Blackstar HT-5RH MkII - Sound Demo (no talking)
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- *Buy now: www.thomann.de...
Review: bit.ly/Blacksta...
Here's our demo of the new Blackstar HT-5RH MkII Amplifier.
Soundfiles/ Video: Bassel Hallak
*Affiliate-Links: Part of the revenue generated through these links will be paid to us as commission, depending on the measurable success. You are welcome to buy the products elsewhere. The link is only a suggestion to look at the products.
Legal notice:
Remise 3 Medienservice Agentur GmbH
Ludgerusstraße 46
47179 Duisburg
Represented by CEO: Hansi Tietgen
Amtsgericht Duisburg, HR B NUMMER 19797
Tel: 0203/498705
Fax: 0203/87 96 864
Email: office(at)remise3.de
VAT-ID: DE 256765312
Responsible for contents according to § 5 TMG: Hansi Tietgen
*Affiliate Links: Ein Teil des Umsatzes, der über diese Links generiert wird, wird je nach messbaren Erfolg an uns als Provision ausgezahlt. Ihr könnt die Produkte gerne woanders kaufen. Der Link dient lediglich als Vorschlag zum Anschauen der Produkte.
Impressum:
Remise 3 Medienservice Agentur GmbH
Ludgerusstraße 46 47179 Duisburg
Vertreten durch den Geschäftsführer: Hansi Tietgen
Amtsgericht Duisburg, HR B NUMMER 19797
Telefon: 0203/498705
Telefax: 0203/87 96 864
Email: office(at)remise3.de
Umsatzsteuer-Identifikationsnummer DE 256765312
Inhaltlich verantwortlich nach § 5 TMG: Hansi Tietgen
Subscribe: bit.ly/GuitarBonedoSub
Review: bit.ly/Blackstar-HT-5RH_review
Follow us on Instagram: instagram.com/guitar.bonedo/
I just ordered the combo version. If I can get it to sound even close to this good, I will be happy. This was the best review of this amp, at least in my opinion. Thanks for taking the time!
It’s going to give you probably a different sound. If you don’t like it swap the speaker. The speaker and cab is 80 percent of the sound. I have tried one amp sim with different cabs and all sound different.
@@jorgeguitar2540 Thanks, Jorge. I got the amp and it fulfills most of my needs. I do want a little more distortion than it provides. I put a Fulltone Fulldrive 2 in front, and I am there. Thanks again for your knowledge. Point taken. I will try it with some old cabs and speakers now.
Its in the hands
best amp demos on YT. thanks
I just picked up one of these and an running it through a PRS Mark Tremonti cab. It's a great amp head. Highly recommend it anyone considering it.
Does the dirt sound as compressed as in the videos?
I have the new HT-1R MKII, the old HT-5R and the new HT-20MKII, the new HT20MKII is hands down the best overall. It has 2 preamp tubes for a better clean tone and EL 84s for a fat overdrive in a bigger cab so bigger sound....and with the 2 watt button I have no need for the other amps. Get the new 20 watt and play it on 2 watts at home, and full 20 when playing out you will be happy!
2 tube watts is still very loud though, louder than some people can really justifier. 0.5 watts might be just what they need.
@@Yimello The MKII 20 watt has a true master volume, does not affect tone because it is last in the chain...makes it sound good at any volume. I have 8 amps from fender to Marshall and it is the best hands down.
Great advices! Thanks!
Amazing amp! I use it for practice at home. I've tried it some times live but even with Microphones it's to small...for live I use the 50 watt version
It’s plenty loud enough live, especially using a mic or direct line to PA
Too small with microphone? Maybe in a stadium.
@@stringlocker if you play with a drummer it's not loud enough
you can plug it into a harley benton GPA100 if you don’t mind using a 100w solid state poweramp. That is a cheap solution if you rarely gig outside the house.
I'm seriously considering one of these and A HT 50 head but i am hesitant because I'm hearing a lack of upper mids.
I would to hear them through some betterv Quality Celestions or some WGS speakers. Black star does not have much variety in their speaker choices . Its all Black Star design speakers and Celestion 70/80s. They were putting V30s in their higher Quality series one and Artisan cabs but it seems those are discontinued.
Endlich ein gutes Demovideo zu diesem Amp! Nur die Gain-Spanne im Drivekanal kam leider zu kurz. Wo sind die leichten Overdrive sounds? Klingt auch voll in Ordnung für diese Preisklasse, bis auf den DI Out am Schluss... der kratzt in den Ohren
Would this be enough for studio band practice with acoustic drums? Also I need a great clean headroom
Obviously not.
You could try going to the desk via XLR , but you would probably need a PA monitor unless you have a tame drummer ?
