record STA20 Automatic Sliding Door BDE Control Switch Video Guide

The record BDE Control Switch used on the STA20 sliding door will allow you to select different operations for your door and show you any errors that appear.
For more information visit www.recordukdirect.co.uk or call 0845 6430013
Options shown in video include:
Automatic mode - allow door(s) to be activated for either side
Continuously open or hold open mode - door(s) will remain open until you select a new mode
One way mode - door(s) only active one side
Manual mode - door(s) operate as normal doors which you push or pull

[@efransophoto]

Is there a video on servicing the hook deadbolt (with vertical rod) on sliding double doors?
I need to remove a lock body for trouble shooting and can't find how to remove the top guide bracket

[@yeyen92]

Thanks

[@RajeshSharma-wy5jl]

Have problame for glass door record calibration run

[@thetattoo007]

How to deactivate internal sensors? Only to let people in not out

[@wupurass]

Hi , If you contact record direct, their technical dept will happily answer your query. regards

[@stalincat2457]

Deactivating internal sensors is not normally done. Simply inverting the adress on the sensor so the outside sensor is inside and vice versa is possible but has to be done by a service technician due to recalibrating of the radars and maybe a frequency switch on one of the safety sensors.
If you are an end user and want to choose between exit only and enter only this can be done with some creative wiring using the optional FEM1 extension. Program one output to "AKA" (outside sensor) and another one to "Operating mode reduced". Wire the key-switch (SSK) contact on the main control in series trough both contacts. Now if the door is locked (padlock) and in the "reduced-open" mode (asterix/snow-flake), the outside sensor will trigger a door opening but the inside sensor wont.

[@TaiwanBobby]

Switch green aka and aki wires and your 'exit' will be reversed sides.