To answer some of everyone’s questions. Unfortunately, I have since sold the Caddy and won’t have any more videos to post of it. I have been working on building a C7 Corvette which I hope to post some videos of soon as well a recent addition of a 17’ Escalade that I also recently received Corsa exhaust and their new intake. As for some of the specs on the Lade it had a 3200 stall, Holley High Ram intake, custom cam with supporting valve train, kooks LT’s with catless Y-pipe, Corsa exhaust Belltech 2”-3” drop, 24” KMC 707 wheels (in video). Those were the basic large aspects of the truck.
@@chrissalter7773 was definitely a automatic lol but sound like that because with a camshaft that size you have to have a stall converter or it will be slow as can be... very nice caddy man sounds bad ass
This is a custom grind cam which I don’t have the specs. If you would like to purchase a similar cam package call or visit LSxperts Complete Performance in Ball Ground GA and follow them on FB. Tell them Aaron sent you 👍🏼
God I love going back to this video all the time and listening. To the original poster of this or owner of it can you tell me what drop set up that is? Does that one still have the magnetic ride or was it removed and replaced?
Hey boss man, I recently got in touch with lsxperts and they led me in the right direction for all the parts, I’m in Texas and as far as they are it would be too much of a drive, and I’m going to be getting ‘ a cam kit, headers, 3xoem y pipe, torque converter’ total cost is 3100-3200 ish, does that sound about right? It’s a little more budget friendly so that’s why it isn’t too expensive
Thomas It’s not a standard option but it is a rare option. A couple people on the yukontahoe forum have them. It was an option you could buy on some of the LTZ models or something. I forget what model but the guys on the forum have them. No they aren’t swapped.
Thomas Stott sounds like a BTR stage 4 with a 109 LSA, long tubes and corsa. That cam package is on sale for $399, headers cost $399 (if you go speed engineering). Corsa will set you back a little. But 10k is nowhere near accurate. I’m about to do the same thing to my 13 Escalade. 2k and you can be done with it.
@@scottyanderson5883 i went with btr stage 4... upgraded dual valve springs... pushrods... $760.... speed engineering 1 7/8 long tubes .. off road y pipe and muti layer exhaust manifold gaskets... and hardware... plus spark plug wires... $509 to my door... circle d 3000-3200 stall $650... and cost of tune... so your close 2k in parts.. no labor or tune... with my tune and vortech v3 charger ... custom intercooler kit and injectors... fuel pump... still not even close 10k
Sounds deadly like a 2000hp drag car. EXCELLENT looking Caddy tho I most say.
To answer some of everyone’s questions. Unfortunately, I have since sold the Caddy and won’t have any more videos to post of it. I have been working on building a C7 Corvette which I hope to post some videos of soon as well a recent addition of a 17’ Escalade that I also recently received Corsa exhaust and their new intake. As for some of the specs on the Lade it had a 3200 stall, Holley High Ram intake, custom cam with supporting valve train, kooks LT’s with catless Y-pipe, Corsa exhaust Belltech 2”-3” drop, 24” KMC 707 wheels (in video). Those were the basic large aspects of the truck.
I want that cam lol what’s the spec on the cam and did you have to fly cut the pistons?
Love cammed cars (regardless of year, make and model) they sound absolutely amazing!
Enjoyed the video!
My own opinion that this custom black 2008 Cadillac Escalade is tight.
Daaaamn maybe mine will sound like that one day
I wanna see more like a driving video inside 0-60
EARGASM !!! 🤜🏾💥🤛🏾 DAMN!!!
MORE! WE DEMAND MORE!
Chap rating: 10 out of 10 she sounded strong
Plot twist its the corvette sounding like that.
After the mods was it still reliable. Thinking of doing this to mine.
You just made me wanna buy one
Holy fu// i need that whole set up on my cadi
Forget about the Escalade. What is that CRV packing?
I neeeeeeeed to know the specs on This cam!!
It was definitely a standard I want to know the motor set up
@@chrissalter7773 was definitely a automatic lol but sound like that because with a camshaft that size you have to have a stall converter or it will be slow as can be... very nice caddy man sounds bad ass
More updates on this sick build plz
This is a custom grind cam which I don’t have the specs. If you would like to purchase a similar cam package call or visit LSxperts Complete Performance in Ball Ground GA and follow them on FB. Tell them Aaron sent you 👍🏼
Man I wish you could find out the specs. Been stalking this video for a year now. I want that same cam
Sounds like mine!! Awesome job Sir
What did you do to yourse to sound like this?