@@edwardcullenhotass this into a 212 or a 412, it is VERY loud.
@@lperry65 This thing is loud.
I dont understand why people told you no... with a 2x12 cab you'll be fine. Especially if youre playing a lot of cleans then the drums probably aren't playing very heavy either you could probably even get away with a 1x12.
Geiler Sound, aber warum zum Teufel wurde der Stand by Schalter wegrationalisiert??? Ich behalte meinen alten HT5R, gepimpt mit altem Greenback.....
I'm currently trying to trade my marshal origin20h and 412mxar cab for this 5w blackstart setup with the 112..but it has been a challenge
And which Was the cab?
1:18 2x12 Vintage 30
What is "4x12 emulation"? I guess that means you're not recording a speaker connected to this amp, and are instead recording some software that's listening to the amp's USB output and trying to shape the singal somehow. Is that right? If so, does this video tell us more about the amp itself, or more about that emulation software?
The thing is that this amp has an emulation in the line out of a 4x12 speakers cab, which as you say you can connect directly to an interface to record
Can you gig with this without miking up ,??
I can't tell what the difference the ISF does here and on mine too!
connect a 2x12 cab with speakers wired in series
I think I hearing more bottom end as he turns it clockwise
You have one of these and you can't hear a difference as you turn it. Hard to believe.
very cool amp but when I switch channel with the footswitch form clean to OD while playing the amp pops loudly ; do you have this issue too?
This is a normal behavior on several tube amps. Mine pops too, you have to make a quick break when changing channels to avoid the pop. Is really annoying. When a tube amp is designed to avoid the pop, I think it's a relay circuit that adds a delay in the sound between changing channels.
Seth of Behemoth and Silenoz of Dimmu Borgir uses Blackstar
Wow, dimmu borgir use blackstar! I never knew that. Now I've finally made my mind up. Im going for a Marshall.
Help me understand something with this head and others alike, if its a 5 watt tube head, that seems kinda low to me but is sounds louder than 5 watts. What about this head is “5 watts” I don’t get it?
5 watts is it's output power rating. Volume can vary from one amp to another amp with the same 5 watt output rating. It is subjective.
Wattage doesn't measure decibels - as mentioned it is power. It does give some idea of how much clean headroom you'll get though.
Tube wats are much more louder
I think the ht5 defines who blackstar is as a company. They only need to make this amp.
Supi gemacht :)
I have one and I have a loud "pop" noise switching channels while sustaining a note... Did anyone notice that too? It doesn't seem normal.
Happens with tube amps. You may need a cleanup on aisle 2. Electronically.
Can you DI without any cabinets attached?
No
@@yallevereatenbeans2723 yes. you can.
@@trindermon as far as I know with tube amps that'd harm the amp
@@yallevereatenbeans2723 it does, and i am slightly wrong... :-) you can use the USB out on the HT5 with no cab... as the HT5 mk2 applys a load when its on standby with USB out used. look in your manual.
My earlier HT20 MK.1 has inbuilt load protection. No usb, different format.
However, I don't make a habit of it.
is it just me, or does the amp sound like its missing something? I have this head, and I run it through an orange ppc112, sounds like its missing something when distorted but I can't put my finger on it
Do you have this version or the older one?
It's a lower priced 5 watts amp. It won't sound like a cranked 100 watt Marshall Plexi.
Have you tried it out with sd-1 or tube screamer?
Elon Mush I’m not looking for a cranked Marshall sound, over all through my cab it sound muffled
Ok, I was just pointing out the restrictions. The demo sounds like the amp is capable of a bright tone, so maybe it's your cab? Have you tried it with another cab? Maybe it will sound less muffled with a brighter voiced speaker.
While decent😎 demo for what it is, why not use the same guitar & selected PUs & pot control settings when walking through varying settings on the amp itself to better illustrate how the amp itself behaves at its own numerous setting possibilities w/o engaging the different & plethora of possible guitar inputs? Nobody ever really does that. At least when someone showcases a few settings even with different input signals, most then do it within a song context. But, I'd prefer the simpler and straightforward approach with one guitar and a single electronics setup for it in play against the amp's various incremental settings that better provide a objective baseline from which to gauge the amp's performance as opposed attempting to pull from a potpourri of guitars in mixed amp settings from which to guess whether or not it is an amp you can use with your own instruments. Keeping a single input tone signal and often preferably a single guitar lick/riff that describes how lead licks or rhythm licks come through the amp is imo a better way to give any credibility to the demo as to how it can work within you own rig. Few channels that demo gear seldom manage to provide that aspect especially when trying to keep the video within a time frame.