@@evgeniturbocharger i dont see specific pump info or spacer info im building k24 om604 wana use lucas or bosch ve do you have any idea what will lucas do with boost it has boost sensor
@@claudiumedan3834 never use special tools, but @10 degrees BTDC(as long i remember) and pump shaft rotated just to "kiss" the cam. But the adance not enough at higher rpm, need to extend the travel of the advance piston
Hi,
Will the bosch ve pump work for the om601 turbo engine? Mercedes vito engine. Want to put it in my truck.
Hello. Can you tell me at what timing you set the VE pump?
hello what exact pump and adapter + spacers do i need ? also what injection timing ?
Read below :)
@@evgeniturbocharger i dont see specific pump info or spacer info im building k24 om604 wana use lucas or bosch ve do you have any idea what will lucas do with boost it has boost sensor
Never used Lucas, but from my experince change the nozzles with Bosh, i blew an engine because nozzles remain open at higher rpm and fuel quantity
@@evgeniturbocharger what do i need to swap bosch ve pump all the parts
Hello. The VE pump is from a 2.5td iveco? What other modifications you make? The bolt pattern are the same?
It's from 2.8 liter engine (12mm), i use pump adapter from om602(2.9 liter di) and pump bolt right on. Only needs small bushing to center the pump.
@@evgeniturbocharger thank you for the answer. Do you have a code for the adapter? Can i buy it pr only second hand?
@@claudiumedan3834 sorry didn't note any part number, but the adapter you can find from sprinter or E class(w210) and most common sell it with the IP
@@evgeniturbocharger thx. I machined my own adapter and modified the chain sproket hub. Do you remember the timing you setup the pump?
@@claudiumedan3834 never use special tools, but @10 degrees BTDC(as long i remember) and pump shaft rotated just to "kiss" the cam. But the adance not enough at higher rpm, need to extend the travel of the advance piston
Hi... Which injectors did you use... Stock injectors or om605??
bosch from om605/606 ,stock lucas injectors remain open at higher volumes and bend con rods :D
Добрый день что за насос?
it's a Iveco Daily pump , but with changed cam plate from prechamber engine
@@evgeniturbocharger а че не на руском?
@@victorvv41 от ивеко. Короче тут гибрид насос. Привод от 602го насоса, а сам насос от ивеко.
Чем людям Лукас не нравится?))) От жигулей карбюратор воткните.
А что за ТНВД такой интересный? Только говорите что это его родное луковское говно просто переделанное на механику
Это насос Iveco Daily, но с измененной кулачковой пластиной от форкамерного двигателя
@@АльбертВагизов-д9ь лукас тнвд уже закалибал. Что надо делать. Солярка не бризгает, просто течёт. В аварийное режиме рабатает?????