Hi MMM - I followed your instructions and successfully installed this timing mod to my Saito 60 and what a difference it makes. I can now start the engine by hand and the idle was just great with smooth transition to full power - all the lumpiness is now gone - thanks for producing the mod it really does work. Kind Regards Thomas
Does the electronic ignition delays ignition in function from measured rpm ? You should see to the code in the controller. Or build a new one ? have been doing that for a motorbike.
Good day sir I also own an FG60 - r3 I would like to know what you charge for doing the intake modification And do I need to send the whole engine or can you just do the rear plate ? I would also like to do your timing upgrade For improved starting and idling ! Also would like to know what peak rpm you are achieving after these modifications Thank you Matt
Did you know that everything what you say about the RcExl Ignition is totaly wrong? because you have to make the measurement when the magnet is leaving the sensor to adjust the ignition angle and not on the entry! (Look at RcExle Hompage for Ignition adjustment) We measured an original FG-60 and it has the perfect ignition angle! nobody needs an adjustable ring
Team Infinity hi Thanks for your input There are 3 comments on this video very similar to yours as well so let me explain how everyone is getting confused I have been working alongside RCEXL since 2012 when this first series of ignition release There are two different timing settings The timing that you guys are referring is for single cylinder and even fire twin engines and sensor is a single sensor that can work or 1 North or south magnet The time in this video is for uneven fired engines that is the way RCEXL has program this ignition unit it works with uneven fire twin 3 cylinders 4 cylinders 5 cylinders 7 cylinders and 9 cylinders ignitions And this unit would only fire in the location where the magnets is located and any angle the magnets are, the ignition will fire If you don’t believe me send a message to RCEXL The designer and programmer Thanks Morris
Hello! I also thought it worked this way, but it work like this. Specification for timing is 30BTDC when Magnet ENTER the sensor Under 200 RPM all 3 plugs fire for easy start. and fires WHEN MAGNET LEAVES THE SENSOR !!! After 200 RPM it starts to fire in sequence 1-3-2 and FIRE WHEN MAGNET ENTER the sensor. Curve is util 4000 RPM after that is 30 BTDC (or your static timing you put in) we recommend 30BTDC
Hi MMM - I followed your instructions and successfully installed this timing mod to my Saito 60 and what a difference it makes. I can now start the engine by hand and the idle was just great with smooth transition to full power - all the lumpiness is now gone - thanks for producing the mod it really does work.
Kind Regards
Thomas
Awesome video!! I'm smelling 2t stroke oil !!
Does the electronic ignition delays ignition in function from measured rpm ?
You should see to the code in the controller.
Or build a new one ? have been doing that for a motorbike.
Hi. Sorry which are the advantages making this upgrade? I'm the owner of one of these engines and I'd like understand. Many thanks.
Good day sir
I also own an FG60 - r3
I would like to know what you charge for doing the intake modification And do I need to send the whole engine or can you just do the rear plate ? I would also like to do your timing upgrade For improved starting and idling ! Also would like to know what peak rpm you are achieving after these modifications Thank you Matt
Hi
No need to send the engine in you can do it yourself, email us
Do also have adjustable magnet ring for FG90R3 ?
I have this engine with 51 gallons of fuel throw it. All stock. Runs like a champ still. No need too mod it.
HI MMM, are your 3 magnets at 120° - 120° - 120°, or at 126° - 126° _ 108° due to the connecting rods (master and slaves) design ?
3 magnets 126° - 108° _ 126 and 1 magnets at 125
Are you also gonna make prop hubs for the single cylinder gas engines?
Hello What size engine?
Morris' Mini Motors the Saito FG-20
why Saito cant make it perfect from the factory? What the heck? Why we always have todo all this modification s.h.i.t???
Did you know that everything what you say about the RcExl Ignition is totaly wrong? because you have to make the measurement when the magnet is leaving the sensor to adjust the ignition angle and not on the entry! (Look at RcExle Hompage for Ignition adjustment) We measured an original FG-60 and it has the perfect ignition angle! nobody needs an adjustable ring
Team Infinity hi
Thanks for your input
There are 3 comments on this video very similar to yours as well so let me explain how everyone is getting confused
I have been working alongside RCEXL since 2012 when this first series of ignition release
There are two different timing settings
The timing that you guys are referring is for single cylinder and even fire twin engines and sensor is a single sensor that can work or 1 North or south magnet
The time in this video is for uneven fired engines that is the way RCEXL has program this ignition unit it works with uneven fire twin 3 cylinders 4 cylinders 5 cylinders 7 cylinders and 9 cylinders ignitions
And this unit would only fire in the location where the magnets is located and any angle the magnets are, the ignition will fire
If you don’t believe me send a message to RCEXL The designer and programmer
Thanks Morris
Hello! I also thought it worked this way, but it work like this. Specification for timing is 30BTDC when Magnet ENTER the sensor Under 200 RPM all 3 plugs fire for easy start. and fires WHEN MAGNET LEAVES THE SENSOR !!! After 200 RPM it starts to fire in sequence 1-3-2 and FIRE WHEN MAGNET ENTER the sensor. Curve is util 4000 RPM after that is 30 BTDC (or your static timing you put in) we recommend 30BTDC
Your comment is correct for the single and flat engines, but not for the radials. (with N & S magnets)