Great video truly appreciate it. One NOTE: you do not need to remove the two bolts under the passenger seat. However, it was good to see what happened once I did and to know I can remove them.
@@Motomillion yeah, I am unimpressed with this part at the price point. Maybe you got a better deal than me. I didn't pay that much more for a clear clutch case and shorty levers. This piece at 100 dollars is worth it, but at 210 dollars....rubbish.
Its so mutch easier to just remove the two mounting bolts and disconnect the one conector and unbolt the tail unit and split it in half when it is off the bike.
I heard another TH-camr say that this NRC product burns out over time. Does anyone follow the instructions when they install this kit? There's no need to even take the back seat off and undo those grab strap bolts. Also, those white shim washers are meant for the bolts that hold the whole kit on the bike..
Never had issues. If there are any problems they warranty their products. The white spacers are for certain plate positions. We have a new updated video coming soon.
I had the NRC eliminator kit for my 899. The plates were really close to the engine and some people said their plate got warped from engine heat. This kit seems to have the plates a bit farther out but will it potentially have the same issue? Just wanted to know in advance so that I can stick a heat shield on the plates to prevent warping problems. Thanks in advance.
The one for the Streetfighter V4 is here : www.motomillion.com/collections/ducati-streetfighter-v4/products/nrc-ducati-streetfighter-v4-v4s-tail-tidy-fender-eliminator-kit
Hey guys, I have a 2018 v4s. I installed this kit the day after I got my bike. Recently the DES lights has come on and the bike rode terrible. Brought it to my dealer, and they said the blinkers are controlled by the BBS and that’s what caused the problem. They have to replace it, and Ducati won’t cover it under warranty. The BBS alone is $500 without labor. Has anyone else had this issue? I call BS
The turn signals have nothing to do with the engine control unit and the bike being in limp mode (since you are saying the bike was running horrible). Also the DES is the suspension error code, again would have nothing to do with the turn signals.
I wanted to install it so badly and it got dark that I put them on with no signals until tomorrow. Had to rush because my fiancé doesn’t know I bought a bike yet 😂
Great vid. Manny keep it up and want to see more vids. of new product on the market. By the way thanks to you, speedcell lithium 5.0 battery are awesome my bike are back in business.
Yes! Thank you! I’ve seen so many installs that didn’t explain where the nylon washers go. Not even NRC instructions showed this. Much appreciated 👏🏻
That NRC just blows the competition right out of the water. It is by far the best liking eliminator on the market.
AWESOME video Mani!!!!!!!!!!!!!!!!!!!!! I can't wait to produce my video of the Speciale with all of your parts installed.
Thank you Ib! Can't wait to see it and hear that roaring Akrapovic exhaust!
Thats my man ib from 2010 nd his frist bmw 🔥😍loveu
Ibbbbb
Mani is absolutely a class act. I have had issues with things purchased on installs. And he reach out to me personally to resolve any issues.
Thanks for the instructional video! It always helps watching someone else do it before attempting to do it yourself.
Great video truly appreciate it. One NOTE: you do not need to remove the two bolts under the passenger seat. However, it was good to see what happened once I did and to know I can remove them.
5:08 how did you get the inside of the brake lights to light up too? Is that a mod u did in a separate video?
Great video brother! Definitely do more install videos, I really enjoyed it!
Thank you, got a few of them lined up, we will upload them as we get them ready.
WAVKL🏁🇱🇷
If just looks so mutch better than any other for the Ducati panigale V4.
My tapered screws were actually too long and i had too get ones 1/16 shorter...
Same
Great video! Does this and your windscreen video for V4S also apply to the SP2? Thanks!
Damn i just cant get mine to sit flush like that.
That is definitely not boring taillights lol. It pops out atya !!! Very nice 👍
Why did you remove the seat? Not a requirement of the install.
You are correct, that had to be edited out.
@@Motomillion yeah, I am unimpressed with this part at the price point. Maybe you got a better deal than me. I didn't pay that much more for a clear clutch case and shorty levers. This piece at 100 dollars is worth it, but at 210 dollars....rubbish.
