Про "Высоту профиля", что при нарезании обычным метиком 75% по отверстию 8,5 для М10 - нет, не слышали. Про то, что есть специальные , так называемые "Плашечные " метчики ( с немного уменьшенным средним диаметром резьбы, чтоб вкручивались в отверстие с резьбой - не, не знаем.
Oh man those drilling operations. Wouldn't it have been much better to pre-drill and then use something like a boring bar? Or an endmill? Aren't drills kind of rough for this sort of thing?
To ma być narzynka? Ona nie natnie takiego gwintu jak trzeba. Dlaczego? Spróbuj wkręcić trzpieniowy sprawdzian gwintu w pierścieniowy sprawdzian gwintu (np M8), to się przekonasz.
Nu o să fie folositoare! Materialul este foarte moale. Tratamentul se face în baie de ulei. Materialul trebuie să fie dur. Se decălește înainte de prelucrare, apoi după prelucrare se face revenirea termic.
Not worth the efforts for standard sizes. Regarding the quality: I bet he *has* good quality standard sizes and build M10x1,5 to compare his piece with what is in his set - seems a valid approach to me.
Про "Высоту профиля", что при нарезании обычным метиком 75% по отверстию 8,5 для М10 - нет, не слышали. Про то, что есть специальные , так называемые "Плашечные " метчики ( с немного уменьшенным средним диаметром резьбы, чтоб вкручивались в отверстие с резьбой - не, не знаем.
Oh man those drilling operations. Wouldn't it have been much better to pre-drill and then use something like a boring bar? Or an endmill? Aren't drills kind of rough for this sort of thing?
Exactly, I would have used a reamer to finish those holes.
Good idea to help yourself in a pinch. If you want to split hairs the tolerance on a tap and die is slightly different but can see it being helpful.
Like the use of a circlip as a stop !
Welch ein Aufwand, für ein Werkzeug das nur zum anschauen taugt.
Quenching in gramma’s candy dish, love it 😝
Me gustó mucho ....te felicito !
Nicee... I saw first time making this one type of die🙂
Nice video it gives me inspiration for a trapezium die
Thanks
sehr schon perfect vielen dank fur tecknik du gut machen 🌹🌹🌹🌹🌹👌👌👌👌👌👌
Необходимо её ещё заточить шлифовальной головкой по отверстиям
Its very very good
Quality dies are made of high speed steel. This one is not and will quickly dull.
You can just harden it yourself and oil quench if it’s just a punch and will last long enough and just be replaced when needed.
ОН НЕ МОЖЕТ РЕЗАТЬ РЕЗЬБУ , НАДО ЕЩЁ ЗАТЫЛОВКУ ДЕЛАТЬ НА ЗАХОДЕ
excelent... what steel is used?
Please try with MS material for threading
if this material is tool steel, then quenching in water is not suitable.
Spannend 😍💚
To ma być narzynka? Ona nie natnie takiego gwintu jak trzeba. Dlaczego? Spróbuj wkręcić trzpieniowy sprawdzian gwintu w pierścieniowy sprawdzian gwintu (np M8), to się przekonasz.
Bel lavoro una filiera lai tipo cementata
Excellent😍 amazing engineering👌
1:20 geile Idee,danke😊
Nu o să fie folositoare! Materialul este foarte moale. Tratamentul se face în baie de ulei. Materialul trebuie să fie dur. Se decălește înainte de prelucrare, apoi după prelucrare se face revenirea termic.
That’s pretty cool 👍
Case hardened ????
Dlaczego hartujesz w wodzie, a nie w oleju?
Gloves near a spinning drill ... no thank you.
Agree.
Похоже , как дирижёр и кучер !
Esto lo puede hacer cualquier persona,quien no tiene un torno en su casa y un soplete???cuántas chorradas!!!!!!!!!!
What kind of steel?
water hardening.
Would be interested also - chips look not like mild steel...
कौन सा यहलोहा है नाम बताएं
Lucrarea e "desăvârșită" !! Prin urmare la Obor în piață, o astfel de Filieră, costă 10-15 lei (2-3 euro) !!! 😮😮😊😊😂😂
Dat kan nooit werken, de draad heeft geen vrijloop en zal meteen gaan vreten.
❤❤❤❤❤
Сделать можно, а нужно?
Is this hard enufgh
Mentione the measurement in the subtitle...
Ofeishhhhhh
Do you realise how cheap these are to buy .
Think out of the box: With what you learned you can create rare thread cutting tools (threads with low pitch or even multi-thread tools).
Not worth the effort, and probably not as good as one made by a reasonable quality manufacturer
Not worth the efforts for standard sizes. Regarding the quality: I bet he *has* good quality standard sizes and build M10x1,5 to compare his piece with what is in his set - seems a valid approach to me.
Says a person who has probably never made anything..ever
@@mooreevairfo sure.
Stop being so American
Read all the comments. This is a good project to hone your lathe skills. Thanks for the video, really enjoyed.
Why invent the wheel? These dies are very cheap and the "technique" is not simple at all.
Have you seen how large farms are in Australia. Hours to the nearest hardware store.
WHY????