread pattern down years ago and stuck with it!
If you trailer ….
Go josh 💪 looking forward to seeing what yall do with it
Would love to see Dex & Josh turn the bumble into an RC Jeep
and then send it off a cliff!?!?
Scott is good people, he is also partly responsible for the Rattle Rock trail at Windrock.
you two are a kick to watch
Always honk in the tunnel!
Great job guys. Thank you 😊
New boot goofing👍
Straight up, mad Max looking beast
Best channel on TH-cam
Absolutely the best channel ever ❤️
Try filling your tires with water, it works on tractors.... The truck i had done that on felt more stable and did not debead tires without beadlocks at 5 psi
THANKS FOR THE GREAT VIDEO
Some expensive wheels and tires there. Great stuff can’t wait for the wheeling.
The new shoes are a huge improvement…Scott set me up with my 43’s when nobody else could get them … he’s the tire whisperer!
Can’t wait to see the carnage!😅
Ohh Black Mountain. We were there a few months ago. I watched a few guys in ur group do lions den.
@9:09 you made the forbidden extension cord lol..
We need naps now because we are getting OLD!
Naps are a good thing in the older yrs
I’m not looking …I’m watching this in braille 😎 I can feel tire. Only professionals drop the battery out of their tool and drag wheel on concrete
ALASKA HERE spray your blade with pam before cutting aluminum
Also duct tape the underside of your table
🤘 nap time lol 😂 always
43s look sick!
Aww man that was only 19 minutes, come on bro lol. Can't wait for the next one.
Will have the follow up soon!
Can't get enough of bleepin jeep❤
Most folks forgetting the larger the vehicle, the heavier it weights. Now put some off-road bumpers, cab and chassis reinforcements, beef up axle housing, heavier unsprung tire and wheel, and you wondering where the hell my gas mileage goes?
the tyre mounting board is a really good idea..
now just to find a good place to store it
Another reason for the extra set of holes is weight savings on that rotational weight!
ya there was some non threaded holes too I thought that was cool
New saw is one of the noisiest things known to man kind.
Check out the Dewalt metal cutting saw. Much better size.
Soft doors or plexiglass half doors for Josh
You should never plug a generator into a regular plug unless you turn off breaker as you can get power back feed into power line and shock a lineman working on the system. Here in Alberta it is required to have a power shut off with a special breaker for generator that can not be turned on if main power switch to breaker box is turned on.
All good here, we did cut the main power.
Honk or Hold breath? I close my eyes and see how long I can go 🙈🤣💕
PS- wow lotta weight saved. Will josh make some half doors for it 🤔
11:05
Liver issues, not kidney.
Leave the weather stripping - less sharp edges is more gooder
Camera looks way better, not sure what you changed
❤ Lookin' Good 👍😎✊
Aluminum will clog up a blade made for steel.
I got the same vision wheels on my ford ranger but with 40x13.50x17 super swamper sx2’s only 2 complaints it where the valve stems are you half to have rubber ones cause there’s not enough room to get a or chuck on it which metal ones and to get different beadlock rings they got to be custom made cause nobody makes any design ones
I noticed that with the valve stems, I like rubber valve stems anyway but I am guessing they put them so far back in there to keep them from getting smacked by rocks.
dang i didnt know you guys were on that side of Tennessee would have love to try and say high when i was over there visiting
been here for 16 years, where you been?
Set the depth your blade will last longer
I've always preferred Swampers
Please tell me that you turn off your main breaker before you back feed a generator into your shop!
Josh needs some type of tube door or something on his jeep.
Ya that will probably come in time, but then you are adding the weight back in.
I'd at least make some tube half doors for Josh's jeep.
Looks good without doors but i think maybe cutting them at the pillar and capping them would have kept you a little cleaner in the mud. Lol
Agree. Form and function
Be nice to the Blue tailed Skink, they have a 20 year long life span. It mait get back at you when you least expect it.😊
he was trying to check out what we were working on in the shop.