Wonder did you really wear the AP while doing the install lol ;)
Its so mutch easier to just remove the two mounting bolts and disconnect the one conector and unbolt the tail unit and split it in half when it is off the bike.
Even has the rain mode too where both sides flash like the hazard lights in a car
That’s not where the nylon washers go
Magnifique 😍😍 l'année prochaine ✌️
Same video for the streetfighter v4s right ?
Yes sir. Extremely similar.
That looks clean.
dual saddle???
Ι can't find it on the website
Are they street legal in the US?
When is it gonna be available again sir?
Available again!
Available for the new Ducati Streetfighter V4S ?
What is the maximum distance between the outer edges of the 2 indicators in centimeters ?
Great Video! The bike looks beautiful!
Thank you! Wait till you see the exhaust this bike is getting installed!
I heard another TH-camr say that this NRC product burns out over time. Does anyone follow the instructions when they install this kit? There's no need to even take the back seat off and undo those grab strap bolts. Also, those white shim washers are meant for the bolts that hold the whole kit on the bike..
Never had issues. If there are any problems they warranty their products.
The white spacers are for certain plate positions. We have a new updated video coming soon.
Hi will this fit the v4 street fighter thanks 👍
It will fit the V4 Street Fighter.
I had the NRC eliminator kit for my 899. The plates were really close to the engine and some people said their plate got warped from engine heat. This kit seems to have the plates a bit farther out but will it potentially have the same issue? Just wanted to know in advance so that I can stick a heat shield on the plates to prevent warping problems. Thanks in advance.
Never heard if such issue.
Great! This is compatible with streetfighter?
SF V4 has one that is made for it which looks the same. Just some of the electronics are different so that it doesn't hyperflash.
@@Motomillion on motomillion.com I saw that there is also a version for streetfighter v4s
Does it fit to Panigale V2? Thanks
V2 has a specific one that looks identical. Just wiring is different
Does it also have slop in the plate mounting holes?
how do i install the back most position
can this be used in panigale v4r???
Yes, it is the same.
Why do i keep smelling carbon fiber and Rizoma parts?
Even more special stuff than Rizoma parts ;)
whoa, really cool dude 😀
Does this tailtidy fit the streetfighter model?
The one for the Streetfighter V4 is here : www.motomillion.com/collections/ducati-streetfighter-v4/products/nrc-ducati-streetfighter-v4-v4s-tail-tidy-fender-eliminator-kit
Could you tell me how you got the top part so flush? For some reason, mine is not. I followed this installation instructions 100%
Do you mean the little flap looking piece? If so, you can test fit first, if it is off a little but, just bent it with gentle force.
Im having the same issue mine has a gap in it pleas let me know what you did to fix it
Awesome vid, i assuming this should work on the 2019 V4r
Thank you, and yes, the application on the V4R should be the same.
the ducati v4 has a passenger seat
, greetings from Colombia
Man those freakin connectors took me like 10 minutes to put in😑😑😑
Thank You!
Manny from motomillion
That is the him! :)
Looks great. Who rides two up on a V4? Remove those damn things. Killing me smalls.
Especially if you don’t want pussy white cream all over the seat from the panty dropper Panigale Exhaust. Wet af from such a sexy bike 🏍
is that kit legal?
It depends in the jurisdiction you live in.
Hey guys, I have a 2018 v4s. I installed this kit the day after I got my bike. Recently the DES lights has come on and the bike rode terrible. Brought it to my dealer, and they said the blinkers are controlled by the BBS and that’s what caused the problem. They have to replace it, and Ducati won’t cover it under warranty. The BBS alone is $500 without labor. Has anyone else had this issue? I call BS
The turn signals have nothing to do with the engine control unit and the bike being in limp mode (since you are saying the bike was running horrible). Also the DES is the suspension error code, again would have nothing to do with the turn signals.
I wanted to install it so badly and it got dark that I put them on with no signals until tomorrow. Had to rush because my fiancé doesn’t know I bought a bike yet 😂
Perfect
Great vid. Manny keep it up and want to see more vids. of new product on the market.
By the way thanks to you, speedcell lithium 5.0 battery are awesome my bike are back in business.
You are welcome Francis, thank you for all the support. Stay tuned for the upcoming video :)
Another Ratting Ducati