Man what's the spec on this cam I'm trying to get my escalade cammed n I luv the sound this is da 1
Sounds so good
Oh yes.
If I may ask. What cam did u buy. Ordering one for my 2013 soon and is there anything else I should get along with it that’s needed to do the job
Where i can buy tailpipes like your one? Thanks
What cam is that. Sounds mean.
Looking for that sound in my 65 impala
God
I love going back to this video all the time and listening. To the original poster of this or owner of it can you tell me what drop set up that is? Does that one still have the magnetic ride or was it removed and replaced?
It sounds sick bro 😎
Fuckin badass video bro make more videos of this it's so interesting
What converter is in it to work well with that cam? It sounds amazing!
Did you put a lowering kit on that bad boy?
Hey boss man, I recently got in touch with lsxperts and they led me in the right direction for all the parts, I’m in Texas and as far as they are it would be too much of a drive, and I’m going to be getting ‘ a cam kit, headers, 3xoem y pipe, torque converter’ total cost is 3100-3200 ish, does that sound about right? It’s a little more budget friendly so that’s why it isn’t too expensive
I drive an 07 Escalade and I got inspired by yours lol so I asked for a custom grind stage 3 but going with a stage 4 instead
Sounds like my btr stage 4 in 6.2
Nice truck where i can get the rear window sticker???
beast mode.....
Chop chop chop
Sick dude! Got any more vids?
Do a 0-60 times man cause I bet it sounds hella mean
Howd ypu black everything out? Wrap? Paint?
What cam specs is this
She’s my new “pinup model”!! That’s sexy!!!!!
Will this throw any engine codes?
What size wheels and tires???
How much did it cost to do this
Gah damn 😩😩
Is that corsa???
What size converter did you put in?
Best way to make my 09 ext 500hp? Cheapest.
Specs on wheels please. I’ve been looking for that exact look.
KMC 707 wheels 24” with a 305 tire. I can’t remember the width.
Do a rev limiter
What drop ?
My neighbor is donating his l92 out of his escalade, for my 84 camaro
What converter???
Nice tahoe.
Ha!
tahoe only comes with the baby 5.3 lol thats a grown man
Melanie Stott actually there are some Tahoe’s that came with the 6.2L. Very rare but they are out there.
@@scgbtravis7180 no sir... gm did not offer the 6.2 in a tahoe till 2018... every one you think you have seen have been swapped
Thomas It’s not a standard option but it is a rare option. A couple people on the yukontahoe forum have them. It was an option you could buy on some of the LTZ models or something. I forget what model but the guys on the forum have them. No they aren’t swapped.
Sick. Cant wait to mod my 2014 my wife and i picked up. Not sure if she will like a cam but we will see lol.
Lmaoo she’s gonna pissed , I bet lol...
What converter you running?
It’s not the Escalade loping it’s the corvette 😂
What cam do u have in that beast
Adrian Dominguez it is a custom grind Brian Tooley LS3 cam
Is truck for sale
4sale?
How much did it run you to do all this i would like to do exact same set up sounds really good !?
Daniel Espinoza hard to say it took a little trial and error but at least 10k
@@C6_ZR1K 10k did that include the cost of the escalade...
Thomas Stott sounds like a BTR stage 4 with a 109 LSA, long tubes and corsa. That cam package is on sale for $399, headers cost $399 (if you go speed engineering). Corsa will set you back a little. But 10k is nowhere near accurate. I’m about to do the same thing to my 13 Escalade. 2k and you can be done with it.
@@scottyanderson5883 i went with btr stage 4... upgraded dual valve springs... pushrods... $760.... speed engineering 1 7/8 long tubes .. off road y pipe and muti layer exhaust manifold gaskets... and hardware... plus spark plug wires... $509 to my door... circle d 3000-3200 stall $650... and cost of tune... so your close 2k in parts.. no labor or tune... with my tune and vortech v3 charger ... custom intercooler kit and injectors... fuel pump... still not even close 10k
@@thomasstott527 yeah but yours sound nothing like this
type cammed and numbers lope
Disgusting 💪
My mom has a better Escalade sound
Sounds like shit! Why would you want your Escalade sounding like a Harley 🤦🏻♂️
Merica thats why 🇺🇸
Cause I also like EVO cammed Harleys lol
Sounds amazing
What size cam and motor