10:05
Why don't you guys do a rebuild on the Bumble?
Josh deserves it👍
Rebuild? We just built it
Can't beat a set of stickie super swampers.
What type of coil overs are those on your scorpion?
I'm going to Winrock this coming up weekend for the first time I have a XJ on 33s it is locked front and back and has a full cage I don't care about body damage what are some good trails to hit one down there
idk maybe the blacks. Might try 22, 16, 15, for starters. We also did a video on 5 trails for newbies at windrock if you dont want crazy body damage.
Thank you very much for getting back with me hope you all have a good day
You can buy metal cutting blades for a cordless circular wood saw. Cuts metal like butter
My cordless DeWalt can't even cut wood like wood.
@@Grunk-ik9os really. I use a brushless milwaukee 61/4 circular saw with metal blade and it goes thru 1/4” plate like butter.
@@beadblaster9508 well, Milwaukee probably just makes better circular saws then.
maybe so but metal saws have a different speed and torque than wood saws, I hear they dont last long using them for the wrong purpose.
@@bleepinjeep you have to get blades that match the speed of your saw. No problems with my saw so far but I don’t do a lot of cutting metal. I don’t think I would try 1/2” with it.
When you mounted the visions and 43” did you need anti coning rings and did you run the full torque specs?
No we didn't use a ring. Ran them around until the ring touched the wheel, no Torque wrench, just ugga duggas
@@bleepinjeepMatt thank you for the reply
road trip?
Why don't you run double bead lock rims? And please could you answer this in one of your videos, thx
I’ll add it to a video at some point but the answer is that they do make them but they are heavy and not really needed as the bead usually pops off the outside first
I dont know why everyone “recommends” a seller for stuff like tires i can literaly go to my local gas station and can get the same tire for the same price. Maybe 10$ difference in each tire
What? Tires at a gas station? Go ask the guy if you can buy a 43” SX sticky…. I’ll bet you $100 he has no clue what you are talking about and if he does that the answer is a resounding no I can’t get those.
@@bleepinjeep not here in canada
Good Sunday morning to everyone ✝️ thanks for the video and the wrenching 🔧🪛🏁 and a shared thought Please everyone seek Jesus Christ in your life and heart . Pray and ask for forgiveness and mercy and guidance. Jesus Christ is the answer through it all ✝️🙏👍
Matt don't remove the tire stickers. Do Not Remove. Bad juju very bad things will happen. Johnny Rutherford Siad in 1980 one of the three years he won the 500. That's why he won stickers left on . No bad juju.
Make tube doors
I;m sure that will come in time
Will yall ever do Patersons 4wheel adventure?
Like as in Peterson's 4 Wheeler Magazine? Is that still around? Are you talking about the Ultimate Adventure or the Dirt and Drive?
@@bleepinjeep ultimate adventure
@@hendersonlandworks6158 We did the ultimate adventure last year. Even made a video on it. But its gone now, but a few of them are keeping it going under a different name, the unlimited adventure or something similar.
What transmission are you running on the scorpion I’m fixing to buy a xj to build and wanting to have atlas 2 speed t case with stock motor what the best set up
stock AW4 with a decent cooler out front. Works great.
Am i tho only weirdo that thinks body damage looks good 😌 Tubers are cool too. Looks good Josh 🤙🏻
to a certain point until you have a rasin
@@bleepinjeep Fred's "Clampy" tho 🤌🏻
Josh has lost his mind. Now it gets soggy inside when it rains. Has to be parked inside.
i just have a simple question, arent you missing one tire? arent u suppose to have four tires to balance the truck while driving? is my eyes playing trix as i see only three? please settle this
If he mounts tires, why would you not get them already done?????? Mounting huge tires on beadlocks suuuuuuuucks
That scale is useless in the south
A waste of time and money get a bass cat jaguar STS puma.